LOOSE FERRULE / The EASIEST Golf Club Repair 

Awesome, thanks for this video. I used a heat gun on low to warm it up & 5 min epoxy. 👍🏻

You just saved me a headache and money, you're a gentleman and scholar!

Great video for something I thought was going to be much more complex - thanks for doing this!

Unbelievable it’s worked like magic thank you very much

Fabulous to know. Several of my Callaway ApexPro ‘16 irons have had this problem from virtually new. Thank you very much.

I tried your idea of using air to install grips. It was very smooth. Thanks you

Nice video! I have put 2 ferrules in their place right now. Easy trick.

Recently bought some old Maxfli Australian Blades, absolute classics, and every single one had ferrule creep like this. Used a heat gun set on lowest setting (hairdryer would work as well) and a dab of JB Weld epoxy. So easy even I couldn't mess it up.

Nice.... quick and easy .. thank you!

Totally worked! Thanks!!

Excellent video my man. Great repair

Awesome timing, after looking at my clubs today I noticed 7 of my 13 clubs (excluding putter) have creeping ferrules....New grips for 3 and 7 ferrules to be re-attached....time to get things ready for this coming summer.

This worked perfectly. Thanks

This video was perfect timing. I just noticed one of my wedges that I keep in the back of my car for quick trips to the practice area has a separated ferrule. i thought I would need to remove the shaft to replace. I'm going to give your tip a try. Thanks.

Thanks AJ… I’ve got a couple of these that need doing on my old set… 👍

Great video and tip! I tried it and it worked perfectly on a pitching wedge where the ferrule had been creeping up the shaft for a long time. And just like that it was fixed.

Great tip AJ. THANKS

3 iron fixed😊 Thanks for posting this one

Got to fix a couple of my clubs now. thanks!

Have a bunch loose. Thanks AJ.

my 8i had a creeping ferrule before you fixed it !! Great video tip....

Thanks a lot !!! Great video !

Thank you! This is something that has been driving me nuts 😅

I stopped using ferrules on my irons years ago. So easy and quick to reshaft. Much cleaner look just like the old Pings.

Very helpful. Thank you.

Super practical 👏

Thank you so much for the info

Nice job dude

Good video. Thanks

You just saved my lob wedge..... sorta. Thanks for the video AJ. Can do one on saving those expensive ferrules too please?

Thank you! 👍👍👍

Perfect video for me

this worked for me.

Thanks!

excellent!

Little trick I use is to heat the kettle up and use the steam to loosen the ferrule fork adjustments. Works a treat

Bought Taylormade M4 irons 2 years ago from golf galaxy.. this started happening after year one.. brought em back and they blamed it on poor epoxy at the factory and wouldn’t fix them.. called Taylormade and no help either.. I will try this myself.. new subscriber as well!

OEM's slapping crap together and out the door as fast as possible! When I assemble clubs I abrade the inside of the ferrule and epoxy them onto the shafts before I add the quick center for the heads. I have NEVER had a ferrule move on any of my builds.

Thank you

Good stuff

Good video

Wicked, now I can sort my son's Ping iron's

In the UK & Ireland we have a Polyethene sealant adhesive, which ideal for re-setting ferrules, full mastic size tube for £6 -10 once cured very strong and flexible, also a German house hold glue UHU brilliant too used wildly in archery, strong clear and flexible.

Thanks.

AJ! This is Sarge! Love you bro! You have taught me a lot! But maybe i can teach you something i have learned! If you take a micro fiber and spin the clubhead with microfiber around the ferrule it will heat up very quickly! The ferrule will start to spin! No water wasting!! Lol! I then use gorilla gel super glue! Spin that ferrule in the glue as i press it back to the hozzle position!! And so far have not had any recurrence of creep!

Hair dryer or heat gun (on lowest setting) also work well to soften ferrule.

Seriously good video, thank you. I’ve just had a ferrule crack, are you planning on doing any videos showing how to remove and re-install club heads. Thanks again 🙌🏻

Amazing! That’s mate

Managed to get it moving a little and went to move it back to get some glue and it shot up nearly an inch. Looks like I'll need to go for the padded pliers approach!

You can also boil the kettle and put the ferrule over the steam as it boils. This also loosens the ferrule

brand new callaway apex pro 21 - 3 weeks in...after my 4 iron face caved in. it better be just the FERRULE!

Saved me a slight panic attack...had a 2nd hand set come through today and the 7 iron has the ferrule slipping a bit, I was worried I'd gotten shafted (pun intended)...now I know its a simple fix and an easy fix. On a separate note I realize this isn't a new video and you might have adjusted already but I'd heavily recommend you edit your audio to mono as I suspect you've got a stereo mic hooked into your shirt which means your voice is mainly coming through the left channel on headphones or stereo speakers...mind you I spend alot of time with audio so your usual non nitpicking viewers probably aren't bothered at all but the small things can make a difference in audio and video, just like in golf. Cheers

JB Quick is black and most likely what I'll use. I fixed a two-stroke engine case (critical surface) with normal JBweld. The ferrules bugging me most are fitted poorly to gorgeous heads and gleaming shafts with good stickers and grips. I think I'll reshape them before I slide 'em back down to the hosel. I still wonder what led to new looking heads getting the shafts replaced because they match perfectly, just the ferrules weren't done right. Thanks.

Great content!!! What is a fair price to have seven irons restarted?

Same clubs I got

Sometimes, especially on TaylorMade M models, it’s actually the head coming loose and not the ferrule slipping. I’ve had to re-glue many of the TM heads.

Great video, would it be the same process for a loose ferrule on a driver adapter? I.e. the ferrule on my Titleist driver is always slipping down. Cheers

Thanks AJ! I have a ferrule that moved after shipping my clubs on my Mavrik driver. Can I assume the same process for graphite shafted Drivers?

Any recommendations on replacing sole plugs on callaway irons? (not bore thru) And where to get them? Thanks!

Use denatured alcohol for epoxy clean up, not grip solvent or mineral spirits

Ahhh, first world problems. Thank God I still use my ping eye2's. No ferrule. Thanks though, I can fix my brothers clubs now.

What about on a driver - specifically a callaway driver - the ferrule has a collar that goes into the driver adapter - should the collared ferrule be easily slipped back in ?

I have a set of PXG 0311 XP Gen 3 irons that have this issue. Will it work with those or puny irons that have that different ferrule? If not is there a way to fix those?

Can u explain whats a low spin driver head or 3 wood head. When u say spin its the vertical spin or side spin .

Stick the ferrule in the end of a shaft caul tighten gently in a vise and twist gently. Too old to run to a sink . And yes not everyone has a vice and shaft cauls . I had to do 37 a while back . Reselling old iron sets .

AJ, How about a metal wood with graphite shaft? The ferrule has crept up a bit and is not moving. The head appears solidly attached with no shaft movement when attempting the twist test. Hot water did help to move the ferrule. Ferrule is collared type. Any recommendations? Thanks!

This work for the slim ferrule sleeve on Taylormade driver adapters?

Great content...where are you located?

How could I remove stability tour putting shaft graphics? acetone?

Imagine that, it works for everyone but me

hi, how do you fix moved ferrule on a callaway shaft adjustable adapter , mine has moved up un my callaway b21. t

Greetings MOBILECLUBMAKER, I am an avid golfer and my occupation is greenskeeping. I am switching over to be a golf club technician. I was wondering if you could help me out with some of the basics.

This work for graphite, shafts to?

Do I need to glue it down? Or if it creeps up again can I just push it back down ?

Can you do the same thing for a driver

I’ll add to not keep clubs in super hot/cold vehicles. It will extend their life and this will be less likely.

👍

hot Water👌 sooo simple🤷🏻‍♂️

Hi, I used this technique when changing shafts in my irons. However the ferrules are now very loose. They have fixed in place when reshafted but there is a small gap at the shaft end of the ferrules, like they were too big. Any advice? Thanks

I had the ferrule on my 7 iron come loose today… how’d you know?! 👀

Hair dryer works wonders

I tried the hot water and could not get the ferel to move. Any other suggestions.

I have tried this countless times and it NEVER works. The ferrules are essentially locked in place, especially if it’s a graphite shaft.

The easiest way to slide the ferrule? I use a rubber shaft clamp. Just put the shaft clamp around the shaft above the ferrule and use it like a slide hammer to push the ferrule against the hosel after you apply the epoxy.

This happened one of my clubs. I used superglue and it’s been fine. Don’t know why you need to go through all this bs

Do you really need to have Ferrells on golf clubs?

and if the hot water trick doesn't work...?

I tried this before but I fail to get the ferrule moving. Even after holding it under hot water for 10 minutes it doesn't budge :-(

Really love your content. One thing that I've noticed is that you're fairly static, so "mobile" clubmaker isn't quite accurate :D

Why not use a hair dryer or heat gun??

Don't leave your clubs in a hot trunk.

3:43. You’re welcome.

9 minute video to just glue it back in place 😂

Video should have been at least 10 minutes longer. 😐

this could have taken 2 minutes

A 9 minute video to essentially say - loose ferrule? Just glue it back.

8 minute video to say use super glue ..

OMG it took nearly 9 minutes to describe a 20 second fix! argh........

Way to drag out the 1 minute fix.

Wasted a ton of time no …likes to hear his own voice…lol