In this video I will show you a solution that I found out when I was putting together my closed wireless in ear system for my band. I was using the LD Systems MEI 100 and when I was using multiple units I ran into problems. So if you are having problems with you in ear system then this video might help you.
do you have a problem with your in ear system does it sound like an old radio well stick around I might have a nursery hi I'm max a from the band psyckadeli and today I am going to show you my new in ear system and I also would like to address a problem that I had would assist them when connecting it all together so what was the problem well when I connected all these together and put them on when I was using one of these receivers it made pretty much a
noise of an old radio when I was walking around it was making all crazy funny noises and it wasn't actually very pleasant to listen to at all when I built this system I went for this LD model that wasn't the most expensive one and it wasn't the cheapest one either I
thought that you had a lot of opportunities here because you could set this frequencies and a system was licensed free which was actually very very good so I read up in the manual how you were supposed to hook it up and also set the channels and groups to be able to use multiple system using this technique I could see in the manual that there was basically two options to vary the frequencies coming from the transmitter to the receiver we had groups and they had channels so I thought well we're a group right so what I did was I set Group one on all transmitters and and then I just basically changed the channels to 1 2 3 & 4 but unfortunately that wasn't enough apparently because when I started it up it was making a lot of noise it was basically like an O radio being turned
to the next station and it was terrible I thought it was something wrong with the system so my first setup was as I said that
group one on all of the components and
then I would just change the channels on
the transmitter to go to the receivers
so a second setup was to use different
grooves and then have the same shells so
I set it to Group 1 group 2 group 3 and
group
or but then I would just use 1 2 3 4 or
just 1 1 1 1 on the channels for the
transmitters but unfortunately he still
had the same problem and I was really
getting frustrated and I thought that
this was probably something wrong with
equipment or I was standing too close to
the transmitters I was walking around in
my house and I pretty much had the same
problem all the time and the problem was
that when I was turning on all the
transmitters that's when I had a problem
but because being old and stubborn at
this age
I decided to try something completely
different I decided to make a settings
with the group 2 channel 2 on the first
one then group 4a channel 4 on the
second one group 6 and channel 6 on the
third one and then group 8 and channel 8
on the fourth one and it was magic that
actually solved the problem and then I
realized that hey wait a minute
the frequencies must have been too close
together because as you can see here the
frequency now are more far apart and
that actually helped it a lot so it
seems that you have to have values that
separate each other is quite a far away
because otherwise it will interfere when
you're having multiple setup like this I
hope this video has helped you and if
you like to see more of these videos
please subscribe to the channel and keep
your eyes out for more cool stuff on
being in a band
28 авг 2024
