Kohler Twin Valve Problems

Подписаться 134 тыс.

Просмотров 13 тыс.

50% 1

amzn.to/3VTkWsr Compression tester
amzn.to/3ICAihY Lucas Assembly Lube
amzn.to/3VVT2fv M12 Electric ratchet
In this video, I take a look at a Kohler 20HP twin engine with a valve problem.
Help support Doublewide6 Repairs LLC by sponsoring his Patreon Account
/ doublewide6
Doublewide6 Repairs LLC has a Master’s Degree in industrial technology with a specialization in Manufacturing, due to factors beyond the control of Doublewide6 Repairs LLC and anyone featured in his videos, I cannot guarantee against improper use or unauthorized modifications of this information. Doublewide6 Repairs LLC assumes no liability for property damage or injury incurred as a result of any of the information contained in this video or any of Doublewide6’ Repairs LLC's videos. Use this information at your own risk. Doublewide6 Repairs LLC recommends safe practices when working on equipment, power tools, chemicals, electronics, electrical systems, vehicles, and or with tools seen or implied in this video. Due to factors beyond the control of Doublewide6 Repairs LLC, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Doublewide6 Repairs LLC.

Развлечения

Опубликовано:

7 янв 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 39

@doublewide6 Год назад

amzn.to/3VTkWsr Compression tester amzn.to/3ICAihY Lucas Assembly Lube amzn.to/3VVT2fv M12 Electric ratchet

@XPFTP Год назад

lil hint... rope.... stuff the cyl with rope bring the piston to TDC place something to hold the flywheel. it will hold valve up then pull rope out.. works the tits.

@Andy-nm9dw Год назад

An easy way to accomplish the valve spring issue: use a leak down tester to pressurize the cylinder to hold the valve out and put a piece of plastic on the end of a deep socket. The socket will compress the spring and the plastic will push the retainers on. A little grease on the keepers will keep them from falling off while you set up the socket with plastic. Maybe this will help someone. Doublewide6 is one of the smartest mechanics I have seen on RU-vid. Thanks for all of the great information tips and tricks.

@elgkas9928 Год назад

The left side plug shows signs of oil burning, not from running rich. The oil could have come from the broken valve stem seal. Those engines have hydraulic lifters and you are correct, there is no adjustment. I would check compression on that side now that you reinstalled the valve spring. I have seen the lifters lose pressure from clogged ports which causes the lifter to collapse, leaving the push rod loose. Most often happens on Kohlers that do not have regular oil changes. This sudden loss of hydraulic adjustment can cause the valve keepers to suddenly loosen and allow the valve spring to fall.

@Lovinflyindrones2022 9 месяцев назад

I thought my mind was playing tricks on me. It went from a zero turn to tiller. I thought I hit the screen and switched videos but played it back and realized I didn’t. Thanks for the Bonus tiller video repair. Doublewide6 Rocks😅😅😅

@kyledockins5801 7 дней назад

Same I was like questioning what happened

@kyledockins5801 7 дней назад

That part u piled on the wire to retighten and that piece flew out was great 😂

@Andy-nm9dw Год назад

Tiller bonus section included.

@robertbiggs4934 Год назад

Doublewide...I really love the practical way you go about diagnosing and fixing things. Seems you normally throw in some nice "tricks of the trade" also. Thanks for sharing! Great content!

@repairrestoreresell2026 Год назад

Happy New Year!! Put compressed air in the Cylinder to hold the valves closed. Drill a hole in the handle of the collet wrench for your angle grinder. pass a bolt through the hole you drilled into the rocker pivot, or valve cover bolt hole which ever lays out best for your application. Now you have a secure valve staying put and a levered fork to compress the spring. They make a store bought tool for this, but I was in a hurry and said to myself "Self, that tool looks a awful lot like my collet wrench with a extra hole" It worked great and didn't need to wait for UPS to finish the job and get paid. Best of Luck.................

@Turningwrenches85 Год назад

Love your diagnostic work as always for your repairs, good work there fixing the valve on this kohler engine.

@KensSmallEngineRepair Год назад

Bob the minute I saw that Torch spark plug on the tiller I said Nooooo! I always replace them as sometimes they Spark fine in atmospheric pressure out of the engine but won’t light consistently under compression. Just my experience with them!

@Big_Johns Год назад

Bob if you'd have got the spring and keepers back on with just your thumbs I would've been very impressed and in awe. The audible "click" from your torque wrench was amazing, I need to get one like that. 🤣

@randynelson1769 Год назад

Air pressure works, but I've used rope stuffed into the spark plug hole. Rotate the engine by hand to compression and it holds the valve closed. Install the spring and keepers. Pull the rope out and you're done.

@crisprtalk6963 Год назад

Looking forward to the follow up.

@themowerman Год назад

Good job on the valve spring.. so hopefully just a carb clean and it should be good ..

@vernonbruce3722 Год назад

looking forward to the follow up videos on this machine.

@mikespain8655 Год назад

A little grease on the valve spring keepers to hold them in place, and a valve spring compressor sure makes the job easier.

@vernonbruce3722 Год назад

that was a headache. good solution though on the retainer installation. If you had an adapter to attach an air hose into the spark plug hole, maybe that would hold the valve in place. maybe adapting a leak down tester.

@kpdvw Год назад

put compressed air into the spark plug hole with an air hose adapter to keep the valve CLOSED during spring and keepers install!

@kpdvw Год назад

Valves NOT adjustable? Are there hydraulic lifters inside the motor?

@donaldelrod9172 Год назад

did you have the piston at tdc to keep the valve from escaping? looks like you need a third hand to hold the valve closed. stuffing the cylinder with rope or cord through the spark plug hole to keep the valve closed.

@philliphall5198 Год назад

Plug is black, I would replace it for sure, good luck 👍

@kenhilson786 Год назад

I've read some kohlers have hydraulic valve lifters.

@jimmybritt9537 Год назад

I think you can spin the piston to hold the valve up ?

@guyina4x499 Год назад

Put piston to bottom, stuff rope into cylinder thru plug hole, turn engine by hand to compress rope to hold valve closed. Install spring. And yes command engines have hydraulic lifters.

@kenhilson786 Год назад

I try to spray continuously for a bit after it fires up.

@philliphall5198 Год назад

Starter going to get hot, it needs a lot of touch up and cleaning