No video :(

KST Kustoms Mayhem Bagger Handlebar Install On A Harley Davidson

Подписаться 3,2 тыс.

Просмотров 19 тыс.

50% 1

KST Kustoms Mayhem Bagger Handlebar Install On A Harley Davidson. It's winter and time for another install. In this video I will be ditching the stock handlebars for some KST Kustoms 10" Mayhem Bagger Handlerbars. It's been a long time coming but now they are finally installed. I'll take you through the steps I took to get all the wiring out of the stock bars and into the new ones. This is a lengthy video but it is also a lengthy process to make sure it is done right. #handlebars
#harleydavidson #howto #sinisterclutch
KST Kustoms Mayhem Bagger Handlerbars
www.kstkustoms...
Wire Extension Harness
www.kstkustoms...
Mirror Hole Plugs
www.kstkustoms...
H-D Polyurethane Handlebar Riser Bushings
www.harley-dav...
Instagram - / sinisterclutch
Videezy.com
Racing Sport Gaming | RACING by Alex-Productions | / @alexproductionsnocopy...
Music promoted by www.free-stock...
Creative Commons Attribution 3.0 Unported License
creativecommon...
Lucid Dreaming by | e s c p | escp-music.ban...
Music promoted by www.free-stock...
Attribution 4.0 International (CC BY 4.0)
creativecommon...
Send Mail
SinisterClutch
P.O. Box 311
Walton, KY 41094
DISCLAIMER:
Under no circumstances will SinisterClutch be responsible or liable in any way for any content, including but not limited to, any errors or omissions in the content, or for any loss or damage of any kind incurred as a result of any content communicated in this video, whether by SinisterClutch or a third party. In no event shall SinisterClutch be liable for any special, indirect or consequential damages or any damages whatsoever resulting from loss of use, data or profits arising out of or in connection with the availability, use or performance of any information communicated in this video. Due to factors beyond the control of SinisterClutch, it cannot guarantee against improper use or unauthorized modifications of this information. SinisterClutch assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. SinisterClutch recommends safe practices when performing any mindfulness, physical, or financial activities seen or implied in this video. Due to factors beyond the control of SinisterClutch, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of information contained in this video is the sole responsibility of the user and not SinisterClutch.

Опубликовано:

28 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 116

@javier9702 Год назад

Good evening sir my name is Xavier just wanted to drop a note. I think your video is one of the best out there in RU-vid land. Just can’t believe you don’t have enough following with this great information procedure on the bike and handle installation but kudos to you. I’m sure whoever sees your video appreciates everything you’ve done for us that are learning thanks again brother from apopka Florida. If you’re ever in Florida look us up Sons of combat vmc ..very small group dedicated X airborne ranger soldier

@SinisterClutch Год назад

Thank you so much for watching and commenting. I appreciate the kind words and means a lot. I hope the video helps someone that is thinking of doing a handlebar install. I really enjoy doing install videos but there is only so many things I can install on my bike. Maybe I need a second bike ha. I was actually in Florida last year in Port Charlotte for a World Record Poker Run. Take care brother and enjoy the ride✌🤙👊💯

@bobmorrone6014 3 месяца назад

In my opinion this is by far the best instructional video I have seen. I'm definitely going to do my own now because of this video. Thank you.

@SinisterClutch 3 месяца назад

Thank you sir! Appreciate you watching and let me know if you have any questions. Take care and enjoy the ride✌️🤙

@KrakensGarageandAdventures 2 года назад

Absolutely love my Milwaukee M12 ratchet. Shimmying the lever to not snap off the tab on the clutch and brake levers is really an annoying design. Its snapped on me a few times over the years. I'm seriously thing of installing the nostalgic heated grips on the revival. (commenting as I'm watching) I know how many hours it took to do this task and this video is gold for someone wanting to tray and save some serious coin. Out freak'n standing video Randy. Eric

@SinisterClutch 2 года назад

Thank You Eric! It is a long process but I do enjoy working on my bike and I can tell you do too. I always say if I can help one person it’s worth it. Heated grips would be a nice addition. The more comfort the better. Appreciate all the support. Take care💯👊🤘

@ChopperFett 2 года назад

Wow man this was incredibly awesome walkthrough. Internal wiring is no joke either. Great work!!!

@SinisterClutch 2 года назад

Yeah I kept thinking…”I hope all this electrical works after I’m done”🤣😂. I enjoy working on my bike so that helps a lot. Thanks for watching 💪👊💯

@GlidingOnTwos 2 года назад

Superb video install Randy. You made that look real easy. Better late than never on catching the bars being bent. Glad KST resolved that for you. 👍🏾

@SinisterClutch 2 года назад

Yeah they took care of me and quick to respond. Appreciate you watching 👊💯💪

@patrickhollis5332 4 месяца назад

Yea they all look easy they just cut out the throwing fits and things LOL my problem is patience with wiring I’d rather take a beating

@TheBlueBikeDoyle 2 года назад

I got to get my bar put on mine . KST Custom is just down road from me . Good people 👍

@SinisterClutch 2 года назад

Yeah they were great to work with. Very helpful

@RobertS81658 4 месяца назад

Nice video. Thanks for sharing.

@SinisterClutch 4 месяца назад

Appreciate you watching 🤙👍

@HDVIBE 2 года назад

Good stuff Randy. I'll be watching this in full later today. I'm very interested in learning how to do a bar change. Thanks for sharing. Ride safe. 👊👍🇺🇸

@SinisterClutch 2 года назад

Thanks Rick. If you have any questions let me know. Appreciate you watching 👊🤘

@RidingHumboldtCounty 2 года назад

Oh nice install Randy! I’m a big fan of the bagger bars.

@SinisterClutch 2 года назад

Thank You! Appreciate all the support 🤙

@larry68hd11 2 года назад

Nice job on the install. Thats the bars i had on my 2017 and going to put on my 2021 Street Glide.

@SinisterClutch 2 года назад

I love them so far. Looking forward to some long distance riding as soon as all this bad weather goes away. Stay well and enjoy the ride 🤙👊💯

@TheMilitaryBiker 2 года назад

Absolutely fantastic "how to" video mate, top job. Bars look great man!

@SinisterClutch 2 года назад

Thanks so much! I just need some more time to crush some miles. Stay warm and safe bro🤙

@HarleyGurl114 2 года назад

Harley Gurl Wow!! Another great install as always. Very detailed and although I know it is not easy to do, especially the threading of the cables/wires inside the bars, you make it look easy. Patience....you show that you have that. GOOD stuff Great install!! Bummer about the bent bars! Good that they replaced them for you. Those bars look awesome!!!

@SinisterClutch 2 года назад

Yeah KST has great customer service. It definitely took a lot of patience to do the install and filming it too. Thank You🤙

@tennwingman3350 2 года назад

Good job Bro! Thanks for the video and sharing with us. Be safe, have fun.

@SinisterClutch 2 года назад

Thank You! Hope you and you’re family are doing well. Take care✌️

@HarleyDayRider 2 года назад

Very good video on installing bars. Sucks you had to do it twice! Glad they hooked you up. Ride Safe

@SinisterClutch 2 года назад

Yeah great customer service! Now just need to get some better weather to crush some miles

@OZARKSHDRIDERS 2 года назад

Great job on the install brother, I like the way that you walked through this one, it will definitely be a video that will help out anyone that is thinking of changing out there bar's, and big kudos to KST for taking care of you on the bent bar's, again, awesome install brother💯👊🏽😎

@SinisterClutch 2 года назад

Yeah I definitely got good experience changing handlebars🤣. Now I just need to do some riding.

@OZARKSHDRIDERS 2 года назад

@@SinisterClutch I agree with that brother💯

@RidingHumboldtCounty 2 года назад

Sinister clutch 👊✊👍💯

@SinisterClutch 2 года назад

Thanks bro🤘🤘

@MRGS48 2 года назад

I tell you what. RU-vid is getting expensive!!🤣🤣🤣🤣 My Benjamin tree dried out in the back dang it!!🤣🤣 Good stuff brother

@SinisterClutch 2 года назад

I know you watch a video and think I need that 😂🤣. Take my money 🤣

@MRGS48 2 года назад

@@SinisterClutch 🤣🤣🤣 You know it!!!

@TheBadgers 2 года назад

Great video you made it look easy. Sucks you have to do it twice, but at least they sent you a new one.

@SinisterClutch 2 года назад

Yeah I feel pretty qualified as a handlebar installer 🤣😂

@GoofyBastard 2 года назад

You did a great job on those bars!!! Man that was definitely a labor intensive job. I’m sure glad mine weren’t like that. They’re looking good brother!!!

@SinisterClutch 2 года назад

Appreciate it! Yeah if I didn’t film it then it wouldn’t have taken so long 😂🤣. Patience is key.

@TweedleD 2 года назад

Look at you Big baller with power tools and no cussing. Lol great video you just forced me to do my own install when I get cruise control on my breakout.

@SinisterClutch 2 года назад

I love working on the bike. You ride it you wrench it. That’s how we learn right. You definitely need cruise control. I can’t go back to a bike without it. Take care bro👊🤙

@WeRideWV 2 года назад

Awesome install. As far as garage install, bars can be the most challenging to do. Great job brother 🤘

@SinisterClutch 2 года назад

Thanks Adam and yes it is. Even more so when you are filming it 🤣😂

@JoneszsRides 2 года назад

Great install Randy. Man you going through all that made it look easy. 🤣 I wouldn’t even attempt it. Again great stuff👍🏻🇺🇸

@SinisterClutch 2 года назад

Greatly appreciated Scott. It definitely takes time and patience. But I saved a lot of money and it’s nice to know how everything works. I enjoyed the process. 🤙✌️💯

@FlipandTheBlueMule 2 года назад

Great job on this one

@SinisterClutch 2 года назад

Appreciate it. Thanks for watching 🤘👊💯

@MrAyarza Год назад

Nice and very clear information. Thanks for sharing

@SinisterClutch Год назад

Thanks for watching and hope it helps. Take care✌️

@IndiansAuto 2 года назад

I love how easy this was for you lol. I lost my shit doing this job!!! I didn’t buy extensions, i cut and soldered the same gauge. Wire in between.

@SinisterClutch 2 года назад

Oh I cussed multiple times 😂😂. Definitely save money soldering. I saw where someone rerouted the wires for the switches to make it work. Appreciate the feedback 🤙

@IndiansAuto 2 года назад

@@SinisterClutch guys at KST made it look so easy lol.

@SinisterClutch 2 года назад

@@IndiansAuto If I can do it anyone can 😂🤣😂

@CDLNEPA 2 года назад

People wonder why these jobs cost so much when you have the dealer do them. Alot of work, but very satisfying to do it yourself

@SinisterClutch 2 года назад

Yes it is and I save a good amount of money doing it myself. Plus you learn a little more about your bike.

@ericroadking7564 2 года назад

excellent job brother!! Thanks for sharing!!

@SinisterClutch 2 года назад

Appreciate you watching 🤙. Take care✌️

@powamoto 2 года назад

Vid so well done, details and impressive knowledge and a great teacher. So I brought all these thumbs ups for you too👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼👍🏼💯😎💫

@SinisterClutch 2 года назад

Appreciate it bro! Thanks for all the support.

@powamoto 2 года назад

@@SinisterClutch support for the motorcycle RU-vid community 1st priority

@larrypontelandolfo9304 2 года назад

Well done on the video. Enjoy..

@SinisterClutch 2 года назад

Thanks Larry! Appreciate you watching ✌️

@MRGS48 2 года назад

As I am fighting the idea of changing the looks of my RKS I sat on a heritage-after the Harley Faster Further event at my local dealer- with I believe 14’ bars and loved how they felt on my broken by Uncle Sam back lol. Question is did you get longer lines or not? Thank great share bud!

@SinisterClutch 2 года назад

No you won’t need longer clutch and brake cables unless you go above 12”. I just removed the zip ties to get slack in the cables. Also the clutch cable is pushed to the right of the bike so I moved it to the left and had plenty of length.

@marco-tiopet4020 2 года назад

😍🤩👍✌

@SinisterClutch 2 года назад

Marco Thank You so much🤙✌️

@TylerSmith681 Год назад

Hi I loved the video. Was just wondering how tall you were? I'm about 5foot 7inches tall and was looking to change out my bars and I got told to go with 12in kst but think they are to tall for me. Also how do you like th 10in bars? Are they comfortable on long rides?

@SinisterClutch Год назад

Thanks for watching and commenting. I’m 5’10” and love the handlebars. Since installing them I’ve put over 10K miles on the bike and they are very comfortable. I feel more relaxed on long rides and wished I’d installed them sooner. I thought about 12” handlebars but I ride in cold weather and wanted to keep my hands behind the fairing as much as possible. If I remember correctly they are more like 10 3/4”. Hope this helps 🤙

@TylerSmith681 Год назад

@@SinisterClutch Thank you very much!! This helps a lot. I ride in cold weather too being up here in central New York. So keeping warm is always important when its below freezing.

@rogerfletcher4206 Год назад

Hey there. Great video. I refuse to pay the dealer a couple grand to do this. What kind of time commitment am I in for? 32:31

@SinisterClutch Год назад

I think 4 hours is sufficient. It took me longer because I filmed it. Just lay everything you need out and it will go faster. The wiring for the new bars is the most time consuming part because you don’t want to bind or snap anything. Appreciate you watching and commenting. Let me know if you have questions. Take care✌️

@rollinstone1969 2 года назад

Look good I videoed my install but it was taking to dam long to do, so I scraped that. How do they feel? I put the wild one chubbies on mine but I might change them

@SinisterClutch 2 года назад

So far I like them but I need more riding. Too much bad weather anymore. I had a lot of video I cut out. Editing took a long time too. Take care brother 🤙

@HDMann292 2 года назад

great vid, do you think if ya would of went 14" the fairing mirrors could of stayed and you would be able to see using them?

@SinisterClutch 2 года назад

Yes I’m 100% sure they can stay with 14” bars. I’ve seen Street Glides with 14” bars and kept them.

@DerrickRollins-rh4xw Год назад

Did you say that 12 inch would have worked also with factory cables and lines?

@SinisterClutch Год назад

Yes you don’t need extended cables for brake and clutch cables. You do need extensions for the switch housing wiring harness.

@joehengels5409 Год назад

Great video. Using the same setup as you. Question is does the turn signal wires come out off the housing and then go into the bars?

@joehengels5409 Год назад

@@SinisterClutch hey brother. Your video is the only one I have seen that leads me to believe this. I have been struggling to get the wires to stay inside of the housing. Any chance you could send me a pic of how they rout out of the housing. I’d really appreciate it

@SinisterClutch Год назад

@@joehengels5409 Let me explain this in detail. So by factory the Switch Housing for the turn signals wiring harness is on the outside of the bars as you can see at 8:20 in the video on the left and 10:00 on the right. At 19:25 I start to show that I'm installing the right switch housing inside the new KST Bars by taping it to the paracord attached to the braided steel wire.

@joehengels5409 Год назад

Again, great video. Got the bars on and controls mounted. I noticed the heated grips are the same as the ones I bought. Can I ask how you wired them in? Thanks again for your help

@SinisterClutch Год назад

@@joehengels5409 So the heated grips came with a 10” extension wire for the left side that you definitely need. The right side already has the wire ran from factory which is part of the throttle by wire. For my particular heated grips I had to connect a wire harness to the battery so I took the tank off and ran the wire alone the frame. Also I’m a fan of soldering so that was my choice of how to connect the wires. Sorry I don’t have a video on that because I wasn’t on RU-vid when I originally installed them. Hope this helps

@joehengels5409 Год назад

@@SinisterClutch hey no problem. Yes I looked and didn’t see one. I’d like to pick your brain if I could. I have the red with a fuse goes to battery. A black which is ground and a orange/ white to accessory power. Thanks again

@klchristian1522 Год назад

How long did the installation take

@SinisterClutch Год назад

It took me 8 hours because I filmed everything and made sure it all looked good. I would say 4 hours with no filming.

@michaeltourtillott8512 2 года назад

can you use the stock riser bushing bolts or do you need longer ones when changing bushings cuz my bushings didn't come with new bolts

@SinisterClutch 2 года назад

You can use the stock bolts. Mine was a kit so came with new ones. They are the same length. Hope that helps🤙🤙

@michaeltourtillott8512 2 года назад

Awesome thanks man, I didn't want to start taking everything apart just to find out I need different bolts. Definitely be using this video to walk me through it cuz you did a great job explaining everything. Thanks again, time to get these bushings and bars on.

@SinisterClutch 2 года назад

@@michaeltourtillott8512 Awesome glad I could help🤘🤘

@RidingHumboldtCounty 2 года назад

Unfortunately I had to pay someone to install mine lol 😂

@SinisterClutch 2 года назад

Yeah I looked into it and was like I think I can do it and save money 🤣😂

@KOJAKLAKWATSERO 2 года назад

oooo dbaaaa....nice vlog...very informative paps....love your cool bike....keep enjoying life....im all set on you paps and hope you can visit my humble garage too

@SinisterClutch 2 года назад

Appreciate you watching! Take care ✌️

@TobyNorthEN 2 года назад

Randy, what brand of polyurethane bushings did you get?

@SinisterClutch 2 года назад

Harley-Davidson. I’ll put a link in the description.

@TobyNorthEN 2 года назад

@@SinisterClutch Thanks! I am looking to do a video for my Road Glide but I don't know that I'll match the standard, patience, and expertise you demonstrate! Great job Brother!

@SinisterClutch 2 года назад

@@TobyNorthEN Appreciate it and yes you need patience because filming it makes it take way longer

@TobyNorthEN 2 года назад

@@SinisterClutch Yessir it definitely makes a routine project become a (triple the time) major undertaking.

@TobyNorthEN 2 года назад

@@SinisterClutch 32:30 minute video...how long did the entire project take you?