Lightburn tutorial: Get perfect results using print and cut
Use your laser to print and cut your projects in Lightburn software
Emblaser Pro video information and preorder: darklylabs.com/?aff=3
Join the Laser Livestream Facebook group - / laser. .
If you like this content and want to support us, please feel free to make a One-Time PayPal Contribution: ➜ www.paypal.me/GILP0
Turn your laser cuter into the perfect die cutter by using the print and cut function in Lightburn! You can make stickers, pendants, shapes and anything else you need perfectly with the print and cut functionality new to Lightburn.
Don't eyeball it, but create and set up graphic files that will allow you to use Print and Cut in Lightburn so you get a laser-cut perfect result every time!
In this tutorial, Gil will set up a lightburn file to cut a pre-printed graphics sheet, then go through the steps to align your laser cutter so that you get perfect results every time.
DO NOT cut vinyl on your Lasercutter. You will destroy your cutter and put the operator at risk! Check out how to test your material here: • Could Your Laser Cutte...
Interested in trying out Lightburn for yourself? You can get a 30 day trial of Lightburn to test. www.lightburn.com
Perfect results with Lightburn's Print and Cut tools: • Lightburn tutorial: Ge...
How to make sure the material in your laser is safe: • Could Your Laser Cutte...
Emblaser beginners tutorials: bit.ly/3mKkGvD
Emblaser 2 review: • Emblaser 2 laser cutte...
Building an Emblaser Core: • Constructing an Emblas...
0:00 - Introduction about Print and Cut in Lightburn
1:15 - Preparing the graphics for Print and Cut
1:32 - Preparation in Adobe Photoshop for Print and Cut in Lightburn
3:58 - Creating alignment markers for Print and Cut
6:55 - Saving your graphics in Adobe Photoshop
7:56 - Setting up the graphics for Print and Cut in Lightburn
8:59 - Tracing your graphic in Lightburn
10:28 - Using the selection tools in Lightburn to prepare for Print and Cut
14:36 - Aligning your printed work in your laser for print and cut
15:36 - Moving your laser head to register the alignment marks for Print and Cut
18:56 - Placing Lightbuen into Print and Cut mode for cutting
19:26 - Cutting the job
23:25 - Results of the cut
24:50 - Summery of the Print and Cut tools and ending
Thanks for watching and please subscribe!
Website: goo.gl/HRv9Yc
Twitter: goo.gl/5ag9VR
Facebook: goo.gl/CDCPGe
#Lightburn #printandcut #tutorials
20 июл 2024