Level Right Pro for scopes after I made a couple mistakes the first time

Подписаться 32 тыс.

Просмотров 25 тыс.

50% 1

Buy it here amzn.to/2PmnnDS
Help support my channel by shopping Amazon amzn.to/35bZzdK
Real Avid reached out to me after the first video and while they like it, I was made aware that I made a couple little technical mistakes with their product and they asked me to try it their way. Here's the results...
#fclassjohn #scopelevel #scopes DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue to make videos like this. Thank you for the support!
Videos on this channel are for informative, and entertainment purposes only. Using any of the information is at the risk of the individual using the information. We (including RU-vid) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any our videos. By viewing or flagging this video you are acknowledging the above.

Опубликовано:

1 авг 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 32

@2713walker 3 года назад

Great video....and I appreciated your grown up attitude about making mistakes and being corrected.....good job, John!

@raydash2898 Год назад

Thanks for the clarification, I picked up based off your review and it seems to do the trick pretty well.

@556guy4 Год назад

I bought the same thing after I had my primary arms scope mounted by the gunsmith and it was canted. I remounted it by sight and got the reticle level. Once it came and I used it, I found out I was spot on.

@jimtanner8516 3 года назад

O been using the shime system I think is effective and easy

@barrys3135 Год назад

Wondering if you are still using the Level Right Pro 2 years later or if you found you have a more preferred method?

@dannyb8955 Год назад

Go check out McWhorter rifles new video. They level the ACTION, and then use a level line with a flashlight mounted on an upside down ring. You can still buy this system you reviewed, it’s obvious that you level the action, not a piece of plastic or whatever the contraption is in this kit.

@TiroTofang

I bought one, but ended up returning it, because the target itself was not true to the level on the target. when I leveled the board with the target, the actual target was canted.

@user-zf5rv5kz5s

I have this tool but the one flaw is where the scope rings are mounted on the rail. Maybe not perfectly under the receiver? If the receiver is level maybe need to shim the “V” on one side of the level right pro with playing card to equal receiver level. Receiver level should over rule the tool. In a perfect world the rings are exactly over the barrel and this tool would be right on.

@johnh4957 2 года назад

What are your thoughts on allowing 'natural cant' (personal most comfortable shoulder pocket fit) of rifle and then using plumb bob to level reticle and adjust a tube mounted level to maintain it in field?

@yuduul7177

Anyone have the issue of the light not charging? I've gotten TWO replacements from them and none of them charge at all! I've tried using different charging cables as well and none seem to charge the light but works fine on other electronics.

@Murphy_Peoples 3 года назад

I bought one of these today, and I am not impressed. The bubble on the bell side barrel piece was unglued and loose in the box. So you have to question if the bubble mounted into this piece is level from the factory. How do they determine if it's level? I'm going to take it into a machine shop, make sure the bottom is square, then put it on a leveled table and super glue the piece back in. Shoddy craftsmanship from the factory for sure.

@greg-judyjones8974 2 года назад

Nice video. But this looks like a variation of doing the same thing with a plumb line. How is it better?

@robertquintero1681 3 года назад

I'm leaning towards buying this product. How much did you like it and how good were your groups after shooting?

@planeiron241 3 года назад

how do you like the GE scope.

@aarronher6369 3 года назад

Why don't you ask them to do a video to show the correct way how to use the tool.

@slurpyman20 3 года назад

Yeeeah....No.....sounds kinda fishy the mfg “excuses”. No way all that plastic is trued. No way that sliding thingy is trued. Now that machined receiver...hell yeah i trust that more. How can u trust the accuracy of clay vs rock?