Lower control arm replacement, seized bolt, worn bushes - Super pro offset bushes - HGT

Подписаться 8 тыс.

Просмотров 17 тыс.

50% 1

Toyota lower control arm replacement.
After a few changes we took the fortuner in for a wheel alignment only to discover there was an issue. as it turned out the lower control arm bushes were worn out and needed replacing.
After talking to Toyota parts i worked out in the long run it would be cheaper to us an aftermarket complete arm set up. I ended up installing Super pro lower control arms with off set bushes. check out the video to see how.

Опубликовано:

1 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 25

@sarin62 2 месяца назад

They only seaze up if you dont do wheel alignments regularly 👍. Simples.

@KFed604 2 года назад

Did the seized bolts cause the arms not to flex and give a stiff ride?

@arwadicfk9889 3 года назад

Respeck bro from indonesia, i like your life😊

@lachlanstill 4 года назад

That was awesome thanks heaps. Will need to do my fortuner soon too.

@jason12lru 2 месяца назад

Thanks mate

@NewlandGolf 4 года назад

Awesome effort mate you've made the worst job imaginable look easy how lucky were u with the cam bolts

@HappyGoTravel 4 года назад

Dusty_ Roads_Aus hahahah yeah I got so lucky with the cam bolts

@davidwigg8408 2 года назад

The OEM bushes in the LCA's on my Prado are trashed after 60K km and I'm looking at the Super Pro LCA's as a replacement option. Any idea why your OEM LCA bushes were toast ?

@HappyGoTravel 2 года назад

My guess would be all the mud and water I drive through. They had a squeak for a long time before I replaced them

@pablos.cargoe7101 Год назад

Great video, thanks. I appreciated the logic behind replacing the entire LCA as opposed to just the bushings, and the visual of worn out bushings. Glad to see your kid still has all his toes. Next time you do this, does he get to swing the sledge hammer and you hold the ball joint in place with your bare foot? 😃

@HappyGoTravel Год назад

Thanks mate. HAHAHAHA if that was the case i'd definitely end up with a broken bone

@carterstouring3009 Год назад

Hey mate How did you alignment look after this Was it a big improvement? I have black hawk UCAS and wondering if I get these lowers to help my alignment Cheers

@HappyGoTravel Год назад

it was good if, anything it probably pushed the wheels out too far for the wheel offset i was running. the major benefit is you can lift the front higher with this combination

@carterstouring3009 Год назад

@@HappyGoTravel yeh Righto What size offset and tyre you got, im running 285/70/17 17x8.5 0offset done guard chop but no BMC just want a little more caster pushed forward but can’t get my alignment right without bushing my camber out Got the black hawk 1 deg UCA

@LewiDaKid Год назад

So why is replacing the bushings more expensive?

@HappyGoTravel Год назад

They were actually more expensive than the whole aftermarket arm assembly. And that was before even considering the cost of paying someone to press them in