Line output converter install instructions and information | install amp to factory radio

Подписаться 91 тыс.

Просмотров 50 тыс.

50% 1

line output converter installation and information so you can install an amp to a factory radio
This is a car audio how to tutorial that will show you how to install a amplifier to your factory radio with line output converter and give detailed information about line output converters,
SUBSCRIBE FOR MORE CAR AUDIO DIY TUTORIALS radio removals, radio installs, speaker replacement, speaker installs, car audio reviews and much more.
🔻
TAGS:
🔻 #loc #lineoutputconverter #ampinstall
TIME STAMPS:
🔻
0:00 Intro
0:45 What is a Line output converter
1:55 Line output converter wiring explained
2:53 Good in Good out
4:11 Where to install line output converter
5:05 Different ways to install line output converter
8:27 how to get a remote turn on Pac LP7-2 and LP7-4
10:47 Active Line output converter Zapco asp-oeb
12:10 No your amp does not stay on while the car is off
13:48 Which line output converter to use
Did this video help you? Want to support the Channel? Join me on Patreon and get exclusive content and GIVEAWAYS
www.patreon.com/bePatron?u=43...
🔻
WHAT TO WATCH NEXT:
HOW TO WIRE A RADIO: • Car stereo wiring harn...
WHICH WIRE HARNESS SHOULD YOU BUY FOR YOUR CAR: • which car stereo wire ...
HOW TO SAFELY TAP INTO YOUR CAR FUSEBOX: • HOW TO SAFELY TAP INTO...
HOW TO WIRE SUBWOOFERS: • how to wire subwoofers...
HOW TO INSTALL AN AMP TO YOUR FACTORY RADIO • how to install a loc -...
HOW TO INSTALL AN AMPLIFIER • How to install a sub a...
BEST AMP CONNECTIONS • How to install power w...
HOW TO PLAYIST: • how to
🔻
Parts used for this install are: www.jpsaudio.com/shop
Pac sni-15 LOC www.jpsaudio.com/product-page...
Pac LP7-2 LOC www.jpsaudio.com/product-page...
Pac LP7-4 LOC www.jpsaudio.com/product-page...
ZAPCO asp-oeb LOC www.jpsaudio.com/product-page...
🔻
Samsung Glaxay 10e amzn.to/2SiKVKI
~Check out my first channel if you love BASS~ / jpsaudio08
🔻
~Tools I Use almost everyday~
NEW Milwaukee right angle driver amzn.to/2t4mDvM
NEW Milwaukee right angle drill amzn.to/2GwZAwQ
Install bay panel removal tools: amzn.to/2Jv4XiP
Install bay Speaker tester amzn.to/2LHOYki
Digital Multimeter: amzn.to/2Hcz111
Milwaukee drills: amzn.to/2Lxvu1y

Авто/Мото

Опубликовано:

26 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 80

@StupidEarthlings Месяц назад

Love your explanation, straight to the point, zero drifting off to no man's land. Thanks.

@JustinW56 2 года назад

i started working with the Geek Squad at Best Buy 3-4 years ago. I didn't know a thing about car audio. Your channel has basically been my tutorial. I am now to the point that I can do installs in my sleep! Thank you and PLEASE keep up the great work.

@jptheinstallguy 2 года назад

That's Awesome Bruh Keep rocking with me I'll keep everyone up on the car audio game 💯

@beastlychase 2 года назад

My car has no sound I used a line output converter what did I do wrong everything's hooked up right amp kicks on turns off no sound

@roblinprasad528 Год назад

@@beastlychase man i hooked up a line output converter tapping of the stock subwoofer. Everything worked fine for about 3 months and then one day no sound from the subwoofer. Thought blew the subs. Checked it n they were good. Bought n changed the amp thinking it was burnt. Hooked the new amp n it got power but no sounds. Any idea what could it be. Car is 02 lexus ls430 with navi n premium sound system. Btw i never hooked up the power or ground on the pac lc7. Just use the speaker wires.

@averagereviews3389 Год назад

@@roblinprasad528 disclaimer I have no idea what I’m talking about: perhaps your wires got too hot and burned through? I’ve heard that can happen and cause a fire.

@killaok1 Год назад

@Justin56Wd do you guys at geek squad install my loc if I am paying for amplifier installation and wiring and ty In advanced and happy holidays

@Smokingkill187 7 месяцев назад

Facts , this guy knows what he talking about, I learn the hard way

@DatBoyDere Год назад

Just watched my 1st video from you about Acc(blue) wire with add-a-fuse very easy and simple instructions and now I just watched this one after searching LOC install 3vids layers yours pop up again sooooo the algorithm is working my guy New Sun thanks for for the info👍🏽💎

@0look0in0not0out Год назад

I'm subscribed man and your vids are epic for reference JP, I do installs and am a sound engineer, trained analog lol old skool. Put this into your vast knowledge toolbox Bro. With subs, you totally can just twist the loc line ins together and hit a svc sub for signal, stereo image wise. Frequencies below 250Hz are Omni or non directional ok. You cannot hear any left or right even if the engineer hard panned it left and right. The human ear cannot detect that(Haas effect, distance between ears, size/shape of frequencies 20hz-250hz range. That's why subs are mono, or started as.... Lol 57 years old, saw subs evolve! You're right though on the balance/fader issue, but, sub amp gain adjust, or sub level in head unit? Hmmm. Cheers! Luv your work, gold!

@DirtyNate98 Год назад

Thanks I was wondering about tapping off just one side, I figure it was because of panning. Thanks for clearing it up.

@jptheinstallguy Год назад

Thanks for watching

@vicdmonejr6264 Год назад

This was perfect!! Thanks!

@larrycyr2581 Год назад

clutched up with this video man thank you

@alexgamingvi2513 Год назад

Yessir spring time 🙌🙌🙌

@cbclark51 Год назад

@blackcheddar5245 Год назад

This helped so much you have no clue

@rwes2940 2 года назад

Good info. Here is one for ya. Head unit only has left and right speakers. Can you run a LOC to turn it into Left be the front and Right be rear to add 2 speakers?

@mooreboost4653 Год назад

Wavtech bassrestor is the way to go if you have a factory amp skip the basic loc and get the real deal . Your factory amp will lower your bass when you turn up the volume and it will also filter your bass

@throbaxxx Год назад

Good looking bra!!!

@whistlin_372 Год назад

I’ve never done any audio work, my car comes with an OEM 10”kicker but I bought 2 12” kickers to add. So what I understood is I have to add an loc to the factory amp, and get a separate amp for the 2 12’s. What steps am I missing? Do I connect the two amps together at the stereo or how would I go about this. Any info is greatly appreciated!

@kimberlyann1005 Год назад

I’m adding a Skar amp and sub to 2019 Toyota factory amp with metra line out converter. Which set of wires do I use from the factory amp? Thanks!

@JonDoe-nh2zm Год назад

Can you wire both to the rear door speaker ?

@user-md6vo9ub8j 8 месяцев назад

I have the L•O•C PRO 7. I am tapping in to the rear speaker. Only running one woofer with a 250w JL Audio amp. Would like to know where the constant input, remote output, and the audio ground input wires go.

@christopherfrancis3627 Год назад

HI, great video I have a 2019 Toyota tundra crewmax1794 with the factory jbl amp, i need some finding the speaker color so i can connect it to my LOC and sub. thanks.

@cbrcontractingllc.eddiem.36 2 года назад

Hay does it matter to chk to c which speaker has more output the front speaker or rear speaker in a f150. 2010. To wire in loc. thanks

@bernee6969 Год назад

I have a 2012 kia optima sx with infinity system with nav. Which plug is the output on the amplifier an i have 2 loc's,the zapco asp-oeb and ds18 v5hl. Which do you think i shouldn't use? For 2 salt 400.2 an a sia 3500

@justinjames1301 Год назад

I got the lp7-4. Fresh install.. I tapped into both rear speakers intending to lose my left and right balance. splicing left side for front and right side for the rear. Is that okay? Will it cause any distortion because it's sharing the same signal? Will it be a weaker signal because it has to share the load. Im gonna try to tune it tomorrow using a multi meter... I know it's not the best method but I'm just trying to make it sound better then stock. I wasn't impressed hopefully I can make some changes tomorrow

@chaddy.v5065 3 месяца назад

Hey hope all is well so I have a 2019 dodge charger, I am trying to add tweeter to the back left and right door and tap those speaker wires to the rear deck speakers Question is can I still go ahead and tap in the rear deck speakers when connecting my 4 and 2 channel line out converters ?

@quintin1125 Год назад

I have a Nissan Murano 2014. With a factory sub on the back in the spare tire compartment. Where can I get the signal from to add a converter to add a aftermarket amplifier for a sub ?

@havestream663 11 месяцев назад

i have a 4 door so do i only have to tap in to the front door speakers or do i have to tap in to all 4 door speakers

@dreadscott9307 9 месяцев назад

So I’m trying to install the SNI 35 into a Mercedes Benz ML 320. How do I go about finding a speaker wire on that? Behind the radio.

@salvatorecarpinone5132 Год назад

You must makes more videos that My friend

@jasonwilliams7905 10 месяцев назад

I have a 23 trailblazer non Bose and I cannot find a wire harness diagram anywhere. Any idea where I should look?

@deadtakethel205 Месяц назад

I have the snl 15 plugged into the rear deck speakers but it’s causing my sub to make a sort of frequency noise when I accelerate

@qaralysis 5 месяцев назад

My LOC has Left & Right Adjustable channels… could you help me on how to adjust these?

@user-zo4bw2dy2x Год назад

I have a 2022 chevy silverado crew cab with the refresh system non bose how can I add a 4 channel amplifier and a mono amplifier?

@bleezham 8 месяцев назад

ever get RCA noise from the PAC LP7-4?

@erickfranklin4675 Месяц назад

I have a 04 buick lesabre how does the wires connect on battery from high low adapter

@genocopeland 4 месяца назад

I have a lp72 and a 08 Tahoe how do I hook my sub to my stock radio with one sub going to it

@quellsgaming9895 2 года назад

An loc is wired to a fuse or something ? Question I have is how to you turn am loc on and off?

@jamesswain2923 Год назад

I installed a line output converters from after the amp in the rear. Or my Subaru. Hooked up to my Hertz amp. And it sounds bad. Like no highs. Adjust my gain on the loc. Still sounds bad. I have music but sounds low and bad

@Andre-iy2vu Год назад

So I’m guessing if you have a factory amp you tap on the preamp connections right?

@cbrcontractingllc.eddiem.36 Год назад

Yo. Bro. So when I hook my sun up to rear speakers. I only ran wire from One speaker. An then hooked both posative and negs togther from the sub/amp. To the one speaker. It works but was wondering what I am loosing doing this that way. Yo. I really appreciate your help and input. Eddie

@robcbr91 5 месяцев назад

I’m wondering the same thing? I know the balance will be off but honestly idc, and this will be way easier than tapping into the other side. Thank you 🙏

@michaelflowers6048 Год назад

Have you ever had an LP7-2 that would not show any voltage on the multimeter but the LOC is working? I have tried 3 different multimeters with same results. I know it is hooked up right and I am experienced with using a multimeter. 2022 Dodge Ram 1500 Classic tapped in to rear speakers behind the radio. No premium sound system from factory

@user-ti6pb9rc3b 7 месяцев назад

I got the same issue

@brysonpenix7241 Год назад

How will I know what the factory Amp looks like

@riverabh 2 месяца назад

Which one wud I need for my 2014 nissan pathfinder sv...I want to put a amp and sub to the factory radio??..and also wich speakers I have to connect to?? Mines have 13 speakers 😢...how many channel amp I need? Sorry for all the question...but I seriously need help!!!

@riverabh 2 месяца назад

help please?????

@MikeyB90 Год назад

I have a 2ch converter...when i use y splitter to use it on my 4ch amp, sounds horrible and lose allot of power

@miguelmiguel1999 Год назад

What would I use if I wanted to Tap into my rear speakers? I have two rear speakers They only 6.5 inch speakers, is that even a good point to tap in? I want to avoid getting a aftermarket dash.I also have no factory sub. I’m installing a aftermarket sub and amp.

@Signatureofheaven Год назад

As long as those speakers are getting full range frequency, yes. You can tap into those speakers. You will need to splice into the speaker wire. You will need an LOC, either one of the ones he spoke about will work.

@22prez 2 года назад

Hello nice video best I found in RU-vid, I got little problem ,I got g35 infiniti what bose system, is ok if I hook up the converter in there, I got kicker converter

@jptheinstallguy 2 года назад

That should be ok you just want to make sure that your loc can handle the wattage that will be coming out of your bose amp

@22prez 2 года назад

@@jptheinstallguy I v honest i.dont know how many watts come that stock bose amplifier

@22prez 2 года назад

@@jptheinstallguy question I need to install the converted before amp cable or after amplifier cable

@gotchaleahuwub7294 2 года назад

Witch one will be good for a 5 channel amp

@mr.blackhawk142 Год назад

It warlock one will be good for a 5 channel amp (;

@mahdirahmati Месяц назад

Which one is better ?

@Mrkidd_ 2 года назад

Can I use one loc for two subs

@jptheinstallguy 2 года назад

yes the loc is just allowing low level signal to get to the amp your amp will provide power for how ever many subs you may want to power

@justiceholybee 2 месяца назад

So you only tap into the front or back speakers?

@jptheinstallguy 2 месяца назад

As long as the pair your tapping into has bass it doesn't matter which ones you use

@yoooitsanthony3620 2 года назад

Can I use the LP7-4 and the LP7-2 at the same time ?

@jptheinstallguy 2 года назад

Yes you can in that case you would cut the speaker wires run the 2 loc's to the signal side and speaker wires would go to the amps. Thats a really good question I might make a video on how to do that for yall.

@davidpaulk3008 2 года назад

What’s the best way to run a line output on a Lexus 2006 IS250 for my highs

@wazzoa4790 2 года назад

If I’m using the lp7 2 to tap into my factory sub, can I connect the blue remote wire to remote connector on the amp and yellow power wire to the battery connector on the amp? Or do I have to find a way to run wires to the front of the car to tap into the fuse box? Thanks

@jptheinstallguy 2 года назад

ive defiantly seen it done that way. its not wrong if you think about it. you have a power wire going from the battery to the amp and a ground to the amp so some will take the black yellow and blue wire from the lp72 and wire it to the amp as well to catch problem i dont see anything wrong with it just fuse the yellow wire and make it clean...lol

@wazzoa4790 2 года назад

JPtheinstallguy I actually did it and it’s working great so far.

@o751106 Год назад

So, you don’t have to ground the lox??

@Signatureofheaven Год назад

Depends on what type of LOC you use. The SNI-15, you dont.

@jonathanmontes1772 3 месяца назад

Can someone for the love of Christ tell me how to put in a LOC on a 2014 Nissan maxima with a factory Bose amp? Every video is a different freaking answer contradicting the last one…please damn it thank you