Learn how to Use the bernette 37 and b 38 

I am totally in agreement with you.

Aaaahhh, I so can’t wait to get mine but it will take about 2 weeks until I can have it delivered! I can hardly wait!!🤩

Well there’s always fast forward and pause.

This machine will be a bit louder sewing through multiple layers. If you are looking for a quiet machine when sewing heavy duty items, I recommend the BERNINA 335 and up.

Do you mean oil! Oil every 16 hours of the needle going up and down. And in the video I show you how to take out the hook by removing the needle plate. Do that and when the hook is out there is a little hole where a drop of oil goes.

Both. You just need the free motion foot. www.berninaofnaperville.com/collections/bernette-sewing-embroidery-quilting-and-overlocker-accessories/products/b37-38-darning-embroidery-foot

Yes, the feed dogs can be dropped on this machine.

The best way to compare is to visit your local bernina dealer. The bernina 335 is far quieter and better quality. The bernettes are feature rich for the price point.

@@BERNINAofNaperville thank you 🙏!

We have no idea what you are talking about. If the thread feels tight threading through the take up lever, you may not be lifting the presser foot to thread which is necessary for accurate threading. No matter what machine you purchase you will still have to thread a machine this way. Be sure to watch the whole video and thread along. For more support, contact your local bernette retailer for classes and technical advice.

No. The bernette dual feed starts with the b 77 and b 79

Thank you for your suggestion this is currently not on our list of videos. Please be patient, I am one person with a tripod.

Yes in the bobbin area right under where I took out the hook. There’s an area that looks like a candle wick. Just put a drop of oil there.

Thank you for your comment. I’m not sure I fully understand your statement. There’s no need to “catch the bobbin thread” as the machine is designed to sew without pulling up the bobbin thread.

@@BERNINAofNaperville .. well, maybe the b38 is designed that way, but on page 20 of the b37 instruction manual, it shows "drawing up the bobbin thread." Would have been nice to see in person before trying it myself. There are differences between the 2 machines.

You have your bobbin engaged. Look at the top of the machine where your bobbin winder is a move the bobbin winder spool to the left.

@@BERNINAofNaperville TY for answering...I have done that several times. I will take a good look at the winder, my dealer is 45 miles away.

@@BERNINAofNaperville It is working now. thank you

Make sure that the thread is threaded from above through the thread take up lever. Be sure that the needle is inserted in the highest position. These machines can go off time easily so if retreading properly doesn’t do the trick, please visit your local BERNINA/bernette dealer for service.

Dual feed is a system that is built into certain models of a machine. This feature is like having a built in walking foot and is available on the bernette 77 and 79 models and BERNINA 570 through 880 machines.