No video :(

Keep Your Engine Clean with This $30 Oil Catch Can Setup!

Подписаться 147 тыс.

Просмотров 97 тыс.

50% 1

It seems as though alot of you wanted to see a DIY Oil Catch Can setup! In this video i show you how to install one on pretty much any vehicle. It is a very easy job, and even the budget Catch Cans will help your engine stay clean! We also talk about what a catch can does, what a PCV system is, and why you should install one of these on your car, Jeep, or really anything!
Cheap Catch Can: amzn.to/3jo7GJf
Bolt on JK 3.8 Can: amzn.to/37FuOAr
Bolt on JK 3.6 Can: amzn.to/35tGhAt
Bolt on JL/JT 3.6 Can: amzn.to/35ur1Dv
Bolt on JL 2.0 Can: amzn.to/2TojksY
Or a Ripp Supercharger Catch Can with Jkgear discount code rippmods.com/c...
5/8" Hose: amzn.to/3kvvP1U
As you can tell, installing one of these on your Jeep wrangler or Jeep Gladiator is very simple. Its a great weekend project. it doesnt matter if your rig is a daily driver, a rock crawler, an overland exploration rig, or even just a toy to go mudding.
This is a good way to ensure that your engine stays clean. Gunked up valves and intake manifolds can lead to a small loss in power, and a drop in MPG over many years.
Now you may be wondering... Should i do this if i already have a lot of miles on my engine??
Yep! Its better to stop the continuous buildup. And once you stop the buildup, its easy to clean out the old gunk buy using some gas additives or a simple seafoam treatment!
I hope you guys enjoyed the video. Its been a long time since i did a DIY/budget friendly upgrade video, and hopefully you guys find it usefull!
See you later!

Опубликовано:

22 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1 тыс.

@corystaples8948 3 года назад

I need to stop watching this channel you’re making go broke buying all these things for my Jeep I didn’t know I needed 😂 enter me in for the drawing please!🤙🏼

@trentoncooke9353 3 года назад

lmaoooo same, i hate watching these haha

@allenvincentjr 3 года назад

I put one on my ‘17 jku a month ago with 36k on it. Just did an oil change and in one month the amount it caught was astounding. I did use an actual fitted kit with hoses and bracket by mishimoto. It was eye opening enough for me to comfortably recommend a catch can of any sort to fellow Jeepers, or any car for that matter.

@checkurselfb4uwreckurselfw173 Год назад

Like Ford, in their 6.7 from 2011-present, is still using a CP4 pump that will burst & brake up & inject metal shavings throughout the entire fuel system/engine - to the point the owner will have to pay $10K-12K to remedy. Ford knows this CP4 is a bust, but like their 6.0 engines, they do not care because their dealerships made bank off the frequent repairs. Ford sales a disaster prevention kit (LOL) for a truck that people paid $70K-90K. Great Ford. Really "Built Ford Tough". Now I hear that the Mopar 3.6L consumes oil like the vehicle just ate marijuana brownies & oil is its only appetite suppressor. So an oil catch can is most likely needed so one does not burn their motor up because the engine is "baked" (pun intended) & eating all the oil. People buy brand new vehicles at premium prices to buy POS's & have to modify their new vehicles to allow them actual longevity. Maybe the car moguls are wanting to build crap so we will all think EV is the way to go. IDK, but the post herein has validity & I am pissed because I own all motors herein (6.0, 6.7 & 3.6). IMHO

@spartan463 3 года назад

Its insane how a universal one is soo cheap but the JK kits are like 10x more expensive. Already on Amazon...

@trjnsd6874 3 года назад

Bought a used ‘05 WK three years ago and installed a catch can (BilletTechnologies) on the Hemi right away. Every oil change I empty about a third of a cup of oil out of the can! I learned about CC’s from RU-vidr videos. Thanks Y’all!

@leoaguilar5194 3 года назад

Inspiring channel to do hands on work on my Jeep Jk. Thank you man for giving us all this material to work with. You are awesome. Don’t ever quit making JK videos!

@legoMan104 3 года назад

yall give so much good info to the community

@davidcollie55 3 года назад

my yj 350 needs an oil catch can help me out please sir

@kenm9682 3 года назад

Watched the video and it reminded me to put on on. I'm going to mount mine closer to the engine so it stays warm and doesn't freeze up. The Joy of canadian winters

@rcud1 3 года назад

I saw this and put one of these in, get almost 1/2 a cup oil after just a 1200 miles or so. I got from UPR Products and came with really nice hoses and easy to remove to empty.

@ToxicGamer-bl2sc 3 года назад

Hey, I’d like to be entered or something. I’d love to install it on my own JK to keep that engine sparkling clean! Love the content, keep up the great work!

@DJLO50KC 3 года назад

Count me in the giveaway! I’d love to do another mod to drive my wife nuts! 😂

@MrStatic101 3 года назад

I have always despised pcv systems because of the whole concept of sending that filth back into my engine. I had no idea this even existed. Thank you so much for the great info. Also I’d like to be entered and win or something.

@chadalcock7275 3 года назад

Planning on installing one in my truck, so of course I'd like an entry. Great video except for 1 thing, the oil is going to destroy the heater hose. You need hose that is meant to handle oil.

@scottlyng7994 3 года назад

“Hey dad wanna have a catch..... can”

@auntjanet2346 3 года назад

Ha, you would win if 'twas up to me.

@iloveredandblack 3 года назад

“Just leave a comment”

@markblandford9346 3 года назад

I really appreciate this video. I have been seeing people use catch cans recently, and you did a great job of explaining it's purpose. Thanks a million.

@rmjryost 3 года назад

Installed JLT oil catch can on my 2016 JKUR. I get about 1-2oz oil collected every month! Yes they work. Is it worth it? ABSOLUTELY!!!

@davidahrens1269 3 года назад

I don’t want tell anybody how to work on their own rigs but I’d recommend silicone heater hose as oil can brake down the rubber in typically heater hoses

@jaybrown2424 3 года назад

GOOD DAY FROM OREGON, JUST WATCHED THE VIDEO, GREAT PRODUCT FOR ANY VEHICLE, I HAVE FOUR CHEVYS AND A 2012 JEEP WRANGLER SPORT, THANK YOU AND YOURS FOR ALL THE VIDS.

@chriscook8076 3 года назад

Very nice install. I like very much. I’m all about losing the oil out of the PCV System. Thanks!

@BadMotor187 3 года назад

Thank you, I had kinda written off a catch can as not necessary, but having watched this, I've changed my mind!

@danwilson2560 3 года назад

Glad you are showing a cheap way to do this. But I still think there is no benefit. Good on you for not pushing one of those expensive cans. For 30 bucks, it has low expense to go with the low (or no) benefit. I always enjoy your videos!

@JKGearandGadgets 3 года назад

I always thought the same way, until we opened up the Ls engine and spent 6+ hours cleaning up years of oil and carbon buildup.

@danwilson2560 3 года назад

@@JKGearandGadgets I think you'd have that anyway. Most carbon build up and oil build up would be there anyway. My 2008 Jeep 3.8 is clean as can be after 145k miles. Mobil 1 oil and Top Tier fuel had everything to do with it. But still, there's absolutely no harm in a catch can. So why not? Again, love your videos!

@bgt595 Год назад

New to the JKs land with a 2012 Rubicon and you're the first subscription regarding the specific vehicle.

@keithgranado1101 3 года назад

My wife and I just got a Jeep and we want to go to hidden falls. We’re very inexperienced and would love to join y’all on a trip. Love the channel guys keep the videos coming !!!

@KansasSlim64 3 года назад

Hey, Ben! Throw my hat in the ring! And thanks for your service! USA retiree here.

@amavisca77 3 года назад

Thanks for the follow up with the JT visor on a catch can. Your video with the JK surprising the amount of oil sent back into the intake. Thumbs up to your channel and content.

@kennywood6491 3 года назад

I love your show and would love to add a catch can to my 1982 Cj 5 project.

@adrianbargen9727 Месяц назад

Best for turbo charged motors because of increased cylinder pressure increasing blow by. And only helps direct injection engines from gunking up intake valves over time.

@gsdls 5 месяцев назад

Thank you for the video and thank you for adding the link to the specific hose that you got. I was able to go to Lowe’s and get some heater hose in 10 foot length and I’m ready to boogie and install this. Keep up the good work.

@gsdls 5 месяцев назад

You noticed any negative effects of having a catch cam or did you find that you had to replace a standard fuel line with a steel braided line?

@no2thenwo737 Месяц назад

@@gsdls You don't need a steel braided line, just a 5/8 standard hose. Mine has lasted for nearly 3 years and is good as new.

@gsdls 22 дня назад

FYI the Lowe’s brand is no good cause it’s not for Under the hood application. It collapses on itself. I ordered the one recommended here.

@Mattie_Ice 3 года назад

This is a common mod on 7.3s also know as a CCV mod. Crank case ventilator. Some guys dump to atmosphere simimar to semis but end up with a truck smelling like oil and smoking. Also whats important is to nevet let the oil freeze in cold climates otherwise your crank pressure will sky rocket and you could throw your spark plugs or injectors. So to remedy this keep it close to your engine to maintain warm oil in cold climates.

@JCJustice1 3 года назад

I had honestly never heard of this option... Awesome information. Toss my name in the hat. Appreciate all the info you guys put out! Maybe one day I'll run into you guys at a Jeep meet here in Texas.

@mtoddvan 3 года назад

Enter me too please! Not just the residual oil going into the intake makes it messy, but that oil can create deposits of carbon on intake values & can cause values to stick. Lol that I was the only person to invert pcv & pvc!

@pennypackmtb2542 3 года назад

I'm overhauling my WJ and the oil catch can is on the list of upgrades. It is a list, after all it's a 20 year old 4x4. Can't imagine the CRUD inside.

@joediver69 3 года назад

Just got my 1st Jeep it's ATJ 2.4 l 6 speed manual when I always wondered about the catch CAD now I'm definitely gonna get it thank you guys loved the video

@MichaelCook1981 3 года назад

PVC is made from oil...so you're good 👍. I always say PVC , instead of PCV. I took my engine apart to fix the Pentastar tick, was replacing the intake manifold gasket and saw oil under the gaskets.

@jeffleuenroth7849 3 года назад

Good point about not pouring that oil back in the engine.

@jad6126 3 года назад

Thank you. I ordered the very can you have listed in the description. It looks great especially for $28 compared to some other name brands that are over $100. I installed it on my 2016 JKU today and fabbed a bracket from some aluminum angle stock I had left over from another project. I mounted it in the same place you have yours on your JK. I removed the OEM bolt on the fender (where your Switch Pro pod mounts) and put a bracket there to hold the can between the ECM and the brake module.

@daniellorenzo7285 3 года назад

Ok Im in I will try to installation now that I understand more about Catch can thanks.

@williamh6547 Год назад

I prefer to vent DIRECTLY into the atmosphere 👍👍 make sure I do my part.

@irismercado1288 3 года назад

Always good to see that you’re always doing something new something different something better in your jeeps and your wife’s jeep love you guys show keep up the good work and be safe

@user-sv8mq2eq3z 2 месяца назад

You still need to check your Pcv valve every 30000 miles because of seal wear on Pcv that rides on the cam shaft that will allow allot more oil to intrude past into your catch can. Just changed Pcv valve at 58000 on a 2019 Ram 1500 and seal was worn out .will be looking into catch can Thanks Jk gears and gadgets

@davidbaziii9779 3 года назад

I'm totally doing this for my YJ and my 3.6 Charger now. Great video. Love both of channels you guys have!

@bongobrandycasy Год назад

rubicon phil from NL, just found your videos , watched your oil catch can video , definitely getting one.

@josh_rit8045 3 года назад

Ya count me in! That oil catch can would be sick! Great video too!

@christopherkiger3354 3 года назад

you can throw my name in too! love that you show and tell... real world jeep diy!

@3brothersinarmsoutdoor43 3 года назад

This is awesome to find an inexpensive way to do a catch can. And free is even better

@fox351swap 3 года назад

Great item to add on to any jeep.

@interwurx 2 года назад

I just found your channel. I am certainly enjoying your videos! FYI: the cost for this on Amazon is now $150.

@MrHotrodder1964 Год назад

Change oil often, every 3,000 to 5,000 miles, us a high quality synthetic, like Amsoil or Royal Purple.. will make a big difference. I put an oil catch can on my 2019 Silverado, hardly any residue on two oil changes. On the right track.

@pbhound 3 года назад

I will be adding this to my Amazon list

@edwardluciano6885 3 года назад

I just got a beautiful black miniature lab. Any dog hacks for taking them off roading with the fam? I think that would be an awesome, unique video!!!

@andrewmason1111 3 года назад

Nice video Ben! I want to personally thank you for finally explaining in detail how the PCVsystem works. I ordered the plug and play model from your link, thank you again! And say hi to Cassie for me! The North East sure missing you! But you gotta go to Texas. Just as long as you dont become Dallas Cowboys fans! Lol!

@RyanBennett_Gpd605 3 года назад

I could always use a catch can! Great work guys!

@unwrangler11 3 года назад

Thanks for a great idea! I’ll be doing it as soon as it comes in.

@switchbackoffroad 3 года назад

Missed your videos during the move. Glad y’all are back!

@sailme2day 3 года назад

yes liked the install video , should help keep that oil clean longer . I am interested in being in your drawing for a free unit. Thank you .

@oscarpatino330 3 года назад

Thanks for the video Buddy.... i love all of them, you've been an inspiration for me.... keep up the good work as well Cassie's channel....

@JKGearandGadgets 3 года назад

Thank you!

@oscarpatino330 3 года назад

@@JKGearandGadgets always… stay safe!

@that68lifestyle 3 года назад

I have planned to put one on my JK. I have one on my classic car. Works great.

@davidhunter3191 3 года назад

I could use one myself. Love the the channel bud, and Cassie's too.

@davidhunter3191 3 года назад

@@Jarod1941 yep. Jeep Gear and Gadgets.

@johnhansen3298 3 года назад

Great product...👍🏻it’s on my wish list, to install on my wife’s new gladiator, AWESOME VIDEO, watch and like all your videos, good job great channel and information! 😃🤙🏻

@Bennett-xo6iu 3 года назад

You guys are doin such a good job on both your channels.. keep the videos coming...

@damonvibbert2933 3 года назад

Love this idea. Makes sense to separate the oil out to eliminate issues!!! Count me in on the giveaway!! You two are great!

@JonnyBgooD007 3 года назад

What are the odds, I was just looking to buy this. Specifically the RIPP Supercharger Brand, being that it's on sale. Great video man!

@JKGearandGadgets 3 года назад

Dont forget that the code Jkgear will get you a 12% discount!

@JonnyBgooD007 3 года назад

@@JKGearandGadgets that's right and will do! Thanks for the heads up 🍻.

@gregnixon1296 3 года назад

I check mine every 500-600 miles. I get 3 tablespoons of a cream colored watery mix. I let it settle in a small glass to allow everything to separate. One third of that is oil. The rest is water and gas. 310k miles, 2002 Toyota.

@oDphanatic79 3 года назад

A catch can would be awesome for my mini van!

@jim9win 3 года назад

After watching this I got one to on Amazon too thank you for the idea

@lonewulf0328 3 года назад

Looks like a useful setup for my JTR.

@jaydenschmidt1350 2 года назад

Just ordered mine, so happy I found this video 🙌

@josephfink5029 3 года назад

I’d love to be entered into the chance to get the catch can. Nursing school is rough. I could use some wrench time with my son to relieve some stress!

@zyt2785 3 года назад

Love your channel! One of the BEST on YT for Jeepers. Please count me in the give away!

@davidwilkerson42 3 года назад

hey Ben keep up the great work. your videos have help me in my build. I have a 2009 JKU on 37 's I love it. so glad y'all moved to Texas. we are in west Texas hope to meet y'all in person some time. Thanks again

@bradorr7223 3 года назад

Appreciate you and Cassie. Love the channel!. 1st time commenter long time watcher ;). I have a 2 door JL Rubicon that would love the catch can.

@Carl-vx9ws 3 года назад

🤔 something to consider for my 2015 JKU thanks for the video. 👍🏼

@Cbfair1 3 года назад

Nice DYI project Ben.

@royreedy3714 3 года назад

I would love to try this on our 2000 TJ. Love the information in your videos

@jeremynichols1326 3 года назад

Great video. Ordered one for my jk while watching the video hopefully win this one to install on the other jk

@ArdisticCustoms 3 года назад

You can throw my name in there as well. I need one for my wife’s JL and then one for my LJ. It would be nice to only have to buy only one....lol. Love the videos, both of y’all keep up the awesome work!!

@lukemoser01 3 года назад

I just recently bought a JKU and started looking up RU-vid videos and came across your channel. The videos are great I just watched the ones about the headliner and the J.W. Speaker head lights. I'll definitely be doing the headliner. The headlights are great but a little pricey for me. I'm sure I'm to late for the catch can give away but if not woo-hoo I have a chance lol. Thanks for the great info on the JK. I just noticed hood the shocks on your JK hopefully the is a video on it. I'm going to look now haha

@White.Elemant 3 года назад

Hmmm... Legend has it, 3.6 pentastar has two pcv lines... haven't checked myself (freezing outside, garage full of junk), but if that is the case, you'd (I will) need a twin inlet catch can, or a Y -joint somewhere along the line...

@JKGearandGadgets 3 года назад

Usually setups with 2 pcv lines only have 1 dirty line

@garyhenion9459 3 года назад

Nice vid Been thinking of doing this to my Gladiator as well as a bunch of other stuff

@JonSoucy 3 года назад

I installed a catch can on my Infiniti G35 after opening the intake and seeing the oil puddles, it's amazing that OEM's wouldn't add this by default after seeing the amount of oil blow by. It really affected my Infiniti as I had an aftermarket Vortech supercharger and oil is known the lower gasoline octane which is the last thing I needed when I was racing. I never bothered with my 2016 JK because I never drove it hard, but I just ordered a 2021 Gladiator EcoDiesel and I'm trying to figure out if it's really needed since ... ya know it's an oil burner and all! Oh and if it's not too late I'd like to entered ... or something. Love your videos btw!

@simbajku4495 3 года назад

You guys definitely got me thinking about a catch can for the new LS3 recently installed on Simba 👌🏼 thanks guys 🍻

@owenwest2402 3 года назад

I'm so needing to do this cheap easy mod when I do the rebuild on my 4.0 288k no catch can and it shows! 😆

@davidmiskiewicz5655 2 года назад

I will be doing a can setup on my 4.7 wj. Luckily I can cap off the PCv valve at the oil fill neck, and catch the mist from the back of the heads to the can and just have a breather on the can outlet port. Luckily this engine runs on MaP vs MaF so engine wont see any difference.

@markp9474 3 года назад

Great video! Count me in on the catch can giveaway... need one for my el camino LS swap! thanks

@redbarry2540 3 года назад

I’ve been trying to figure out what to do for my JKU, an 08....? Would be nice to have a quick recap, and maybe see what you did again?

@herbscott11 3 года назад

Count me in on the catch can give away. Keep them videos coming!

@smyerpropertiesllc3858 3 года назад

Great option. I’m going to do this to all my vehicles! Keep em coming

@jimmythesaint6184 3 года назад

I CAN dig it. Count me in for this contest!

@jonathanbarner5171 3 года назад

Thanks for that information!! I’m new to the Jeep world and I love you guys are doing lots of great upgrades.

@daivdpeach2740 3 года назад

Been watching for a little while, love you guys!

@AlejandroSanchez-qo8qy 3 года назад

Definitely wana see the results for I have a gladiator myself and yea it be awesome to be entered, seems easy enough to install

@smokeGR14 3 года назад

I have a 20 wrangler sport...love hitting the trails. In it...been to Rausch creek 2 twice ..I have 14k on it already just got it may 2020....I'd put this on..

@daughertypb3663 3 года назад

Enter me. Great idea. Great video, as always. 👍

@chrisreports9031 3 года назад

Awesome video and useful content and budget friendly 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏✌️

@michaelcraddock9905 3 года назад

Great video! Looking forward to seeing how much oil the fresher engine puts out.

@checkurselfb4uwreckurselfw173 Год назад

@WillysRubicon 3 года назад

Good review and quality as always, but some of the PCV history information and how it works or what it is for is incorrect. But basics for understanding positives of a catch can is good. Thanks!

@kbialo2340 3 года назад

I’m in. Seems like a no brainer to protect the engine long term.

@corbind.9395 3 года назад

Looks super easy. Wouldn't mind installing one myself! Thanks for the show how.

@richardalderson1868 3 года назад

I'd like to be entered or something, lol. It would be my first engine type mod for my JL Willys. Keep up the great works and as always enjoy yours and your wife's videos.