Lightburn - Print and Cut

Подписаться 16 тыс.

Просмотров 100 тыс.

50% 1

The Lightburn Print and Cut feature is super handy for using a laser in tandem with printed items such as stickers, sublimation prints, pass through projects, and plenty of other applications. In this video I walk you though how to set it up and use the Print and Cut feature on my sub printed patches.
Lightburn Course
Course.beardedbuildsco.com
Affiliate stuff:
My sub printer:
amzn.to/33iUC29
Amazon Affiliate Products
Amazon.com/shop/beardedbuildsco
Laser Blog:
beardedbuildsco.com/blogs/las...
OMTech Lasers:
omtechlaser.com/LGS
Affiliate code “LASERGUYS”
Coupon code “LASERGUYS5OFF”
OMTech Facebook Group:
/ 1364016877267714
Socials:
beardedbuildsco
Facebook.com/beardedbuildsco

Опубликовано:

8 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 195

@mambaman2007 2 года назад

Wow, this is about the most rare and important instructional in the laser cutting community. I always thought it was impossible to line up after you've moved your engraving. Thanks a lot! 👍🏽

@jimhinkle7245 2 года назад

Cutting with light still amazes me. Nice job!

@tacticalant3841 Год назад

Love the rattle-can organization on the back wall!

@omegapsi2776 Год назад

You give the BEST tutorials. Thank you!

@BeardedBuildsCo Год назад

Thanks!

@johngurney7087 2 года назад

Thank you so much for this, I remove the Job and then found I had made a mistake. Using this method I was able to reinsert the piece and fix the problem. Stay safe from Australia.

@BeardedBuildsCo 2 года назад

That’s awesome!

@MrJSterling Год назад

Looks groovy! I just picked up a hobby laser engraver/cutter and installed LaserGRBL. A friend of mine informed me that in addition to LaserGBL he uses Lightburn, and that I should look into it. Your video has convinced me to pick up a copy of Lightburn. Thanx!

@BeardedBuildsCo Год назад

Awesome! Glad you found my content helpful!

@stephaniebratcher7409 3 месяца назад

This is the exact tutorial I've been looking for! Thank you!

@BeardedBuildsCo 3 месяца назад

You’re welcome! I just released a lightburn course and will have more courses specific to different lasers in the future. Course.beardedbuildsco.com

@patriciawiley99 2 года назад

Holy cow! Thanks for this. I don't even own a laser...yet...but my interest is to print-and-cut around images on different materials. I have seen wood that has images on it that are then laser cut and I am hooked.

@BeardedBuildsCo 2 года назад

You’re welcome!

@hotsonaj 2 года назад

Awesome project

@DouglasLeavitt Год назад

Very cool! I like that idea. I will definitely do this when I get my laser.

@TheClubbinator 3 года назад

Great video, instruction, and direction on this feature. Being retired AF, I could swear I hear jets flying over during your video.

@BeardedBuildsCo 3 года назад

That totally do! We live in northern Utah close to Hill Air Force Base.

@42Pursuit 2 года назад

Great info! I didn't know that lightburn had that feature. Thanks for sharing!

@winstonmccoy2890 2 года назад

Thanks for sharing this. I’m looking at purchasing a laser and my ideas are generating for this type of use. I have a UV flatbed printer. Huge potential with that and this print and cut feature. Thanks again.

@naRevolution 2 года назад

The prints look good, what's the sublimation technique?

@MsMymiracle Год назад

LOVE!

@BeardedBuildsCo Год назад

Thanks!

@DanG-ug1ed 2 года назад

Suggestion from an old screen printer. move your registration marks as far apart as you can. It makes the alignment process more forgiving.

@Dannywwalker Год назад

Thanks, I initially was missing a step so my alignment was off. On my version of LightBurn and xTool D1 Pro a third step is needed to make it work. After setting the second target, the Align Output step needs to be selected then it cuts as expected.

@LT72884 3 года назад

UHP for the win.

@sgtcyclist Год назад

Nice! Like this. Need to give it a try

@FotisKontogiorgos 2 года назад

Thank you, it is great tutorial.

@TomAlger. 3 года назад

That’s awesome, thanks 👍

@BeardedBuildsCo 3 года назад

You’re welcome! 🤜🏻💥🤛🏻

@ironhorsevintagebydonnabro3699 4 месяца назад

Great video. Two questions: Where do you change how many mm your laser moves when you hit the arrow? And, can you do a follow-up video on how you got the outlines and registrations marks into Lightburn?

@jonhimes4885 Год назад

Thanks for the great video! One thing I noticed you changed the distance to .08 for jogging and when I changed mine the distance for each jog didn't change. Is there a setting I need to click for Lightburn to make changes like that to the machine?

@JefferLin Год назад

Thanks!

@CAPOTAOFICIAL 2 года назад

Hi! I have a problem between Neje vs LightBurn with power. The power via Neje seems to be higher. Is there any additional laser setting in LightBurn? Thanks

@opengadgets Год назад

very helpful and also very cool no laser burn marks and masking needed, are there any special settings needed to achieve that?

@mikeburke9848 2 года назад

How thick was your material AND what did you have the power set at to cut through the material?

@valentinrusu8844 2 года назад

So coool !!!

@rickmccaskill7888 2 года назад

How do you print on the plywood. Thanks for sharing. I will try this out on my laser today.

@gabluesky Год назад

Loved this, where can I learn more about sublimating onto wood and what type of printer I would need?

@JefferLin Год назад

Just sent a thank you for your great instructions. Want to cut out stickers, but have PVC/gas concerns. Wonder what you use for sticker materials. Appreciate your feedback!

@blewprent 11 месяцев назад

Thabk you for making this video

@BeardedBuildsCo 11 месяцев назад

You’re welcome!

@BrainDeadEngineering 3 года назад

excellent !

@BeardedBuildsCo 3 года назад

Thanks!

@mikeledee8786 Год назад

Thanks, this will help a bunch. How do you sub on the wood?

@laserfocuseddesignsgiftsll1060 2 года назад

This is great Brandt. I don’t know how you switched to .08 mm to toggle the XY axis?

@erikasynnestvedt9887 Год назад

Hello! I am attempting to make a jig to hold wooden crab mallets. How do you set up the print/cut with cardboard when the cardboard is lower than the hammers will be? In other words, do I set up the print/cut with the bed at the focus height for the cardboard? What happens when I lower the bed to load the crab hammers in the jig?

@USN_WoGW 3 года назад

Great video as always Brandt. I'm gonna be ordering my camera soon and installing it soon. I have to figure a way to remove any "play" in my lid so that I can get extreme repeatability. I'll be utilizing this feature very often.

@BeardedBuildsCo 3 года назад

In this example I did not use a camera.

@USN_WoGW 3 года назад

@@BeardedBuildsCo yep I know buddy. I watch the whole thing a couple times. Your instructional videos are 👍👍 One of my buddies has an epilog pro fusion with a camera. I want that functionality in mine. I just need a sturdy mounting system for better accuracy. The camera when dialed in just makes what you did much easier. But even without the camera that feature is very useful as you just pointed out. Id rather have one piece pre printed than try cutting them all and then trying to print to those cuts.

@jwar2163 2 года назад

Greetings, When you say sub print are you referencing a Sublimation Printer or the sublimation from of transfer from one material to another? Frist time I heard of sub printing in woodworker. I must admit that I have been very busy the last year and have not had any time from much research. I am very curious of how you got the Navy logo onto the board in such clarity.

@Dancopymus 2 года назад

Hi friend, first of all thanks for the tutorial. Did you print on wood using sublimation? There are some tips on the internet using a hot iron, but I don't think it looks good.

@betsyskagen944 Год назад

Can you tell me what sublimation printer and products you used on the birch and is that what you would recommend? Thank you.

@cheryll6232 Год назад

You mentioned having moced your red beam right where the laser engraved, how do you do this..mine is about and 1/8" away. Thanks

@katslod2 2 года назад

Awesome tutorial. Thanks so much. Is your air assist connected to only run when laser is going or was it that way because you turned the laser power on and off? How did you wire to only come on when lasering if thats the case?

@BeardedBuildsCo 2 года назад

I upgraded my air assist setup so that when a job starts the air turns on. I will link the video here. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-y08B1v8-q-c.html

@carolynwilmouth8593 Год назад

How did you prepare wood for sublimation?

@karkijlenahan 2 года назад

How did you print on the wood like that?

@dwightbauer6705 3 года назад

I noticed your head is pretty far away from your material, does that make it harder to cut through thicker boards. I use the cloudray automatic air value to control the air through lightburn, and I want to start using the dried air/cooled air from my compressor for my lasers. also can I ask what brand of tube to run?

@archer7153 2 года назад

How did you sublimate onto the birch?

@mikeledee8786 Год назад

When I do as you for some reason as I jog to the first cross hair the position maker is to the right about 1/2", when I jog to the second and zero in as you then run a text it goes over the crosshairs first, the first one is fine but the second one is off by 1/4" or so to the left and when I run it the head strays from the line, any help with this? Thanks

@JenniferOlin 3 года назад

This is awesome - looks similar to how you line up large things through the pass through? I haven't quite gotten there yet.

@BeardedBuildsCo 3 года назад

Yep exactly the same!

@mikesmith7989 Год назад

Thanks for making this video. One question I have for you. Do you bring your image in as a png or jpeg and then image trace so you can then start wizard function?

@BeardedBuildsCo Год назад

At the end I of the day you have to have a line to cut with lightburn. You can either do that with a vector you have or using an image the you trace. Both will work.

@Daredevil19790921 Год назад

Can you make video paint spray collector? I am interested how you did it?

@loganfreeman8237 Год назад

how did you print this on the wood?Can you make a video about that as well please

@davidsamuels6734 2 года назад

I THANK YOU for this video as I had been wondering about this. The only thing I will need to do is match my red dot pointer with the actual position of my laser on my new Aeon Mira 9.. I will ask then how to do so now.

@BeardedBuildsCo 2 года назад

Pulse on your material and then without moving the laser head adjust the red dot to be right on top of the pulse mark.

@davidsamuels6734 2 года назад

@@BeardedBuildsCo INGENIOUSLY SIMPLE!

@christinesullivan4079 Месяц назад

So I am just starting sublimation. when I import my image which I saved as a pdf from word, the targets are fine but the outline is teensy tiny and off ctr. Also I should be able to place my sublimated piece anywhere on the bed correct?

@SkullyWoodMetal 3 года назад

Nice feature. Good video. I would like to see how the actual printing on the wood is done.

@BeardedBuildsCo 3 года назад

Once I get my sublimation setup put together, I’ll do a video.

@monavieforal 3 года назад

Interested in this as well.

@lpaltageek 2 года назад

Also interested!!!

@bhutch216 2 года назад

Spray a thin layer of Polycrylic on the wood. Print the photos using a sublimation printer. Press the image on to the wood using a heat press.

@1620GarageAndFarm 2 года назад

Nice work !! Do you have a video on how you print on the plywood?

@BeardedBuildsCo 2 года назад

Not yet but I will be doing one soon!

@Stoneheach Год назад

I wanted to engrave some USB-Sticks with a selfmade Jig using this feature. I did everything exactly the same but my engraving was totally off. It wasn't centered on the USB but placed in the lower left corner even tough my file was perfectly centered... Do you have any idea what this could have caused?

@user-yi8bz7bl4l Год назад

Hi, I have a diode laser and I've tried it like you, and it still fails... don't know what it could be..?

@ShaneWhitecloud 2 года назад

I totally need the files for those rattle can holsters on the back wall!

@BeardedBuildsCo 2 года назад

etsy.me/3eRMSJE

@avilla7934 Год назад

Amazing! What laser machine are you using? Is that an OmTech?

@J05hFontenot 2 года назад

What kind of wood was that? Also what wattage laser? It seems impossible to cut through that fast. My 80w has to be slowed down to like 10mm/s at 70% power to be able to cut 5mm plywood.

@BeardedBuildsCo 2 года назад

This is 3mm Baltic birch cutting at 34mm/sec on my 100w. If you have to slow down that much and use nigh power like that you probably have something going on. Most of the time symptoms like this are an indication of an alignment issue. The place where alignment is the most crucial is the 3rd mirror at the top of the laser head down to the material. If that is not dead center you will lose a ton of power and if it is hitting the nozzle on the way out of your laser head then you power is diminished even more.

@rockjano 2 года назад

How precise do you find it??? For me it is about 1mm not better than that I triad A4 A3 with two different printers and I cannot get it more precise...

@jamesseabury4394 10 месяцев назад

I am curious. You didn't explain how you had your two outlines of the sublimation items referenced to the two bulleyes. How did you go about putting the bulleyes on the wood in correlation to the 2 items you wanted Lightburn to cut out for you? Send like a great feature I either missed it or you didn't show it.

@desireeacres2076 4 месяца назад

I dont get how he registered the 2 bullseye to the picture either

@DivineMisterAdVentures 11 месяцев назад

Yeah! But the next step is to automate both halves of the process - especially the calibration step. Doesn't light burn do that yet? Don't forget this feature is a simple button push from the front panel of older units like LaserBox.

@magzter68 3 года назад

Do you know if the wood was coated or was it straight sub to wood? I have had successful wood subbing by applying a thin sheet of laminate on the wood and then sublimating. Looks freaking awesome!

@BeardedBuildsCo 3 года назад

I put a coat of polycrylic on it before the sub.

@dupescraftingdesign7872 2 года назад

Do you heat the poly or just let it dry natural

@dallaskaraokecab Год назад

Hello! how do you dry run the laser cutter ? what I mean is run for test without actually cutting so you know the laser path.

@BeardedBuildsCo Год назад

For this use the frame button in lightburn

@mikelittle9143 2 года назад

I've been wanting to do exactly this!!! What's the process of getting the image to the wood? Do you have a video of that?

@WILDBEES_LATVIA 2 года назад

I wonder abou this too, how he did that, maybe like this: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-3UMNDo2OIP4.html (How To Transfer A Picture To Wood) If You know how it was made in this video- please write me.

@dwbkmj 2 года назад

They have UV Jet printers for glass wood and stone but those are pretty pricey like 10k plus

@WILDBEES_LATVIA 2 года назад

@@dwbkmj Thank You for answer. :)

@LearnMakeLive 2 года назад

How did you change jog settings in lightburn?

@BeardedBuildsCo 2 года назад

In the move tab there are boxes for speed and distance change those to the desired settings.

@Cluanar 2 года назад

I must have a setting off somewhere because my cut always jumps about an 1/8 off to the right and down even though marked both reg marks.

@Cluanar 2 года назад

red dot was off lol works now

@johnnymullins9237 Год назад

awesome. question... it appears you are keeping the lid OPEN while it is cutting. I thought the laser wouldn't light if the lid is open.

@BeardedBuildsCo Год назад

Disable Door Alarm and Machine Protect Sensors on OMtech Laser ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-U6LhuwpaxAU.html

@MicahBBurke Год назад

Exactly what I was looking for. Why can't they make a laser cutter with a inkjet printer head built on!?

@HavoCentral 3 года назад

hmm, is there a mod of some kind to install a camera for lining up? The could be tedious to do for every cut.

@BeardedBuildsCo 3 года назад

Lightburn sells a carmera

@lexispapi Год назад

So laser engraving is new to me. So let’s say you have a round piece of wood and you want a design in the center how do you tell the software where the wood is on the bed then engrave in the center. Thank you!

@BeardedBuildsCo Год назад

This is how Machine Origin, Start Positions, and Job Origins | The first things to learn in Lightburn ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-HNNNsYMIrww.html

@garyloeffler2270 2 года назад

What type of printer are you using to print on the surface of the wood?

@BeardedBuildsCo 2 года назад

I have everything linked in this video ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-APB2ratQew8.html

@ivywright28 2 года назад

I love your channel, I tried every step you did but unfortunately is not working, the laser is not cutting where supposed have to. Are there any way that I can learn step by step on a site or with y’all? Thank you!!

@Barrus01 Год назад

Did you ever figure this out? Mine is the same.

@lisahorton1247 3 года назад

I am using the print and cut feature to cut a piece larger than my bed. When i tell the laser where my registration marks are (1 & 2) it doesn't cut in the correct place. for some reason it shifts slightly. Any idea what would cause this?

@NathanBaerreis 3 года назад

Have you checked your red dot alignment? The first time I tried to use registration marks on a passthrough I had the problem that my cutting laser and my alignment laser weren't hitting the same spot.

@DelilahHani Год назад

How do you add your own registration marks and how do you know where they go?

@BeardedBuildsCo Год назад

You just put them in your design. They can go anywhere.

@AmandaLewis-x5b 8 дней назад

How is the laser power off but still running without the cut? I have the polar, and I'm just now getting it figured out

@BeardedBuildsCo 8 дней назад

On my machine there is a switch for just the power to the tube. For the polar you could set the layer power to 0 min/max and it would do the same thing.

@AmandaLewis-x5b 8 дней назад

@@BeardedBuildsCo thanks

@martinduffy3835 3 года назад

Nice vid mate, just seemed to jump ahead of me. I have used the print and cut feature in Lightburn and I made the registration marks in LB but I am trying to find out exactly what you are showing in this video but before you printed, Did you make those registration marks in the print software so that they transfer into lightburn and then be used by LB

@BeardedBuildsCo 3 года назад

Yes the registration marks are made with the design and also printed to the print transfer paper. Here is another video that might help as well. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-n__saOKVupA.html

@martinduffy3835 3 года назад

@@BeardedBuildsCo Thx mate, Yea I already used that video to make an oversized project and it worked out great, I was just at a loss as to how to create the print file in a sublimation printer and if the registration marks transfer exactly to my laser .

@BeardedBuildsCo 3 года назад

Yeah I created the design in illustrator and used it to make the print and imported the the same design into lightburn.

@nicolebarbeau1795 Год назад

What did you use to print on the wood?

@BeardedBuildsCo Год назад

Polycrylic and sublimation

@bigkahuna2297 Год назад

can you show the sub part wow

@shannonmarie6227 Год назад

How do you do the dry run with the laser power off?

@BeardedBuildsCo Год назад

On my machine I have a key for the laser power and I just turned that off.

@BeardedBuildsCo Год назад

You could also just turn you power to 0 for min and max on the layer.

@believenman 2 года назад

Thanks for the video, cool sublimation, I didn't know you could do that on wood. I just bought a FL-1390 and am new to lightburn. Its been a struggle to get some momentum going. Sort of fall a sleep because some of these trainings get way involved and a bit long winded. Any fast track videos would great if you have them? I am used to corel draw and epilog lasers... new learning curve and its a fight my homie! lol ...

@BrainDeadEngineering 3 года назад

Hope you make more LB videos .. wink !

@BeardedBuildsCo 3 года назад

I have a couple in mind!

@MarshallArtsPics 3 года назад

The file that was printed, how did you move that file to lightburn so that the sizes were exactly the same? What program did you use the create the drawings and how did it import into lightburn? Did you just create those registration marks with a circle and lines?

@BeardedBuildsCo 3 года назад

I use Adobe illustrator to do design work but this could be done with Inkscape which is free. I export as a pdf file with the registration makes that I made with the file. Then I print and import the same file into lightburn. Lightburn’s print and cut feature will actually scale everything once you have the registration marks selected so you don’t even have to worry about the size or alignment.

@MarshallArtsPics 3 года назад

@@BeardedBuildsCo awesome! Thanks for explaining it. I'll give it a shot.

@roxanagriffin4216 3 года назад

@@BeardedBuildsCo when you transfer it to light burn do you leave it as image and after you set the target set do you change it line to cut

@BeardedBuildsCo 3 года назад

All you need to bring over to lightburn is the outline to cut and the targets.

@chessratz686 2 года назад

@@BeardedBuildsCo you might have figured this out already but thought I would save you some time if you haven't, you can just copy paste straight from illustrator. Beats the extra step of saving and importing. Enjoy your videos... and thanks for helping me realign my laser. Different laser but same concept and your video was the best at not complicating it.

@lukewatchorn4868 Год назад

Hi, great video. Do you know of a way to add more targets / reg marks for an even more accurate cut over a larger space? Also how do you turn off the laser for the test? Thanks 😀

@BeardedBuildsCo Год назад

There is not a way to add more registration mark. To increase accuracy you can move the marks further apart. In this video I turned the laser key off or you can turn the power% to 0.

@lukewatchorn4868 Год назад

@@BeardedBuildsCo thanks for the speedy reply. I run a kongsberg large format cutting machine at work and it uses 5 reg marks to read the cut file so I thought it might be similar. I will try spacing the two reg marks out further to increase accuracy. Thanks for the tips and will keep an eye out for further help 👍🏻

@mybike1988 9 месяцев назад

Random question but have you ever encountered a laser crash where the head slams itself into the side wall? I only ask cause I’d love to know what caused this to happen to me an Iv had it happen 3 times now 🙄🤦🏻‍♂️

@BeardedBuildsCo 9 месяцев назад

This is usually due to some kind of short in the axis.

@durrettcustoms Год назад

Where did you get those magnets!?

@BeardedBuildsCo Год назад

I have all kinds of supplies listed here through my Amazon affiliate store Amazon.com/shop/beardedbuildsco It’s under the laser supplies section.

@georgearmijo5992 6 месяцев назад

Can you show the print process please

@scottweinbrecht2143 3 года назад

Wow!! That’s cool!! How do you do the sublimation on the 1/8 BB? That too came out nice!!👍

@BeardedBuildsCo 3 года назад

I had someone else do the print for me but after this I bought a printer today!

@scottweinbrecht2143 3 года назад

@@BeardedBuildsCo those rascals can get expensive !! Lol 😳😂

@stephenkincheloe5218 3 года назад

Do you need an inkjet printer or is it something else?

@scottweinbrecht2143 3 года назад

@@stephenkincheloe5218 I think an ink jet printer will work if you use the right sublimation paper

@donaldwalls8568 3 года назад

@@scottweinbrecht2143 and it takes sublimation ink as well, not just your regular inkjet ink.

@phototec 3 года назад

Great video, however, you did not show on you sublimated the image onto the wood surface? I thought sublimation only works on 100% Polyester fabric and Polymer coated substrates. However, you did not show on you sublimated the image onto the wood surface? I thought sublimation only works on 100% Polyester fabric and Polymer coated substrates.

@dcruicks1 Год назад

this is going to sound silly but how do you put sublimation on wood?

@dcruicks1 Год назад

@Down in the basement with Danita & Chris like polycrylic?

@dcruicks1 Год назад

@Down in the basement with Danita & Chris thank you so much!

@mizraimgonzalez6865 2 года назад

Whats the output (watts) on your laser?

@BeardedBuildsCo 2 года назад

This machine is a 100w

@hmokdad911 2 года назад

I wish if you could send us the file for the paint bottles behind you so I can use it too.

@BeardedBuildsCo 2 года назад

www.etsy.com/listing/994617798

@ms0099rg 3 года назад

Thanks great video .. how did you print on the wood!!

@scottweinbrecht2143 3 года назад

I just searched on RU-vid and you have to get a special Epson printer and a heat press, I believe to do what Brandt did on sublimating the print on the Baltic Birch

@BeardedBuildsCo 3 года назад

Yep, a sub print with heat press

@JenniferOlin 3 года назад

@@BeardedBuildsCo - have you looked into UV printing. I am sorry I ever came across this. (But it is freakin cool.)

@angieangie21 3 года назад

@@BeardedBuildsCo what printer model have you ordered/have please? thanks

@BeardedBuildsCo 3 года назад

amzn.to/3h4Yk7J

@rentasticlv5902 Год назад

Hi! What is that program you are using?

@rentasticlv5902 Год назад

Ok, its probably "Lightburn" :D

@BeardedBuildsCo Год назад

Yep, lightburn

@mariogayoso 3 года назад

What machine do you have and do you have a video on the sub print ?

@BeardedBuildsCo 3 года назад

This is the machine that I have: omtechlaser.com/collections/co2-cabinet-laser-engravers/products/100w-co2-laser-engraver-cutter-usb-1060-us?ref=LGS I had a friend do the sub print but I recently ordered the stuff to start doing it myself.

@mariogayoso 3 года назад

@@BeardedBuildsCo what sub printer did you get ?

@BeardedBuildsCo 3 года назад

amzn.to/3bnuFD9

@mariogayoso 3 года назад

@@BeardedBuildsCo ohh I see. So normal printer with tanks and using sub ink

@BeardedBuildsCo 3 года назад

This one I have to swap out the cartridges to empties that I will fill with sub ink.

@abeirouty 2 года назад

great topic but you just start from middle!! we need to the whole process

@DarkJackal Год назад

When I do print and cut it's off by just a tiny bit.

@BeardedBuildsCo Год назад

Have you tried pulsing on your registration marks to make sure you are in the center of the target?

@espressomatic Год назад

The linked printer is an inkjet, not a dye-sub. Wrong link? Instead of adding a black outline, offset (overprint) the colors that are already part of the image. Then when you cut you'll be left with a clean image without a wonky black outline.

@BeardedBuildsCo Год назад

In this case I wanted the black outline. The printer linked is the printer that I converted to dye sub.