LAST PIECES TO THE AUDI RS3/VR6 PUZZLE HAVE ARRIVED!!!!! 

Guys I’m so impressed with what you’ve got coming together for the VR6 RS3, this project has totally changed the way that people will be looking at these types of cars and motors and nobody can fault you for persevering and getting it together. I loved the VR6 swapped A4 but this is just mind blowing 🤯

Best build on RU-vid by far! Just two guys in a garage, but doing big things!

This was one of my favorite updates so far. Thanks for sharing the information on the head studs, the clutch and transmission. I’ll be reaching out to Dima for an HD1400 clutch for my MK1 VW R32. Also I’m sure Ed is going to do an awesome job on the engineering side!

VR6 is getting more popular! keep building them! I just built a 11.5:1 .5mm overbore, balanced crank 3.2 24v (NA) so cool to see people engineering parts for these things!

I want to hear that vr6 doing a launch i can't wait

I can't wait to see/hear this thing go down a strip!

Amazing guys, those studs are some big boyz amazing stuff guys, screw the haters who told you this wouldn't work, well guess what it's working and it's just the beginnings.1000+ on the way.👍✌️👉

i test drove a stock RS3, and even then i can confirm, these transmissions are magic. it makes everything else look ancient.

This is epic 🔥🔥🔥 can’t wait to see the built motor come together

A twin turbo vr6 in an R8 would be pretty wild

Awesome content guys👍 I feel so excited about the whole project,this will be a total monster when is done. Keep up the good work MM!!!

Epic job guys! keep it up looking to seeing it done!👍👍👍

Congrats guys…love watching your videos! As a Stage 2 RS3 owner…I learn so much from your content.

That engine looks so sick & slick! Great job guys!

this build is the bollox...nice work fellas....

I just found time to watch!! Epic once more 😝

Nice work!!!! Congratulations!!!🔝🔝🔝🔝

The best channel ever 💖😀 Just waiting for that 3.6 vr6 you guys bought to make a build on 🙈

I may end up using your guy! I'm in PA and have a couple engines (1.8T and a 2.8 VR6) that may end up getting some work done! I can't wait to see the RS3 rip!

Guys…. You need to offer this as a service. My MK7 R needs a big turbo built VR6! 😁

As a RS3 Owner, Ive been subscribed for a long time 😎👍🏻

Yeahhhh!!!

George if you paint it hibiscus it will add easily 400 whp

Feta Power

Bad ass!! Can't wait to hear some wookie noises

You guys are cool keep up the good work 💯😎😎⭐️

Can’t wait to see this thing rip

Dammmmm Malaka about Time JK !!Cool Vid guys. Was up Stav you guys be safe 👊🏻👍🏻💪🏼…✌🏻out

The effect of radius is its square value.

🚀

I need an LOL MQB plate, haha. Great video guys! Edit: It seems even the gen 3 TSI engines have a 10 bolt flywheel, I wonder if this could be used for that as well, not that we may need it.

The two people who disliked this video are jaded 5cyl owners 🤣🤣

Double O-ring with piano wire on one side. What are you running for sleeves? Veicomer can port the 4v heads to run 450hp NA. NA power is the key to boosted power. It's so ridiculous that they allow idiots to post you don't need cams or porting when you are running a turbo. A untouched motor putting out 275hp na will need 45lbs to make 800hp. The built, awesome ported, big flow intake and header making 450hp will make 900hp at 15-17lbs boost. A VR32 should be able to make 1500hp done right. To do it without improving flow you would need 90-100lbs of boost with billet block and BME aluminum rods to hold the pressure. Modded 450hp motor is gonna do it around 55lbs because it's not resisting the air. Definitely need 450hp pre boost. 15-18lbs will double it to 900hp. 275 with 15-18lbs is 550. That's a 350hp difference with the same boost. Hair dryers are just doublers. Will never make more than bragging power to your bros without MAXING NA power. Every car you see winning drag classes is ported, cammed, sheet metal intake, high flow turbo headers, and then boosted.

4:00 whats that thing on the top right corner? love the channel by the way.

i do deskribe!!!

You guys are hilarious

Yall should just come back home east coast is where its at

you should turbo my Audi VR6 for me :)!

We need a 12v B5 update. Stav's been smashing the gym by the looks of it too 💪

George, Stav, do you guys know the distance from the DCT axle centerline to the front of the R32 off the top of your head? Why isn't anyone using the 07-09 R36 Phaeton, Touareg, Q7, Cayenne vr3.6 or the 10 Q7 and 10-17 VR6 3.6 Touareg? I must have seen 10 videos talking about a Passat unicorn 3.6 when it's been the only VR in production all the way to 2017. Parts availability are going to be way better for something 4 years old compared to 15 years old for the last R32 I think? 2010 and up are 305hp NA stock.

Stav (not sure how to spell it ) lol. He’s Losing weight!! Keep it up!!

Stav losing pounds huh. Slight faster 60foot now 😆🍾

LET THEM GET MAD

Have you thought about hood vents above the turbo to let some of that heat have a quick exit?

Im on the east coast please recommend a reputable machine shop please

Hey Stav, you’ve lost a tone of weight… looking good Malaya…

🤣🤣🤣 ❤️

vent the hood

Wire tuck ?… I’m starting to smell a shaved bay 👀

Are you guys looking to replicate this build once it's sorted for interested parties?

Μαλακα τι πόνο θα δώσει το εργαλείο !!ανυπομονώ να κάνει εκκίνηση !!!Γιωργαρα το εργαλείο είναι καυλα 🇬🇷😎💪🇬🇷

This was awkward because I tried to explain in the beginning that I actually am subscribed but it sounded like you couldn't hear me...?

Stav is getting skinny is the face!!!

What chick jajajajaja

Stav back there kissing some weight

First again

guys the end of the world will come and this wont be finished. come on :)