Subscribe: www.youtube.co...
Contact: uszlachetniacze@gmail.com
Test addition to diesel - Liqui Moly Diesel Spülung 2666
Removes sediments that accumulate in injectors, injection pump, in the combustion chamber. Solves problems related to uneven engine operation, knocking in the engine. Clean injectors and the injection pump ensure optimum performance and smooth operation of the engine. Prevents corrosion.
Liqui moly Diesel Spulung 2666 How to use?
- As a fuel additive: a 500ml can last for 75 liters of fuel.
- Without dilution as a direct supply: disconnect the inlet and outflow pipes of the fuel and enter them into the container, start the engine, the rinsing medium is sucked directly by the fuel pump, allow the engine to work at different speeds and turn off before emptying the can.
How was the contaminated oil in the test tube?
It is over-worked mineral oil from diesel, in which I dissolved the towot. Then the oil was heated up until it ignited. This procedure was repeated 5 times. In addition, I added lithium grease, ceramic grease, motodrite and addition of MoS2. The resulting oil is difficult to wash.
In each sample there is 1.5ml of contaminated oil (I have a large supply). The oil is distributed throughout the sample. Then the sample is tested on a closed circuit machine - at the end there is a means for rinsing injections / injectors (description in the film). Machine working time 1 minute.
Then it evaluates the condition of the test tube. The speed with which the tested fuel additive cleanses the tube should also be assessed.
If you want to help me buy more oils, oil additives: paypal.me/PiotrTester
11 сен 2024