Kohler Command Lawn Mower Stator Replacement

Подписаться 609 тыс.

Просмотров 272 тыс.

50% 1

This video provides step-by-step instructions for replacing the stator for twin cylinder Kohler Command small engines, commonly found in riding lawn mowers, riding tractors, zero-turn radius mowers, and commercial walk-behind mowers produced by Kohler, Toro, Exmark, and John Deere. The most common reason for replacing the stator is when the battery keeps draining.
Click here to purchase part #237878-S: www.repairclinic.com/PartDetai...
Additional lawn mower repair, troubleshooting tips, help with finding your model number, and part replacement videos: www.repairclinic.com/RepairHel...
All of the information in this stator replacement video is applicable to the following brands: Kohler, Toro, Exmark, John Deere.
Tools needed: socket wrench, multi screwdriver, nutdriver bit, Phillips bit, flat-head bit, strap wrench, hammer, puller
Model displayed: Kohler Command small engine CV2375523
Connect With Us!
plus.google.com/+repairclinic
/ repairclinic
/ repairclinic
/ repairclinic
Join our free VIP email list for discounts and money-saving tips: tinyurl.com/pnnh3be
Check out our blog: www.DIY.RepairClinic.com
Don't forget to like and comment on this video, and subscribe to our channel!

Хобби

Опубликовано:

3 авг 2011

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 50

@shaggydogg630 3 года назад

Fine video. Cutting grass last night, went to restart my mower and click . This will help.

@1noreaster 7 лет назад

Awesome video.. very easy to follow

@Alihelmee 11 лет назад

excellent work

@umairabbasi4965 6 лет назад

Sir you are great men

@strickdog87 6 лет назад

What size of a bolt did you use on your pully to brake it off at the 3:16ish mark.

@dannilaser16 4 года назад

Great video. Thumbs up.

@youzhogliu2660 8 лет назад

Thank You For Share

@russwoodward8251 Год назад

Very nice video. Thank you.

@BaronTak 11 лет назад

Awesome...THANKS!!

@colt5189 Год назад

What's the thread pitch of the long bolts going into the flywheel? As I can get 5/16-18 and 5/16-24 started, but then they get real hard to turn. And so I can't figure out what the correct bolt size is?

@repairclinic 11 лет назад

Thanks!

@charliemartin7665 7 лет назад

Hey you with the teeth I have Small Engine Shop my self. I stared fixing LoEnd equipment This year has been a lot better Irealy want to THANK You for your help and the laugh S GOD BLESS

@FloridaCoastalGuy 8 лет назад

Very good video!

@repairclinic 8 лет назад

Thanks!

@huh8896 3 года назад

whats the part number for the voltage regulator on this exact motor. i have the same one and my voltage regulator is bad, but the sticker with the engine model number is gone. this is the closest ive gotten to it yet

@victorchale4702 4 года назад

Where can i buy that strap wrench? Is dificult get it

@repairclinic 11 лет назад

No problem!

@rorycorpuss 9 лет назад

Cool video!!! thanks

@repairclinic 9 лет назад

rorycorpuss You're welcome!

@user-ks7ri4is2y Год назад

I'm trying to figure out on my Kohler stator which wire is hot and ground...it has 3 wires ..one purple..2 green ...on one of the green wires it has a connector clip at the end which is bot connected to anything..im trying to rewire it to the battery.

@monke306 7 месяцев назад

On my craftsman Lt 2000 there’s 2 brown wires keeping me from taking the stator off

@MrJamesFoxx1 8 лет назад

thank you

@repairclinic 8 лет назад

+James Edwards You are welcome.

@fhsbiv 8 лет назад

Thanks for the video. I followed all of these steps. I even replaced the regulator rectifier. I am still not getting the battery to charge.

@candycoatedrazrbladz 7 лет назад

on some mowers there is a fuse inline on the charging system.Check all fuses.

@joem6114 5 лет назад

Check your wire harness

@frankdavidson9675 3 года назад

measure the dc to groun a regulator with eng running should read over 12 upto 15 v dc on the center tap on reg if not check the two out side lugs fr 40v ac to ground with eng running if no volts is the stator set your meter on ohms conn leads to th plug thatyou unplugfrom regulator to the outside conn you shoud get a reading in ohms you are reading thru those coils if no reading you ma have a wire problem going to stator it is open somewhere you will need to go into it then

@robertduncan2742 5 лет назад

Torque specs on the flywheel, I have a deere with a kohler 16hp and the wires heat up where the regulator plugs to the wires

@ack1911 11 месяцев назад

I'm not sure what model engine the 16HP version is, but In the Kohler manual it says 55 ft-lbs for the flywheel retaining screw, on KT715 through KT745. Looks like you wanted to know this 4 years ago so I'm just posting this for posterity.

@elijahg470 8 лет назад

can you do one a kohler command sp 27

@repairclinic 8 лет назад

+Elijah Ritz We'll see, thank you for the feedback.

@macknumber9 6 лет назад

How do I know it's the alternator and not the regulator? I'd hate to pull the flywheel off and all that if it was just the regulator...how to confirm?

@frankdavidson9675 3 года назад

read my comments

@umairabbasi4965 6 лет назад

Sir generator all parts with name upload video

@josephgarrett9557 7 лет назад

Can I rent the puller at a common store like AutoZone?

@willrobinson9575 7 лет назад

You should be able to. My local Advanced Auto will loan tools for free. You just have to leave a deposit until you return the tool.

@joem6114 5 лет назад

Shouldve tested it before put back together

@wondernutts 4 года назад

So...watching the video still leaves me like....oh man...this is gonna sssssuuuuuucccckk! Cause we ALL know...it ain't gonna go THAT smooth.. Great video though.

@frankdavidson9675 3 года назад

its rare that you need to replace the stator i have worked on lawn mowers and out board motors many yrs iv yet to replace a stator and im 86 yrs young lol

@frankdavidson9675 3 года назад

test this way at the regulator on the 2 out side lugs to ground if stator is good and the eng is running you will read 40ac each outside lug if no ac its bad stator if you read ac but read no 14 dc on center lug replace regulator make these test prior to taking any thing apart

@wadepatton2433 4 года назад

What is the AC output here? I just replaced one. Same voltage output. No improvement. Waste of time and money.

@frankdavidson9675 3 года назад

the ac reading with eng running should read up to 40 volts ac to ground measyerd at the regulator on the two outside lugs read lug to griund on each one the lug should read over 12 vdc to ground up o 14v if its ok if ac is missing its the stator if dc is missing its the regulatoryou wlii have dc from battery on that center lug if it charging it will be up to 14v dc do let that confuse you

@wadepatton2433 3 года назад

@@frankdavidson9675 Yes, I found the information and got my power back. Required new magnets.

@chadsimmons6347 8 лет назад

" HEY REPAIRCLINIC.COM ) this is great info ( BUT ) why not grab a 15 year old yunk yard special & tets see how fast your so-called "MECHANIC " can take it apart & get running

@repairclinic 8 лет назад

+Chad Simmons Thank you for the feedback.

@chadsimmons6347 8 лет назад

"HEY REPAIRCLINIC " i am really grateful for your efforts to help us help ourselves