Love the videos as usual. After watching your break in procedures for nitro motors. I now have a bad ass little ripn Reds R5R. I couldn't be happier with my first nitro break in. It's a wicked little bitch! Thanks for sharing your knowledge. After a gallon and a half it is still showing more. What an engine for the price!
John I took your advice and bought a RCMAX 46cc anodized in red for my Kraken Vecta 5. I got a great deal on it and Chris from Bartolone Racing and John from Detroit Performance gave me a lotto help. I never driven a Fifth scale before but because of you and your RU-vid seminars you got me hooked. Yes, I said seminars bro because you give lectures. I hope you can give me some advice on the RCMAX 46cc gearing hopefully at LI BASH. Thanks brah.
A bro you were talking about dirt getting in through the air filter? Idk but when I run on sand or any dirt for both my 5th scale gas & nitros I put red marine grease on the ends of my air filter and put a layer of grease on the plastic parts that touch the air filter. So that way no air seeps in through the creases & cracks. You do that bro and watch your inside filter be as clean as a shaved bald eagle;) hahahaha no lie tho it works great. If you want I can send you pics of how I do em...solid motors keep brapping bro. I feel many people dont fo that and mess up motors easy. Cus we all know dirt and that nitro piston poppin dont mix. Since I became a botajell subscriber brotha I came up on a lot more gas n nitros hahaha!!!⛽💣💥💨💨💨🍾🍻 keep it up!!
Anthony Charles you should definitely use a a Crank case and pull start Outerwears on it because sand and grit will still get inside and tear up your Flywheel and Coil and mess up your pull start . Next time get a BARTOLONE Engine trust me there great 💥👍💥👊💥🤝💥
Nice video, I see you sent yours in too for the signature series upgrade. It is a whole different engine from the full mod reed case and also tell carlos to put that in his dragster and to leave that g320 in the x2. Since that has the drag mod on it I will use that for what it is since it is not the all around running signature series engine, and also he will need to show the engine some respect because it is a whole different monster!
Brad's Rcs get a stock long block G320 like Carlos did before the OBR signature series 34 Reedcase. Then just install all your plastics on it and coil and carburetor
Hell yea man congrats on your first mod engine carlos and as always great stuff brother zeeaaah!!! Also I definitely need to get a couple of them stickers and rep botajell on my rc's and tool box
@@BOTAJELL I wish I could go to the bash even but unfortunately I live in ohio and just don't have the funds to make it all the way to Li bash altho I will be their in spirit with you guys lol I hope all the rain n stuff from this hurricane doesn't mess up the bash event for you guys
@@BOTAJELL it's all good man......and we definitely will for sure I would sell my soul to the devil to be able to go bashing with botajell for the day lol bur you can guarantee we will meet one day to bash and hangout
Congrats!!! That’s a gorgeous engine... Carlos paving the way for newbies like me that will soon graduate to an OBR Engine with the help of “ Professor Botajell “
I also appreciate the no bullshit attitude you carry through nitro and gas. You inspired me to get back into the hobby and go nitro and gas before goin the easy way of burn your house or garage down lipo way. I have tones of questions to ask just not sure how to ask ya? Do I ask you on here or do you have another platform you use????
Soundwave_9 thank you . You can ask me here but I get lots of questions and invitations to bash but it’s hard for me to talk and be with everyone so I do what I can plus I have lots of work to do for just myself but most of the time I work on many of my friends stuff so it’s extremely getting harder and harder to do everything so I hope you understand
Hellzzz ya I’m sure it gets super crazy my friend, I honestly appreciate you even responding cause some don’t at all. I get a lot from your videos so I try to mimic or take in information to add to the list of things to do with my RC slash RC’s lol
Hi bro awesome engine and vid. I'm currently rebuilding the rear end of my baja (I know the engine isn't done but I've been itching to work in this thing giving that it's been 6 months since it blew up and I haven't touched it since) hopefully tomorrow I'll have the build thread going (hopefully by 6pm if all goes well) I haven't got all the engine parts but close enough and I want to show people my ways of doing it. 👍🤘 Stay safe bro I'm praying that you guys will be fine especially cuz that hurricane looks nasty thankfully I was not effected by Harvey and I hope the same for you!!
I couldn't start my nitro car and it kept spraining nitro out the exhaust. I finally after 20 mins realized that the pressure line was on the carb and the fuel line was on the exhaust. I feel stupid now
Lol we all make mistakes bro! No worries! Once I spent a half hour trying to start my nitro engine and I wouldn't start and when I look closer, the rotostart was going backwards!! Lol
BOTAJELL I can get this engine for 600gbp in the U.K. , how did you sum up this OBR 34cc signature series on the U.K. site it says it’s dynod at 9+HP Would love to hear ur thoughts on its performance 🙏
Bartolone Racing 34 Reedcase is definitely better ! There’s more work done to them and they do best at the track. I don’t like telling people this about other engine builders and I will never do a video about this but you asked me personally so I’m going to tell you the truth of what I see from others and in person since I have both and what I have seen from each Head that they both ported and both crank cases you get more work done from a BR engine!
PED if you off-road? You must use Outerwears because dirt and sand can still enter the pull start and crank case trust me ! You won’t get rocks and twigs like in the past but you will get things sucked in that’s smaller Facts !
BOTAJELL I appreciate it brother you know your stuff! I’m loving watching your content it’s brilliant I’ve learnt so much from you honestly! And I can only imagine how many others have too Thank you for the reply bro 🙏🙏🙏 💯👌
Do you think the obr longblock 34cc reed signature series will be a good upgrade for my Losi 5t? I have a g320 now but I’m going to swap clutch and fan cover etc on long block. Do you think 22/58 gearing will be ok? Do you no what else I will need to make the swap over ezy
Yes that would be a good Engine but you will have to tell Shawn or Dan from obr that it’s going to used in a 5T losi . Just so it will have more torque to push that 4 wheel drive rc around unlike the lighter 2 wheel drive Baja that uses higher RPMs . But if you want more power and more RPMs just a nastier little Engine? You must get yourself the BARTOLONE Racing 32 or even the 34 There nasty bad ass and will be lots of fun. There is more work done to them compared to orbs so that pays off at end of the day
BOTAJELL but do bartalone do 34 longblocks reeds similar to sig series I don’t won’t to get a completed motor I just won’t a longblock with carby I am going to swap my clutch and fan and etc back of my g320 and put it on the new reed long block. The only thing that I don’t like about bartalone is that I’m in Australia and they do t have a phone number to call for customer service, I right obr all the time for advice and set info and they answer the phone... but I did look at bartalone and I can’t see the 34 reed on there web page
George Specs if you want a better performing engine out of a Zenoah style engine? You must get a Bartolone racing engine No ?’s you will be happier with the performance. Leave him a Email and get a price for his 34 Reedcase . If your in Australia how come you don’t use a rooster tail ? I still prefer Bartolone’s work over both of them and even Bartolone’s Modified carburetors are better aswell. I would get a Engine and pipe combo from Bartolone Racing
BOTAJELL I am thinking of getting maybe a rooster tail full mod 34 ported engine but not sure if I’ll be happy with the power. How much more in % do you think a full mod RTE 34 ported engine will be compared to a stock g320? Confused on what to get I want to be able to run 22/58 gearing in my Losi 5t. I also got told that orb do less mods to engine compared to RTE as well.
George Specs if you want the best 34 out of all you must go with Bartolone Racing ! It feels even better then the Scott Finlay 34 . If you can’t get the BR34 or a SF34 ? Go with the RT34 since he’s closer to you and easier to get . Good luck don’t over think this just get something or do what I do get one from everyone lol 😂🤣.