KRX 1000 - mounting new tires on your beadlocks

Подписаться 4,7 тыс.

Просмотров 12 тыс.

50% 1

Sorry it's so long! The biggest issue we see are people incorrectly mounting their beadlocks and dealing with leaks...so we wanted to cover as much as we could!
These are KRX torque values, so make sure to check your manufacturer for the right ones if you aren't wrenching on a krx
our site for weights/belts/etc
www.rightcoastoffroad.com

Опубликовано:

30 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 19

@boblaws9851 3 года назад

A couple of tips to add. Soapy water works as well for lubing the bead to put the tire on the rim, and then again when you are ready to air up and seat the bead. Also, set the bare rim on a 5 gallon bucket to install the tire, and when airing it up. If you have ever seen a tire blow off of a rim, you would never even think about straddling it to put pressure on the rim to seat the bead. If you set it on a bucket, the weight of the tire will seal it evenly to start taking air.

@rightcoastoffroad 3 года назад

I have seen tires blow off of beads, its scary! We never went over 20 psi seating these beads, so I wasn't too concerned.

@martinwalkowe9298 Год назад

I wish that I saw this video before I paid $30 to mount one tire!

@rightcoastoffroad Год назад

I know a guy Mr Walkowe! 🤣

@peterkueffner747 3 года назад

Good info. I learned the hard way on my factory CanAm beadlocks that if you don't follow what you showed, the rings can crack. Those are my dream tires, please do a complete review on them. Looking forward to the tender springs. Btw, your links are not clickable.

@rightcoastoffroad 3 года назад

Will do on a full review! And thanks for the heads up on the links!

@OdysseyOffroad 3 года назад

Hey i noticed you have the factory springs on. Did you take off the bandits?

@rightcoastoffroad 3 года назад

We have factory lowers and our prototype tender springs. The bandits are great! But we also wanted to try out a tender spring only kit and offer that for people who don't want to spend the money on a full spring kit.

@donniecohrt3655 Год назад

Where did you get the tires from. Didn’t see it in description…

@Boingdande 3 года назад

Great vid. Should have watched this before asking dumb questions today.

@SpeeeedyG 3 года назад

How did you remove the tire? The video starts with the bare rim.

@rightcoastoffroad 3 года назад

Unbolt bead lock ring, then use a tire machine on the other side. They have cheap hand operated ones at harbor freight for like 40 bucks.

@shannonstiles8751 2 года назад

🇺🇸

@easye0212 3 года назад

So I just got my new km3 tires to go on the factory krx beedlocks... Bolts seem to short or tire to thick.... Either way what's the fix?

@rightcoastoffroad 3 года назад

You can grab longer bolts. Dkd you get the truck version or the utv version?

@peadookie 3 года назад

Curious on this as well, as I'm considering the KM3s

@Th3Pnsh3r 3 года назад

Any updates on the km3 ? Strongly considering the tire too

@CarbonCountyBuilds406 Год назад

@@peadookie I just got done doing the truck km3 and all you need to do is the same thing he is but get 1/4 inch longer hardware from Tacoma screw it was 71 dollars for all 64 of them

@peadookie Год назад

@@CarbonCountyBuilds406 nice man, I appreciate the follow up and info! How you like the tires?