kyosho mini z ma030 awd evo stock vs drift spec review of front one way diff and solid rear axle 

It's my favorite bit to film and edit. 👍🏽 Thanks

Thanks again.

Thanks 👍🏽

Thanks

Great tip. OK will test it. I tried messing settings with ics and top speed. I think it depends on what pinion as to how much effect it has. Will try that next. 👍🏽

what part/s mods needsd for limited slip. i see kyosho has a rigid rear axle for the awd-mdw024. would this and the one way be good for drift racing?

@@ChipPuccio The ball differentials are the limited slip diffs of the Mini Z world :P

yes gyro at 40 percent tyres were mini z wide rear narrow front . The tyres were not standard on this model .

Cheers. It's great fun doing these vids. My sub count is going up, I'm back to work next week and I'm trying to keep momentum going with the chanel. Thanks for the support 👍🏽

Most drift tyres work . Preferably slippier ones .lf5 ds racing are good .

I'm setting up a website to do just that.... Great minds 😊it's jist taking longer than planned!

Cheers

They never went away 😉more coming soon

The standard diffs are very good. Open front and rear. Choice of tyres can have more effect on the handling. Let me find my set ups. I use different treads and hardness front to rear. Ball diffs enable yo u to adjust the slip. So slightly tighter o ntje rear gives more power out of a corner etc....

@@GarageMiniRCUK Yes, I have two cars, both stock (I race with my son). His, seems to handle like its on rails with the race setup (20 shore tires all around, on hard tile). FAST! My car, same everything, even same body, seems to loose the back end on left turns. Spent ALL DAY yesterday tearing it down looking for binding. Nothing.. I swapped over the diffs from his to mine, and seems to fix it. So, decided to just replace stock diffs. So, the goal is to have fast speed, high grip, and not loose the back end on decell / braking. Let me know what you think may accomplish that.

Springs make a difference too. Softer /harder. I'll have a play with my ma020. Use tyre tape too.

You mean the front one way?

They look the same I haven't tried them on the Ma020. I will check. 👍🏽

That's Great! Thank you! I became your fan 🤗👍✨

Yes I have used Ma020 arms on ma030 awd evo.

I went pretty soft on the front and medium at the back. Loved the power from locked rear. Great noise from the evo. Thanks budd

BMR 3 I was thinking that. I don’t run any camber on the rear for 50/50 or even cs drift. I want a flat contact patch.

BMR 3 Also ur videos are great ! enjoyed watching both of u guys channels

thanks for watching

this was a new set up for me . I normally go flat . some of my cars like the sz only work well with flat contact at rear .

I got it from Eagle racing I think a while ago. Or could even have been miracle mart a few years back

Both kyosho. I'll have it have a look for number.

Maybe, I'll have look at the spec, it's awd, does it have good steering angle?

@@GarageMiniRCUK i would say it's not worse than a ma03f. Maybe i lack the skillz.

I'm hoping to get a mini z buggy. So might be able to help with a few videos. I'm away at the moment once I get back ill start a mini project. I know some versions can have a gyro added which does help.

@@GarageMiniRCUK If you do, get the brushless one right off the bat, provided you have the radio for it, which I think you do since you have so many zs :). I did install the gyro but it broke... Be gentle with it. The gyro placement on the buggy is not the best as it sits on top of the motor and the wires are stretched and exposed. After re-soldering the wires twice, the connector tore off the board...

Thanks for that, I have been looking at the brushless one. Yup, I have the controller already 👍

Yes it can. Wide rear wishbones and cvd come with evo dws.

@@GarageMiniRCUK so they only come with the evo version? Thank you

You can get them as a kit from miracle mart too with their version of dws (double wishbone rear suspension kit) or you can buy a dws kyosho kit but it's like triple the price.

Yes it does

Sweet thanks yo

Hard plastic ds racing drift tyres. I have the in lf1 through to LF5. Depending on surface

@@GarageMiniRCUK Where do you buy your tires? Everywhere I look, the DS Racing tires are either sold out or they have something I have not heard of or seen anyone else mention.

@Peter Walker I have lots in stock I'm just updating the website. garagerc.net/product/ds-racing-wheels-lf3/.

@@pekwalker sorry, I get mine from the manufacturer.