No video :(

King quad 700 replace stator

Подписаться 4 тыс.

Просмотров 30 тыс.

50% 1

In this video show how to take the side cover off to replace the stator hopefully fixes the problem with burning up the regulator

Опубликовано:

21 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 14

@harrysplace2024 Год назад

Thanks buddy! Good video. Helped me a bunch.

@robadoba8497 3 года назад

Did this work for you? You said you would post a reassembly video, but I couldn't find it in your page.

@hnuggets6638 5 лет назад

I'll check it later thinks guy

@larsaolhem6771 2 года назад

Hi. did your repair work? I have the same problem on mine

@hnuggets6638 5 лет назад

I got a question I changed my atv oil on king quad 700 let it run for a bit and turned it off and checked the oil and there isn't no oil on the dipstick can you tell me y

@maxamhomerepairAndatvrepair 5 лет назад

If you didn't put any oil in your oil filter when you start it up it some oil will go to filling it up.

@kingwillie4789 3 года назад

Where does the positive and negative wire go and what the wire called if I was ordering it

@hnuggets6638 5 лет назад

I subscribed to u

@BandA514 5 лет назад

Did that fix the problem. I’m having the same issue I’ve gone through 3 regulators.

@zzzzzz...9902 2 года назад

The charging system on small engines like these are very simple. The stator produces AC voltage that then is fed into the regulator. The regulator then converts AC from the stator to DC voltage, which then is fed directly to the battery. So just make sure the wires from the stator to the rectifier are good and the wires from the regulator to the battery are good, if not then fix it. If there good and since you already replaced the regulator, then by default it has to be the stator assuming nothing funny is going on with the battery.