Losi 5ive Most Powerfull 30.5cc? 2 stroke build Part 2 

Thank you 👍

Hey mate I didn’t weigh it, so i am unsure sorry

I got the wrist pins from heli world a long time ago which doesn’t exist anymore 👎 the caps i just made them teflon, 👍

@@makeorbreak2798 how can I get in touch with you other than RU-vid

Hey @@juiceman7635 you could contact me through Facebook/messenger Srp largescale

Hey mate, setting the squish doesn’t effect the chrome plating at all, however on a well used engine if using thinner base gaskets to tighten the squish clearance isn’t ideal being that the ring forms a ridge in the plating at the top of stroke. Hope that helps 👍

@@makeorbreak2798 Thank you for your reply mate, I really appreciate that. Let me tell you something, you did one of the neatest job on the community, no cap, I believe you can also make decent side hustle income with that skill. Keep up the good work!

@@superkas Thank you mate I appreciate the kind words 👍👍

Hey sorry mate i just do my own cylinders at this stage 👍

@@makeorbreak2798 ok no problem I've got water cooled twin that I need new heads for but the 30cc r out stock have been for almost a yr

@@dopeyiniraq ah good luck man obr should be able to help 👍

Its a du-bro prop balancer, and the wrist pins are from heli-world 👍👍

world-of-heli.de ?

@@yp4525 sorry mate i think its shut down now 🤦‍♂️

What makes you say piston reeds are better than case reeds? Im currently making some cylinder reeds, about twice as big as the cylinder reed kit you can buy.

@@WikWak That would be good however you have to consider crankcase volume. "Charged air" Which is the term for air fuel mixture that is sent to the cylinder is lessened by case reeds this is because of its path of travel which is why case reeds suffer from blowback issues more often then cylinder reeds do. There is much less of a path for some of the charged air to make it into the Cylinder getting rid of more of the "10% spent air" which is the term for whats left into the cylinder after its charged "usually its 10%"IF there is a large enough 5th port and boost port. you COULD do a 6th port but I personally like larger 5th ports because you get more torque. On average you will get more torque out of a piston ported reed then a crankcase reed. you can contact this guy he has more knowledge in piston ported reeds then I do ru-vid.com/show-UC_x31PaM77EtK6osT5b3Qqw

@@TrooperManaic it ran terrible lol. Tuning was just all over the place, the exhaust port does get uncovered at tdc, but it wasnt really a problem with piston port, so idk what the issue is. Id say crankcase volume is still good, its got a stuffed crank and i designed it to have minimal extra space

Hey mate thank you, this is a piston port not a reed valve intake i prefer pp’s over a reed engine in a losi 5ive t reason being is i have designed an air filter which only fits on the piston port engines due to carb sitting closer to the motor than a reed setup. And your spot on 👍 compression is too high but i want to test it first so we can see the gains (max rpm) after cutting the combustion chamber, cylinder is matched to the case this was important as the transfer as wide as they can be 👍

@@TrooperManaic please do show some of your engines running that you've built and ported.

Hey mate I’m not sure i just port my own 😊 👍

It was a china cnc6040 but i have upgraded the gantry, i think you can see it the latest clip

Oh mate that doesn’t sound too good 😂👍

@@makeorbreak2798 i mean, i went further and lost all my low and mid

@@WikWak oh man thats annoying, i have done that myself before, 160 degree intake duration seems to be the limit

Thank you, hopefully about 6hp

@@makeorbreak2798 . I watch IT,s ok i Wish U 10 HP.

@@gonzore.5256 thank you

@@makeorbreak2798 . Some Open Piston Bolt. Gonzore thank U 2.

@@makeorbreak2798 . I Plan my own a 100 CC Race engine 20 HP for Sure. End very Chip. Not Same RC max. Have U Interesse?

Sorry bro i just do my own 😊👍👍

@@makeorbreak2798 totally understand... Can't knock a guy for asking. .. anyway I subbed ! Your work is some of the best I've ever seen . Wouldn't mind seeing a video explaining how you learned all this stuff .

@@donniep90 Thank you 🙏 I appreciate the kind words, i will look into that, 2 strokes have always been a hobby of mine so i have just learnt over the years. Thanks again and thanks for the sub

@@makeorbreak2798 hi are the gcodes available if i want to do my own pistons ??

@@jotech1000 sorry mate theres like 6 or so including mounting, if you have got cnc or router it isn’t to hard to figure out just remember the piston pin is offset .5mm