Тёмный

Keeping the Dodge Ram Level while Towing: Air Lift LoadLifter 5000 Air Spring Kit Install 

CJ Bronco & F-150
Подписаться 76 тыс.
Просмотров 58 тыс.
50% 1

Freddy shows you how to install a Air Lift LoadLifter 5000 Air Spring Kit on your 2009-2018 2WD or 4WD Dodge Ram 1500.
Purchase Product Here:
www.cjponyparts.com/air-lift-...
Being able to tow with your truck is awesome. You can help out the family when someone is moving, get a friends broke down car to safety, and so much more. In a way, it makes you a hero, saving someones day one tow at a time.
However, there's some things you should be aware of. Steering, braking, and more can be hindered when towing heavy loads.
Lucky for you, Air Lift has a way to improve your braking, steering, spring rate, preventing bottoming out, and decrease sway with this LoadLifter 5000 Air Spring Kit.
Using this kit is very easy, letting you give air to the springs when you’re hauling a heavy load to ensure truck stability and deflating them when you’re done.
This kit gives up to 5,000 pounds of leveling capacity for your 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017 or 2018 2WD or 4WD Dodge Ram 1500.
Check out more parts from CJ's here:
www.cjponyparts.com/ram-suspe...
Check out more parts from CJ's here:
www.cjponyparts.com/air-lift/...
Subscribe to CJ Off-Road on RU-vid here:
/ cjoffroad
Follow CJ Off-Road on Instagram here:
/ cjoffroad
Music Provided By:
www.epidemicsound.com/

Авто/Мото

Опубликовано:

 

19 июн 2018

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 35   
@Oakley_Shooter
@Oakley_Shooter 3 года назад
I just spoke with Air lift - Part # 57370 has been discontinued. The reason for this is not cutting out the bump stop bracket caused extra height on top of the bag and gives a really rough ride (because it's almost compressed without any PSI) so when you're not towing it's a rough ride. By removing the bump stop bracket you're allowing the bag to open all the way up so when you don't have a load you're basically resting on your coil springs only.
@RamBayou1
@RamBayou1 2 года назад
I have this 57370 kit and will attest to this. I just pulled it off today because I got tired of the rough ride unloaded. Think they will supply new brackets for those of us that had the older kit?
@guyramsden2526
@guyramsden2526 2 года назад
Nice job explaining!! Thank you!!
@forthefunofit5487
@forthefunofit5487 3 года назад
very cool spring kit. I like it. By the way dont call this a Dodge. Its a RAM.
@yerwrng
@yerwrng 3 года назад
It has gas engine so just call it gay .
@forthefunofit5487
@forthefunofit5487 3 года назад
@@yerwrng Pathetic comment.
@yerwrng
@yerwrng 3 года назад
@@forthefunofit5487 Hey go sit on a broom stick " for the fun of it " .
@forthefunofit5487
@forthefunofit5487 3 года назад
@@yerwrng I now can understand why you dont have any friends or why girls wont date you. No wonder you cant hold a job and drink so much. Good luck to you.
@yerwrng
@yerwrng 3 года назад
@@forthefunofit5487 I think I've been drunk once in my life and I have no issue with holding a job or anything else you were shooting for Tex ...lol... did a set of pink bells and chaps come with that truck , well you know what you say RAM the Father Dodge the daughter.
@briangammons8081
@briangammons8081 5 лет назад
I installed the rough country leveling kit. I have 2” spacers in the rear. How will this affect this kit as far as install and is it compatible or is there two inch spacers for the bags I need to purchase separately?
@johannl.6004
@johannl.6004 3 года назад
Hi, when you have to lift the axial to install the kit, can it be dangerous in offroad? Because the bag are not long enough?
@jmoretti913
@jmoretti913 3 года назад
Why aren't these tied tog to one Schrader valve to avoid uneven distribution?
@xforce708
@xforce708 Год назад
Why don’t I see the product available for the Ram on the website in the link?
@krisreid6647
@krisreid6647 Год назад
Do you have a part number for that kit possibly. All the new ones that I can find require the bump stop bracket to be cut off
@alycastillo7325
@alycastillo7325 2 года назад
Hi do you know what is the difference between 5000 and 5000 ultimate plus ?
@ulicsc.5103
@ulicsc.5103 5 лет назад
Si I can fill them up and put 5,000 pounds load on the bed and this bags aren’t going to blow out?
@LuisGarcia-so1kk
@LuisGarcia-so1kk 4 года назад
Does this product cone with spacers for lifted trucks i have a 6in lift on my dodge ram 1500??
@grumpz0429
@grumpz0429 3 года назад
So with the new kits they make it to where you have to grind off the top bump stop piece!? That’s stupid.
@tvcomputer1321
@tvcomputer1321 2 года назад
it is stupid and i dont want to fuck around with cutting parts off and drilling holes in shit while this baby is still under warranty. i will have to go with the ones that go inside the spring for my load leveling needs. maybe in combo with the timbren ses to replace the factory jounce things without destroying anything
@kirkgreensr10
@kirkgreensr10 4 года назад
What is the part number to this?
@Daniel-fd8bb
@Daniel-fd8bb 4 года назад
I'm guessing its 57370, the 57465 requires grinding of the bump stop plate. I can not find this kit anywhere. The link left in description doesn't even sell this kit. I've tried contacting air lift to no avail. But have read the 57370 is a true bolt on like the kit in video. Amazon has the 57365 if you want to grind off and drill into frame for 284$
@rvtherapy5316
@rvtherapy5316 3 года назад
57370. I found one on ebay. They have 7 left
@RobertDV88
@RobertDV88 3 года назад
These links are bullshit. All it brought up was a compressor.
@Jshu76
@Jshu76 6 лет назад
Whats that kit number , thats little different from the other one i saw where you had to cut the jounst bracket off
@CJBroncoF150
@CJBroncoF150 6 лет назад
Here's a link to the kit, pretty easy to install!
@chris69101
@chris69101 6 лет назад
Hahaha I guess I just answered my own question to the email I sent to airlift. It’s a newer version that you don’t have to cut and faster install time! Awesome!!!!
@braddavis9982
@braddavis9982 5 лет назад
CJ Off-Road
@hotshotray3244
@hotshotray3244 4 года назад
@@CJBroncoF150 do you have the link to the kit?
@rasmousein
@rasmousein 4 года назад
@@chris69101 Wich one came first ? 57365 or 57370 The 65 is the one required cutting. The 70 is the bolt-on. I have the 70, and I would need an extra 1" raise on the rear spring to have proper airbag height. My truck kick
@mikel.laughridge9480
@mikel.laughridge9480 3 года назад
Dodge Ram??? LOL where have you guys been? Its Ram. Go back to 2008 I guess.
Далее
Dodge 1500 Air Lift 1000HD Air Spring Installation
19:46
Bike trick and Bro's aura...
0:11
Просмотров 5 млн
Cracked Windscreen Restoration!
0:41
Просмотров 4,5 млн
Сравнил два перфоратора🤯
0:29