Hi, I found out here on RU-vid that the QS138 engine has aluminum terminals, and the wires are made of pure honey, and they have not been cleaned of varnish, this leads to ignition of the engines. Can you check how you are doing with the q s 138 engine, the same? As for the long-range drive controller, there are aluminum studs inside that are used to connect phase wires and a battery, this is also bad
Hello. I have QS180 (encoder) + fardriver ND721200B. If I set the Motor Direction: 1, rotation clockwise. If I set the Motor Direction: 0, then first the rotation is coclockwise, and then clockwise. Tell me, what could be the problem?
@@IncredibleCisco you might not know this but unlike asi controllers fardriver has built in precharge circuit so it’s not required to run a precharge resistor with them . Asi on the other hand it’s required
@@IncredibleCiscowe asked Fardriver why a precharge resistor is not included in the circuit diagram included on spec sheet they advised it’s not required and is integrated into the design . I can only imagine that means a precharge resistor is built in or that the switching stages are not effected by inrush current
I have a question what are the pid settings nobody has videos explaining it all they say is leave it alone. That doesn't answer the question there is benefits in the pid settings
What app is that you’re using for programming? Does that come with that controller or the motor? I’m a newbie and about to get into my first build and want to use that qs180. They sell kelly controllers but do you recommend this one you’re using in this video?
Have to say this was a much anticipated video , I’ve been looking for some performance footage of this new motor , picture this in a quad bike frame , appreciate this a lot
Hello, I immediately apologize for my English, I'm from Russia, I need your advice, how many kilowatts can be used for a long time of the qs138 3000w V1 engine, and what current ampere can be used as much as possible?
@@tsergio111 okay maybe this is confusing but in the function paras section of the app, try these settings. Disable the brake, park, follow, PC123 Set CAN to none Set gear to default D Sport is the only throttle curve that will feel choppy imo I haven't got it all ironed out yet but this and sport mode got me to a good starting point on my set up.
@@tsergio111 aight try this. Release throttle = 0 Weak response = 0 (I have it set to this but I haven't expirimented with it yet) Release throttle = 0 Throttle acc step 224 Double check you have sport mode set sometimes it goes back to line or whatever idk. Set ratios in speed 500rpm-5000rpm to 100%, this is how you really tune throttle response once everything else is working right if I understand correctly There's some good fb groups like surron Segway modders
Some of these videos I swear people want you to watch them have fun but they don't want to tell you where to get these motors stuff that they have in order for you to have fun also. SMH
hey man your chanel is great for nerdy guys like me ! anyway i was wondering ,how much would a motor and control system like that cost then man? that motor in a decent frame would be great it would be nice with like a motorbike style 6 spd gearbox i reckon anyway cheers dude
Prices really depend on where you are based as these are bulky items shipping can cost a fair bit, if you give us an email we can provide you more information in terms of cost kilovoltbikes@gmail.com
What are you going on about positive goes tight ? If your talking about the orange cable that starts up the controller it doesn’t want bolting down in a test environment , Also can you please explain how your supposed to test with negative when the wire you need to activate the controller connects to + Silly comment from another “armchair” expert 🤦🏽♂️⚡️
Always enjoyable. What cells are the cells in the battery? I wonder if they they will make encoders to be able to use a range of controllers? That acceleration is very smooth. Right now it seems you've got a pair of the motor and the controller. We both know that motor can handle more than what that controller puts out.
Thanks glad you enjoyed it . They are the EIG C020B cells 3.7v 20ah 100A in 20s1P for the bench test battery . This motor is going to need a bigger controller maybe a ND961800
That motor is BONKERS! I think the motor worked the first time you throttled- it just spun the earth 😆 I just dropped a vid on undocumented Fardriver / Kunray motor issue. With your experience, it would be interesting to see if you've seen my throttle issue. Subd for more either way!
