LIFTED JEEP COMMANDER ON 33" TIRES!!

Подписаться 23 тыс.

Просмотров 9 тыс.

50% 1

In today's video we fit 33s on our Jeep Commander! It won't be easy, but we're gonna try!
Here are the products we used in today's video!!
H&R Raising Springs - amzn.to/3aPDkgT
Koni Heavy Track Struts - amzn.to/3FXoT8K
Bilstein 4600 Shock - amzn.to/3vyzZfK
SPC Adjustable Upper Ball Joints - amzn.to/2Z565nC
Moog Inner Tie Rods - amzn.to/2Za2Ta0
Moog Outer Tie Rod (Right) - amzn.to/3C4OPNm
Moog Outer Tie Rod (Left) - amzn.to/3nbKH7Z
KYB Strut Hats - amzn.to/3jgjFLL
Strut Lower Insulator - amzn.to/3BVj61a
Bump Stops - amzn.to/3AUVkkC
Front Sway Bar Bushings - amzn.to/3vqfiSY
Rear Spring Insulator - amzn.to/3aRu8bW
AVS In-channel Window Visors - amzn.to/3aVe2Oe
Chrome Lug Nuts - amzn.to/3AYFq8P
Method Race 705 - amzn.to/3vfivch
Kenda Klever RT - amzn.to/3GY4guM
Bump Stop - amzn.to/47fY1xl
CB Engineering Spacer - cb-engineer.com/products/jeep...
Upper Control Arm - www.rocky-road.com/jeep-comma...
Rear Sway Bar End link - amzn.to/3RB50em
Front Sway Bar End link - amzn.to/3RCDgGj
Rusty's Rear Spring Spacer - www.rustysoffroad.com/product...
Offset Box Wrench - amzn.to/41ErUWB
Kryptonite Upper Ball Joint - kryptoniteproducts.com/produc...
Follow us on Instagram - @ExtremeDailyDrivers
Thanks for supporting the channel! You rock!
#jeepcommander #extremedailydrivers #jeep

Авто/Мото

Опубликовано:

25 дек 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 99

@gogoon 7 месяцев назад

Hello, I also brought a Jeep Commander. I run an overlanding club and also run a RU-vid channel. Nice to meet you.

@ExtremeDailyDrivers 7 месяцев назад

Very cool! Thanks for watching.

@turboash78 4 месяца назад

Commanders are still the sexiest SUVs on the road.

@ExtremeDailyDrivers 4 месяца назад

💯💯💯

@chadchristen5126 7 месяцев назад

Thanks for this helpful video. Not a lot of Commander mod videos with quality detail. Looks so dope

@ExtremeDailyDrivers 7 месяцев назад

Thank you. I hope that it's helpful. This video was filmed over three weeks, which always makes things difficult, but I wanted to include a lot of what I was looking for before I started this project. Thanks for watching.

@themerianofamily 7 месяцев назад

I've been following you since you got the Commander. The way you have transformed it is incredible. I'm stuck in neutral with my Commander. The weather in Boston, plus not having a garage, sucks. You continue to inspire me to get a lift, rims & tires. Again, your's is/has been an Apex Commander. It looks sick, amazing & awesome with the new tires/lift 👏! Can't wait to see what's next. Happy New Year!

@ExtremeDailyDrivers 7 месяцев назад

Thank you! It's tough when you don't have a garage. I didn't have one for years, but don't give up. I'm sure you find a way to make some headway on your build. Thanks so much for watching. I'm so glad you are enjoying the build. Happy New Year.

@kenwesters7834 7 месяцев назад

Nice job dude! Definitely done the right way!!! Have fun with your Commander! Thanx for the shout out!

@ExtremeDailyDrivers 7 месяцев назад

Thanks for your help! And thanks for all the knowledge you share on FB.

@OJCoz 7 месяцев назад

The Commander looks awesome bro!!! Your giving mine a run for its money 😉

@ExtremeDailyDrivers 7 месяцев назад

Ha! Thanks! We need to get together someday and do a video together! Thanks for watching!

@bobmanjarrez868 6 месяцев назад

Looks great! I have been doing little mods on my Commander but on the "cheap" like adding exterior hood latches for a more rugged look. Next mod will be doing a wrap on the top to give my Commander the look of having a removable top.

@ExtremeDailyDrivers 6 месяцев назад

Sounds great! Thanks for watching.

@netsiteing 3 месяца назад

Nicely done ... that's a lot of work to fit 33" ... I'm happy with 32" with 2.5" lift and JBAs and pinch weld mod :-)

@ExtremeDailyDrivers 3 месяца назад

I was too, but wanted more! Thanks for watching.

@DoomBeard 2 месяца назад

HI mate, i have just installed the 2" rough country lift, could i run 32's?

@netsiteing 2 месяца назад

@@DoomBeard we run 32" with right wheel offset and pinch-weld-mod at the front to ensure no rubbing so you can do it

@lstruggy 7 месяцев назад

Bro them 33s looks sick! Wait till u start itching for some 38s! 🤪

@ExtremeDailyDrivers 7 месяцев назад

Ha! I would go 35s first! If I did, I would need to regear and definitely go up even higher. I don't think its necessary. Thanks for watching!

@moparmadness74dodge 2 месяца назад

On the heater hoses, just order the hoses without the rear heat/AC and you will not have to mess with any elbows etc. they fit perfectly. I deleted mine too after it was always problematic to prevent the leak at the T’s

@ExtremeDailyDrivers 2 месяца назад

Great tip! Thanks for commenting!!

@raymondbrown4268 7 месяцев назад

Looks awesome

@ExtremeDailyDrivers 7 месяцев назад

Thanks!

@haideralmahmoodi3074 Месяц назад

Great looking Jeeep 👌 enjoy

@ExtremeDailyDrivers Месяц назад

Thanks!

@byronlee6486 7 месяцев назад

Nice video. On my Commander I am running a modified OME lift. (OME heavy duty coils & Bilstein 5100’s on the 1st setting). I too chose the RRO UCA for the same reasons. I’ve had them on for 2 years and have had no issues with them.

@chadchristen5126 7 месяцев назад

1st setting 5100’s meaning the highest from the top or 1st setting lowest setting aka stock?

@ExtremeDailyDrivers 7 месяцев назад

If I was starting fresh right now, I would do the same thing you did. When I bought my suspension pieces it was during the pandemic and lots of stuff was on back order. So that's why I did everything the way that I did. Glad to hear about the RRO UCA's. Thanks for sharing your experience.

@ExtremeDailyDrivers 7 месяцев назад

I don't want to speak for him, but I'm pretty sure he is talking about the lowest setting which is 3/4 inch. Anything higher and you will have axle angle issues.

@byronlee6486 7 месяцев назад

@@ExtremeDailyDrivers. Correct. Lowest setting. I also have had the same tires for 2 years. I love them!!!!!

@ExtremeDailyDrivers 7 месяцев назад

@@byronlee6486 Heck yeah! Klever RT FTW!

@live4mac 7 месяцев назад

The commander looks awesome! This is some really great information! I have a WK Hemi and I'm so close to pulling the trigger on a complete suspension rebuild and lifting it at the same time. I'm definitely going to check out the products you used. I'd really like to be able to fit a set of 255/80/17 tires and go for the skinny 33" look. Did you take hub to fender measurements after adding the spacers? I'm curious how this combo compares to the traditional OME + 5100s.

@ExtremeDailyDrivers 7 месяцев назад

I did not because my cv axles are damn near perfect. If you decide to go through with the suspension lift get the OME HD springs for the extra weight of the hemi. 💪 Thanks for watching!

@mrlariata9290 2 месяца назад

My 06 jeep commander is stock. I need to get on board and start making some changes. Nice jeep

@ExtremeDailyDrivers 2 месяца назад

Thanks! These Jeeps look great with a mild lift and wheels and tires. Have fun!

@syedsadiq4446 4 месяца назад

Super great video

@ExtremeDailyDrivers 4 месяца назад

Thanks for the visit!

@syedsadiq4446 4 месяца назад

@@ExtremeDailyDrivers i follow your videos coz i got too 5.7 XK ✌🏻

@TwowheelJD 6 месяцев назад

Did you eliminate the side plastics on the doors? Can you do a video on that. Thanks

@ExtremeDailyDrivers 6 месяцев назад

I did not. They are still there.

@TwowheelJD 6 месяцев назад

Am sorry, I meant the rocker plastics.

@ExtremeDailyDrivers 6 месяцев назад

@@TwowheelJD Oh yeah, you just pull them off. 5 minutes max.

@Rakish-CB 2 месяца назад

Could you do a video of the whole parts list .. one that would show what’s all needed and best place to get everything for us who want to get it done but don’t have help around.. I would really appreciate it if. It thanks again and the ride looks amazing

@ExtremeDailyDrivers 2 месяца назад

Links for everything are in the video's description. Check my other suspension video too. Everything is listed. Thanks for watching.

@Rakish-CB 2 месяца назад

Thanks mate respect to you for being honest and caring…

@JC-hx6md 7 месяцев назад

Where's the beef!? It's on them 33's! Dude the rig looks fkn gnarly, not a bad way to invest that Christmas bonus! I'm still curious on whether you'll do a wrap or not, I wouldn't but it's always cool to see where you go with your ideas. You should've had Kelly film you driving up so we could see the tank on the street! Merry New Year's XDD nation, cheers!

@ExtremeDailyDrivers 7 месяцев назад

Merry Christmas, JC! Yes, the wrap is happening and I'm hoping (fingers crossed) that it will be awesome. I'm going to pick up some small samples of colors shortly to help narrow down the decision soon. It's going to be a unique wrap, but subtle. Thanks for always watching and Happy New Year!

@Michael_San_240 7 месяцев назад

@@ExtremeDailyDriversyou should check out “tiny bot” for the vinyl wrap you might like there stuff, I’m going to do mine in a flaky carbon fiber black

@seizethecarp_ 5 месяцев назад

Just replaced my heater core T hoses a few months ago. Pain in the you know what. Be ready to pull your intake if you change the entire hose. A lot of people just cut the T out and use a brass T or 90 to replace it but that looks pretty rough.

@ExtremeDailyDrivers 5 месяцев назад

I'm going to do this soon. I'll be replacing the T with a L. I'm going to delete the rear AC and heat. I don't ever use it and it's one more thing to fail. Thanks for watching.

@kylewilson4082 7 месяцев назад

looks good dude! I emailed you about the spc joints

@ExtremeDailyDrivers 7 месяцев назад

Email sent! Thanks for watching.

@RobertoHernandez-bo2vl 6 месяцев назад

Hola que tal me pareció genial, yo tengo mi Commander 2006 esperando hacer lo mismo ya tengo los resortes H&R con elevación de 2", también tengo los amortiguadores traseros, estoy esperando a que me llegue el kit de elevación a 3.5 parte delantera y 3" parte trasera, es tipo Tenedor, también pienso meter el Full Coilovers de la marca Bilstein 5100 Ajustable Roscado marca Jeeperf. Y gracias a tu vídeo voy a pedir esos brazos de control superior y las Rotulas de kriptonita que metiste, espero conseguir también las barras estabilizadoras ajustables, y compensar la caída del diferencial, algún consejo que me compartas te lo voy a agradecer mucho

@ginocrisano4804 6 месяцев назад

Could you go with the rc 2 inch lift with these h&r springs you used ? The rc lift looks like a plate like the one you put in but a little bigger would it be the same height ?

@ExtremeDailyDrivers 6 месяцев назад

No. It would be close to a 6 inch lift and your axles would basically be falling out of your front differential. If you want a 6 inch lift, buy a Jeep Wrangler.

@syedsadiq4446 2 месяца назад

Hi i am wondering if Bilstein 5100 in front and Bilstein 4600 in rear would be compatible as i cannot find B5100 complete set. Your advise would be great as you have Konis in front and Bilstein in rear.

@ExtremeDailyDrivers 2 месяца назад

Love the Koni's and I had 4600's in the rear and preferred the ride. I would love to have Koni's on all four corners, but they will be a little too short in the rear. Thanks for watching.

@Mark_Witblitz 4 месяца назад

Could you please comment on your fuel consumption since running the 33's and how is the tranny changes going?

@ExtremeDailyDrivers 3 месяца назад

1 HWY, 0 CTY. I don't track it. I have no idea. I can tell you that the tranny is doing great. It shifts better than ever. However, I probably would regear if I went anything bigger than 33's. Thanks for watching.

@foo50o 7 месяцев назад

Nice video, I have the Jeep WH in Australia but same platform, good to see people still modding them. Believe it or not, I’m sure I’m the only one in Australia running 4” superlift lift with 35” tyres. Also just learned about the kryptonite ball joints. Thanx

@ExtremeDailyDrivers 7 месяцев назад

The Superlift has been discontinued. You are lucky! Thanks for watching!

@eugeneenslow8563 Месяц назад

JBA UCAs have greasable poly bushings

@ExtremeDailyDrivers Месяц назад

True! But easy enough to add. I have poly bushings on other vehicles and have never needed to lube them. Thanks for watching!

@lowtech_1 5 месяцев назад

Those bolts maybè that why, so they can't fall out.Our at least let you know , if they come loose. Cool looking Commander, Silver black looks awesome. Just subbed 😊

@ExtremeDailyDrivers 5 месяцев назад

Thanks for watching!

@ronthompson5702 7 месяцев назад

I've been following your videos for quite some time on your Jeep Commander and you doing a great job! I just bought an 06 Commander with a 5.7 . Want to do a lift nothing major... I'm thinking about just running a set of Bilstein 4600 will the 22 mm spacer. Hope and that'll give me about an 1.5 inch Lift? With stock springs you think the Ride is going to be Less desirable than the lift springs? Again love you videos and the info!

@ExtremeDailyDrivers 7 месяцев назад

I would replace your springs too. Your XK is 17 years old now and has the heaviest engine. Those stock springs are sagging and worn by now. The ride will only improve with springs that provide a lift. I guarantee it. Thanks for watching.

@ronthompson5702 7 месяцев назад

Thanks for the info! I'll follow your advice! Keep the information rolling brother! Love the links you provide! Your commander is badass! 😎

@ronthompson5702 7 месяцев назад

Another question please... If I run those lift springs you suggest what about the rear end does it go up to inches as well? If so then we've got the leveling issue still to deal with?! Have you sold your uppers and joints? Having trouble finding your email address... Would love to communicate with more... You're a wealth of knowledge on the Commander!!! Thanks! Ron

@ExtremeDailyDrivers 7 месяцев назад

@@ronthompson5702 Yes, the rear will go up as well. If you want a level look you can add some like Rusty's strut plates. Check them out at Rusty's Off-road.

@Michael_San_240 7 месяцев назад

@@ronthompson5702 one thing u gotta keep in mind is that if you off road the Jeep rather harsh, there’s a chance you can mess up your ball joints especially the upper control arm, my suggestion would be if your gonna lift your Jeep, get every part you need, new struts, spacers , ball joints etc. and install it all in one shot, coming in and out could be a headache

@MilesLacoste 4 месяца назад

Did you drop the sub-frame too since you lifted the front to 4”? What are you using to drop it off if you did? Thanks

@ExtremeDailyDrivers 4 месяца назад

Nope. Not necessary. Thanks for watching.

@MilesLacoste 4 месяца назад

But angle is still okay? Thank you! Ive been digging your content. Also have atoto head unit! Hahaha

@ExtremeDailyDrivers 4 месяца назад

@@MilesLacoste Yep. Watch the video again. Axles are practically straight.

@numeprenume7393 3 месяца назад

Salutare. Am și eu un Jeep Commander 3.0 crd diesel limited 218 hp. Ști cuva codul numeric de-la Filtru de polen ( cabin filter). Am aruncat Filtru vechi. Sînt din România. Mulțumesc Frumos.