Nice work fellas, if only l had enough money. Lucky l came across this clip l was going to tackle it myself but the skill set is out of my league. 462hp that's nice crazy
didn't see a trans cooler go in? and it will need 2 of them , and no engine oil cooler?. they survive no problem on the street without them but heavy 4x4 driving she will cook. learnt from experience . great conversion otherwise!
My dream conversion that I've been planning for a while on my GRX 4.8 Series 4. The big question I have is how do you integrate the Nissan OEM Cruise Control with Chev power train?
they make a module that goes between the engine loom and throttle pedal that replicates the pedal to make the cruise work dekota digital make them alone with a few other company's
@@ZaredFox A couple of things. First; I'm stealing your inflatable pool idea, that's brilliant. Second; I've got the Dakota Digital cruise to work on a GM performance loom and ECU, but I can't get it to work on a LS3, with a HSV loom and ECU. Did you have to change the tune, to get it to work on the Holden ECU's?? Thanks.
Doesn't look like the owner of the pat was very good at maintenance and cleaning of anything. Considering the lack of anything serious mods, wondering why the need for the new arms. OMG, you seriously washed that inside the workshop with other vehicles and all the tools etc etc right there with nothing more than blow-up pool...
How can I do a swap using Lt1 and 8l80 on gu I’m struggling to sort out the parts that will be needed for this swap a little giddiness will be appreciated
I gotta say, even when he didnt do the conversion, and is just fixing the mistakes from another, he does outstanding work, very happy, Thank You Zared.
great video!! enjoyed watching the ZD30 CRD removal . you should make a seperate video just on that and post It in zd warriors on fb I think would be good
Im having a problem and was wondering, when you run the purge tank to the old return line, how do you plump this up at the tank end as the regulator return runs to the tank? Another great video mate that has allowed me to do my own LS1 conversion thanks Legend!!
i run the pressure line from the pump to the reg and return from the bottom of the reg to the tank and use the 10mm feed line to the rail that leaves the return line on the rail free, the purge goes to the carbon canister ( you will need to add one) and then the canister uses the old return line to hook into the tank breather