Тёмный

Kawasaki 650 X2 Engine Disassemble & Rebuild 

Coyote Chris
Подписаться 2,1 тыс.
Просмотров 2,6 тыс.
50% 1

The little 650 that could LOL. Its time to get this little engine apart so we can get this ski on the water again.. We definitely had a few issues but I think we persevered. Thanks for watching, don't forget to like and subscribe!!!
Thanks for watching!🤘🏼
💥Don’t forget the 10% discount at www.capritools.com by using code “Chris2022”💥
💥 Parts Link 💥
2-stroke Oil: amzn.to/3yczo4T
Hood Pins: amzn.to/3Nnq9FM
Wire connector: amzn.to/3qDOxJE
Fuel line: amzn.to/3wVklOj
Primer kit: amzn.to/3wFigWg
Turf kit: amzn.to/3JC8xDX
650 Gasket Kit: amzn.to/3iEtSki
Gas Cap: amzn.to/3JIjgwN
Seat Cover: amzn.to/3DeAW0j
Lanyard Switch: amzn.to/3NkvUnM
TLD Grips: amzn.to/3qD684r
Protaper Bars: amzn.to/3iB1647
FTC DISCLAIMER: Coyote Chris is a participant in the Amazon Services LLC Associates Program, the eBay Partner Network, and other Affiliate Programs, an affiliate advertising program is designed to provide a means for sites to earn advertising fees by advertising and linking to the company's website.
"Due to factors beyond the control of Coyote Chris, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Coyote Chris assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of our videos. Due to factors beyond the control of Coyote Chris, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Again, any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video or any of our videos is the sole responsibility of the user and not Coyote Chris."

Опубликовано:

 

12 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 43   
@FrankRommerts-dr4yp
@FrankRommerts-dr4yp 3 месяца назад
Oh man, I can see so much potential in these engines, a set of nicely ported barrels with high compression heads, full circle crankshaft, PVL inner rotor ignition, Dual Mikuni SBN 44’s, V-force 4 reed valves, dual expansion chambers without water jacket, carbon silencers without waterbox….
@CoyoteChris
@CoyoteChris 3 месяца назад
You want all the POWAH and SOUND 😂
@FrankRommerts-dr4yp
@FrankRommerts-dr4yp 3 месяца назад
@@CoyoteChris You can’t go wrong when the amount of horsepower you produce equals the Decibel levels you produce…😂😂😂
@CoyoteChris
@CoyoteChris 3 месяца назад
@@FrankRommerts-dr4yp 🤘🏼🤘🏼😂
@StefanMailey
@StefanMailey Год назад
Ohhh, Teaser at the end! Nice! She's a beaut, Chris!
@CoyoteChris
@CoyoteChris Год назад
😂 I always wonder who can make it to the end of the video, every once in a while, I’ll leave a little teaser. Those are before the graphics, I got a few more videos to go.
@StefanMailey
@StefanMailey Год назад
@@CoyoteChris I enjoy your vids, buddy. Im slowly getting my X2 finished up. So I get excited when you post content. It keeps me motivated!
@CoyoteChris
@CoyoteChris Год назад
@@StefanMailey Thank you, I wish I could post more often but it’s a little time consuming especially with kids. 🤘🏼🔥
@1MichaelJones
@1MichaelJones Год назад
Coming also really nicely Chris!
@CoyoteChris
@CoyoteChris Год назад
Thanks 🤘🏼🔥
@lakelifeandbeyond
@lakelifeandbeyond Год назад
Great video as always!
@CoyoteChris
@CoyoteChris Год назад
Next Sunday will be the final assembly and first water test. 🤘🏼🔥
@FastFlash-dg2fc
@FastFlash-dg2fc 3 месяца назад
Is okay to use a metal brush on the drill to clean up the engine, like where the gaskets are? I noticed when I did it, it left surface scratches
@CoyoteChris
@CoyoteChris 3 месяца назад
No, the best way is to use a razor blade up right going side to side not trying to scape. You don’t want scratched or gouges on the surface.
@airsoftknives1234
@airsoftknives1234 4 месяца назад
How did reusing your head gasket hold up ?
@CoyoteChris
@CoyoteChris 4 месяца назад
I used a new one when I put the last head on. I did the compression test with a used gasket.
@jackmessel1136
@jackmessel1136 3 месяца назад
how much did the compression change after you put the new head gasket on it?
@CoyoteChris
@CoyoteChris 3 месяца назад
Honestly I never put a new gasket on it, seemed too high for what I was building.
@FastFlash-dg2fc
@FastFlash-dg2fc 2 месяца назад
Which Piston Ring brand do you like to use?
@CoyoteChris
@CoyoteChris 2 месяца назад
I prefer WSM 👍🏼
@FastFlash-dg2fc
@FastFlash-dg2fc 2 месяца назад
@@CoyoteChris my 93 x2 is stock, so I’d buy the 76mm ones? I’m guessing the 1mm over and other ones is because someone honed out their cylinders, and now they need a bigger ring?
@CoyoteChris
@CoyoteChris 2 месяца назад
@@FastFlash-dg2fc www.ebay.com/itm/120916172096?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=sl7sBe40RGK&sssrc=4429486&ssuid=2dovye7aStu&var=&widget_ver=artemis&media=COPY This should be what you need. 🤘🏼
@FastFlash-dg2fc
@FastFlash-dg2fc 2 месяца назад
@@CoyoteChris any advice on putting them on? can be flipped either way? And just have them lined up around the little lock for both of them, and squeeze? Bought the “Namura” rings and ruined them. I didn’t think they were good quality, so maybe that’s why. Idk. Probly user error lol
@CoyoteChris
@CoyoteChris 2 месяца назад
@@FastFlash-dg2fc here is a video that can help. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ipQGU9HLrKI.htmlsi=m_FuZcEQB34XsErx
@FastFlash-dg2fc
@FastFlash-dg2fc 4 месяца назад
Is there anything cheaper than the 1211 engine gasket silicone?
@CoyoteChris
@CoyoteChris 4 месяца назад
I’ll be honest, I’d be afraid to try anything different I know 1211 is amazing and it works every time.
@FastFlash-dg2fc
@FastFlash-dg2fc 4 месяца назад
@@CoyoteChris okay 1211 it is! Thankyou for the quick responses. My motor currently has 150 compression in the rear and 141 in the front, I’m currently at the part where I need to spray some blaster to get the motor apart to check the rings to the pistons. I’m guessing the front piston rings are messed up which is giving me 141 in the front. The head gasket looked fine, so does the top of the piston. Anything else you can think of if it’s not the rings on that front one
@CoyoteChris
@CoyoteChris 4 месяца назад
@@FastFlash-dg2fc yeah it’s probably the rings it may have ran lean on that front cylinder. If you didn’t wanna do a full piston bore then get the cylinders honed and new rings. That is if everything looks good. No scoring or bad spots in the cylinders.
@FastFlash-dg2fc
@FastFlash-dg2fc 3 месяца назад
@@CoyoteChris so taking a look at my rings on the front piston it looked great, the cylinder looked great as well. I did notice the front crank shaft was darker than the rear one, but as I was moving them I didn’t hear a difference in the nose of either. I’m guessing it was just the gasket and then the head gasket.
@CoyoteChris
@CoyoteChris 3 месяца назад
@@FastFlash-dg2fc more than likely the rings are worn. 🤘🏼 I’m assuming you are changing all the gaskets including the crank seal.
@jamesgustin4195
@jamesgustin4195 Год назад
I'm still in the middle of rebuilding my 650. Waiting on my crank 😢😢😢
@jamesgustin4195
@jamesgustin4195 Год назад
Good to know about that spacer too thanks.
@CoyoteChris
@CoyoteChris Год назад
@@jamesgustin4195 Yeah it would have sucked if I had sent it back without catching the one piece. 😂 Sometimes luck is on my side. 🤘🏼🔥
@jamesgustin4195
@jamesgustin4195 Год назад
@@CoyoteChris I also hit and ruined my stator. Good times. Live and learn.
@CoyoteChris
@CoyoteChris Год назад
@@jamesgustin4195 yeah well as you saw I broke the coupler like an idiot. 🤦‍♂️
Далее
Kawasaki X2 Final Assembly and First Water Test
14:08
Просмотров 4,5 тыс.
Китайка и Зеленый Слайм😂😆
00:20
Cute
00:16
Просмотров 6 млн
Wet Exhaust vs Dry Exhaust
26:57
Просмотров 353 тыс.
New Paint on the Kawasaki X2
8:11
Просмотров 858
4-STROKE REBUILD: Kawasaki Brute Force (Part 1)
11:33
Просмотров 139 тыс.
Kawasaki X2 Gets A Big Bore 838CC Yamaha Motor
15:43
Просмотров 19 тыс.