Even with the other video, I'm still out less than an OEM manifold. Start with the cheap stuff and work from there. Would have loved for the lever arm to have just needed the clamp but new manifold it is!
Tick is completely normal. Evap thing on the front of the manifold, can put your finger on it and feel it actuating with every tick. Nothing to worry about.
@westonstaufenberg7278 that's what the 8 bolts and nuts that hold the intake manifold on would do..lol.. and the throttle pipe is literally attached to the block that attached to the TB Over engineering imo.. Germans do alot of that lol
I’m doing this job now and it’s driving me fucking nuts lmao I got so mad and I removed damn near every coolant hoses bc my hands are big and I couldn’t reach anything. I still have to get that support bracket on the backside and I was wondering how you managed to get it out man I’m so annoyed with this car and myself.
The p2015 is not always the whole assembly. It's the arm of the flapper 99% of the time. ECS has a cure for that. They sell a bump stop cover for flapper which helps it open and close. 2.0T TSI Intake Manifold Lever Arm Fix Kit by ECS. Save you hundreds and always solves the problem.
Not sure where your getting your info from but you can run the IE, HPA and SPA intake manifolds with the stock pcv system. IE requires you to buy an install kit and the parts are in the kit as for HPA and SPA its built into the manifold. The only 2 that don't allow it out of the box would be the cts and the ecs tuning manifold
How's that URO manifold running 6 months in? Any estimate on the mileage you've put it through so far? I've been pretty curious how the different brands (URO, Bremmen, 1A Auto, etc) run vs OEM.
My last VW experience was a disaster Mk5 Jetta. Honestly, I hated it but The Golf calls me. Now that I'm a little more experienced in cars and what to look.. Stuck between a Acura TL 3rd Gen or GTI/R... something, fun,practical, and learn manual. Thanks for the video..
I have a 2015 a3 with a p2006 and p2015 code. It’s a brand new manifold and a brand new runner sensor by the oil filter. I still have both codes after swapping that sensor. Anything you can think of?
I looked into a kit but it seems they don't make one for the TSI so a performance manifold seems to be the only way to delete them. Unless you know of a kit I haven't found yet.
@TheParkingLotMechanic I found them on Ali express and a few of the VW performance shops here in Australia, $199 in Australia $70 from ali express eBay has them also about $120aud.
Probably explains why I couldn't find any out here. I had to search in Australia for an SAI block off cause they don't sell them over here either. Which shop is it that has it over there?
@TheParkingLotMechanic STR performance in Europe. Underground division in Portugal, stupid Australian shops. If you don't type it in correctly, how they have it can't be found. Aliexpress sells in singles or bulk. Australian shops vag garage and vag parts are the 2 Australian ones, surely they can source them. Those first two I mentioned have them in stock I looked this morning 👍
@@TheParkingLotMechanic the IE one comes with it I was running it with the stock pcv for a couple months until I found a catch can on Facebook marketplace for cheep
@@TheParkingLotMechanic if you get the IE manifold and plan on goin port injection they sell a manifold for port injection and all you gotta do is get the plugs from precision raceworks to block them off if you don’t wanna use them or you can get the one for port meth and you just put the little plugs in to block it off
Longer studs/bolts that help keep the fuel rail mounted and aligned to the head. Each one has a 10mm nut that keeps the fuel rail pinned when installed.
So what if you're not religious? This isn't even a Christian Channel.. it's a car Channel dude.. either way telling someone Jesus loves you should not be looked at in a negative light.. what is wrong with you
@@chayanesanabria5104 If i tell you to worship the Devil, are you going to be offended? Probably, because you don't believe in it, much the same as i don't believe in Jesus. Pushing your beliefs on someone else has no place on RU-vid
@@JuliaPeterson please tell me exactly wen i pushed my beliefs on someone? ....ill wait I even stated that it wasnt a christian channel ..just the fact that he unfollowed the channel cuz he said "god bless you" was weird..dont have to believe in Jesus to take it as a nice gesture but i guess to each is own..
Makes a nice message at the end and that warranted a negative comment from you. Really shows the type of person you are doesnt it? Hope you find happiness one day.