No video :(

Kubota BX2380 Oil Change - 50hr Service

Подписаться 2 тыс.

Просмотров 37 тыс.

50% 1

In this video I show you how I took care of the oil change part of the 50 hour service for my Kubota BX2380. It just included changing the oil and filter for the tractor. If you are interested in seeing the rest of the 50hr service where I service the Hydrostatic transmission please feel free to click this link.
Kubota BX2380 Transmission Fluid Change - 50hr Service
• Kubota BX2380 Transmis...
This Kubota was easy to do maintenance on all I had to do was get the proper supplies and then I was set to move forward. You can get the oil and filter from your local dealer which may be the best place to get it or you could try and order it from the internet I could not find anywhere on the internet that was cheaper than my local dealer. That may be different for you.
My list of Supplies:
Kubota Oil, 15w-40, 3.5 quarts
Kubota Oil Filter, Part Number (HH150-32430)
Oil Drain Pan (big enough to hold 3.5 quarts)
Funnel
Oil Filter Wrench
Shop Towels
Ratchet and Socket or Wrench for Drain Plug
Subscribe to see more videos!
Give the Video a Thumbs up if you liked it!
Thanks for Watching!

Опубликовано:

22 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 30

@thelanterns 8 месяцев назад

I have a BX2380, bought in May 2022. I change the engine oil and filter every spring and fall. I also only use synthetic oil, especially during the winter months. It flows better and faster in the cold. I only have about 50 hours also. And my first oil filter replacement was also very tough. I tries 4 different oil filter wrench's before I got it. They defiantly put them on way too tight at the factory. I wonder why the dealers aren't telling them this.

@nitrit07 Год назад

I just did my first 50 hours engine oil change, thank you for your video, very appreciated.

@scottwalker19 Год назад

Glad it helped

@mrglock2313 4 года назад

The arm chair guy here. I think the oil plug is a #14MM. Just my 2 cents

@user-hb8be5wb4q 5 лет назад

Good video, thanks for sharing! Just one point, that’s way more torque on the oil filter, next time that will be a real bear to get off. Personal experience!

@scottwalker19 5 лет назад

I did not tighten the filter that tight when I installed the new one.

@martyb3783 3 года назад

Thanks for a nice video. Very helpful.

@scottwalker19 2 года назад

Thank you for the kind words!

@gonzo49868 4 года назад

This is great! Thank you for making this Scott!

@scottwalker19 4 года назад

Thank you!

@lindariess1008 5 лет назад

Awesome video.

@scottwalker19 5 лет назад

Thanks!

@Mike-rj5bx 5 лет назад

Nice video..thanks!

@AquaZulu8947 3 года назад

You should change both fuel filters after 50+hrs

@flyingbob297 5 лет назад

All ways put lube on your rubber

@flyingbob297 5 лет назад

Nice job

@Bruceschoice 3 года назад

why do you change tran oil, it calls to change at 200 hours.

@scottwalker19 2 года назад

It was suggested to change the Filter and it seemed beneficial to me to just go ahead and change the trans oil and clean the other screen at the same time since the whole purpose of changing the filter so soon was to help remove the metal contaminates that come from a brand new machine.

@wildbill23c 2 года назад

Initial service is at 50 hours, as well as the filter, and the screen. Then 200 hours after that. I'm doing the front axle oil as well at my 50 hour service....lots of gunk in the fluids during the break in period that you want to get out of there ASAP.

@user-hb8be5wb4q 5 лет назад

If you can hand tighten the filter, don’t farmer crank it down, just snug tight is great for the filter. I have had filters that required a screwdriver thru them to untighten, some the filter was so tight, the oil filter fitting came out of the engine block. Too much is too much! The teenage technicians down at the rapid, zipped, jiffy lube don’t have the knowledge to tell if too much is too much tightness. Nuff said.

@scottwalker19 5 лет назад

Yep! I do think that when the factory put these tractor filters on the did not lubricate the o-rings. They squeaked the entire time i was unscrewing them until the oil hit the seal.

@yogeshvaidya8526 5 лет назад

कुबोटो की हायड्रोलिक सिस्टम के बारे मे बताये

@michaelbrewer1474 5 лет назад

Do you find that you use the BX more or less than what you thought? We have about a acre and a half mostly woods. I was trying to decide how much we would actually use it! Thank you for the video

@scottwalker19 5 лет назад

I use it more than I thought. It depends on what you plan to do around your property. I have about 3.5 acres and so just using it as a wheelbarrow is a real time saver and energy saver. If you do a lot of projects around the house your self then this tractor can be very handy especially if you get the quick attach bucket. I have the bucket, forks and a grapple and interchanging them is a breeze allowing me to do multiple things a day without the hassle of pins and other stuff. I will be putting more videos out about the attachments that I have and my thoughts. Let me know if you have any other questions!

@robertjames-life4768 4 года назад

I’m at about 55 on mine. Love it, use it more than I thought. Thanks for the video.

@kevlarshanahan1087 2 года назад

I have 3/4 of an acre and with the skid steer pallet forks on the front I use it for all kinds of things.

@kellywright-simpson9025 2 года назад

My BX has two oil knobs one on top and another the side. Are they for the same oil?

@wildbill23c 2 года назад

Same...I have the BX2680, mine is that way, the top one is a pain to get to, so I would use the one on the side as its much easier to access. Coming up on my 50 hour service...I'll be doing the engine oil/filter, and hydrostatic fluid and filter, as well as the front axle oil.