This is large bag that can fit up to 15" laptop.
Continue reading below for the list of supplies and cutting instructions; you may also download the PDF version here : bit.ly/3dbqOXA
Fabric Requirements
(based on 44” wide cotton quilting fabric)
Fabric A : 1/4 yard
Fabric B : 1/3 Yard
Fabric C : 1/2 yard
Fabric D : 1 5/8 yard
Interfacing & Stabilizer
Sew-in Foam Stabilizer : 15.5” x 45.5” amzn.to/37AzrK8
Fusible Fleece : 15.5” x 42” amzn.to/2YDAHIx
Fusible woven interfacing : 2 yards (20” wide) amzn.to/2N70seE
Hardwares, Strap, Zipper
1.5” D Rings (2x) amzn.to/3d2Pwt7
1.5” Swivel Hooks (2x) amzn.to/3hAFNxG
1.5” Adjustable strap slider amzn.to/2AKd0Gi
1.5” wide webbing strap 1 2/3 yard amzn.to/30LLbbg
9” long zipper (1” wide) for the front pocket amzn.to/2UPvDQi
17” long zipper (1” wide) for the zipper pocket divider amzn.to/30KnW1r
18” long zipper (purse size) for the closure amzn.to/3d874Em
Additional supplies and tools
Basting Tape amzn.to/2UPrBaB
Polyester Thread
Walking Foot
Heavy duty (denim size) needle - for final top stitching amzn.to/3fzLdaB
Hera Marker (optional)
Cutting
~Front Zipper Pocket (Panel 1)~
Upper panel :
From Fabric A : 8.5” x 5” (cut 1x)
From Fusible woven interfacing : 8.5” x 5” (cut 1x)
Lower panel :
From Fabric A : 8.5” x 8.5” (cut 1x)
From Fusible woven interfacing : 8.5” x 8.5” (cut 1x)
~Panel 2,3~
From Fabric B : 4.5“ x 13.5” (cut 2x)
From Fusible woven interfacing : 4.5” x 13.5” (cut 2x)
~Panel 4,5,6~
Panel 4
From fabric A : 8.5” x 13.5“ (cut 1x)
Panel 5&6
From fabric B : 4.5” x 13.5” (cut 2x)
From Fusible woven interfacing : 16.5” x 13.5” (cut 1x)
~Stabilizer and additional interfacing for the front and back exterior fabric~
From the Foam Stabilizer :
15.5”x 12.5” (cut 2x)
Fusible woven interfacing
16.5” x 13.5” (cut 2x)
~Gusset~
Side Gusset
From Fabric C : 5” x 13.5” (cut 2x)
From Fusible Woven Interfacing : 5“ x 13.5” (cut 2x)
From Foam Stabilizer : 4” x 12.5” (cut 2x)
Bottom Gusset
From Fabric B : 5” x 16.5“ (cut 1x)
From Fusible Woven Interfacing : 5” x 16.5“ (cut 1x)
From Foam Stabilizer : 4” x 15.5” (cut 1x)
~Handles~
From Fabric C : 42” x 4” (cut 2x)
From Fusible Woven Interfacing : 42” x 2” (cut 2x)
Tips : Cut the FWI in shorter pieces instead of one long piece.
~Zipper Closure ~
From Fabric C : 17.5” x 5“ (cut 2x)
Zipper Tab
: From Fabric C : 3” x 2.5” (cut 1x)
~Front and back lining~
From Fabric D : 16.5” x 13.5” (cut 2x)
From Fusible Fleece : 15.5” x 12” (cut 2x)
~Pocket 1 (zipper pocket divider)~
From Fabric D : 16.5” x 10” (cut 4x)
From Fusible Fleece : 15.5” x 9” (cut 2x)
Zipper Tabs
From Fabric D : 3” x 2” (cut 2x)
~Pocket 2 (Slip pockets) for the front lining piece~
From Fabric D : 16.5” x 8” (cut 2x)
~Pocket 3 (Padded pocket) for the back lining piece
~
From Fabric D : 16.5” x 19“ (cut 1x)
From Foam Stabilizer : 15” x 8.5” (cut 1x)
~Lining Gusset~
Side Gusset 1
From Fabric D : 2.5” x 13.5” (cut 2x)
Side Gusset 2
From Fabric D : 3.5“ x 13.5” (cut 2x)
Bottom Gusset 1
From Fabric D : 2.5“ x 16.5” (cut 1x)
Bottom Gusset 2
From Fabric D: 3.5” x 16.5” (cut 1x)
~Adjustable Strap~
From the webbing strap cut 55” long (or as desired)
Strap Anchors :
From the webbing strap cut 3” strips (2x)
**If you are more familiar with the metric system, I have put together a metric conversion guide for sewing that you may refer to in PDF format here : bit.ly/metricconversionguide
Visit my Amazon Store for recommended supplies, tools, and notions : www.amazon.com/shop/yoansewin...
Note : Some of the links above are affiliate links; I may earn commission when you make a purchase of qualifying items
through any of those links with no additional charge.
Find me on another platforms
Instagram : / yoansewingstudio
Facebook : / yoansewingstudio
Pinterest : / yoansewingstudio
Website : www.yoansewingstudio.com
Join my email list : eepurl.com/gQ_3wT
Thanks for watching and consider subscribing to this channel so you won't miss any upload
30 июл 2024