Lure Making Deep Diving Crankbait - Part 2 

Thank you 😊 well the electronic tape is great because there is no risk of paint flowing under - so the lines are nice and crisp 😉 all the best from Poland 🤙

Yes it does! thank you :)

Thank you 😊 but that's in fact a simple paint job 🙂 there are many custom lure painters around that are much better than me 😉

@@SuchaJerkCustomLures i know and certainly in Holland but you are one off them

Yes, I'm happy too 🥰 unfortunately no time to fish it for the video because my friends are visiting us...

Thank you 😊 that's the plan 😊 although here in Europe we have zander which is walleye cousin 😉

Thanks mate 🙂🇵🇱👋🎣

Thank you brother 🙏

Thank you 😌🙏

Obrigado 🙏 continue fazendo iscas! 💪🎣

Yes, the time saving properties are the biggest advantage 😎 whenever I run late with the project (must be done on Saturday, for editing and uploading on Sunday) UV to the rescue 🦸

@@SuchaJerkCustomLures 🙂👍

Thank you 😊

Muchas Gracias Juan Carlo 🙏 Saludos desde Polonia 👋👋

Hard & Steinbeck model Ultra 👌 The nozzle diameter is 0.2mm - for the mid range airbrush - around 100$ - I'm very pleased with the performance 👍

@@SuchaJerkCustomLures thak you ... Im also using a .2 nozzle airbrush with acrylic fluid colours.. but the flow was incorrect .. and i cand spray metalic acrylic colours . when i use metalic acrylic colours , it get clogs instantly. .. then i started diluting the colours, there is another problem whic is the colours losses its adhesiveness .. What will be you valuable suggestions for me Brother ?

@@abysahadevan7105 well I would say buy a bigger nozzle - .5mm 👌if you already have serious collection of acrylic colours, if not I would suggest to buy Mr. Colour Japanese paints - if available + dedicated leveling thinner - they work wonders 😉

@@SuchaJerkCustomLures thank u so much 😍😍

Dzięki 🙂 pstrągów to on raczej nie zobaczy w swojej karierze - bo za głęboko schodzi 😝

Racja z takim sterem ale malowanieeee superrrr👌👌👌

Grazie mille Marco 🙏👋🇵🇱🎣

Na pewno są najdroższe 😜 więc stosuje tylko i wyłącznie jeśli zależy mi na czasie. Jeśli chodzi o wytrzymałość to mają podobną do żywicy epoksydowej, jedyne co zauważyłem to przy uderzeniu woblerem o beton/most odpada cały kawałek, ale jesli chodzi o drapieżniki, ślady od kotwic to wytrzymałe

Hi Isnan 👋 all the best from Poland 🤙 🇵🇱

@@SuchaJerkCustomLures thank you  Terverifikasi thank you🇮🇩🤙

Actually I could 👌 little one for the perch fishing 😁 🎣

Большое спасибо всего наилучшего из Польши 👋

Thank you 🙂 Circuit board laminate, in 1mm thickness. here is the link: 52,77 zł | Pick Size / Fiberglass Epoxy Lure Lips, 5pcs, Crankbaits, Lure Making (0.6mm 0.8mm 1mm 1.5mm) a.aliexpress.com/_vK6EPi

Muchas gracias amigo 🙂

Muito obrigado 🙏

Muito obrigado 🙏

ขอบคุณค่ะ🙏

Hi, I was planning to add it as always at the end of the video, but the lure was just diving deep immediately and was not visible, based on the water depth, it was still reaching bottom at 3m... unfortunately it stayed there during the first fishing trip 😥

Thank you! Cheers!

Many thanks 🙏

Niestety mój sklep też ma pustki i tak samo wszyscy dostawcy w Polsce 😟 sytuacja bardzo mocno nieciekawa 🤷

In terms of casting it actually flies far and stable - I believe the bib works as a stabilizer 👌 in terms of action in the water - no way to see it cause it just dives straight down and I don't have any clear enough deep spot to check it 🤷

Hola, normalmente incluiría una prueba de natación en cada video, pero aquí el señuelo se sumerge inmediatamente 2 m hacia abajo y no tengo aguas tan limpias para que la acción sea visible 🤷🏻 Solo pude notar que la acción estuvo bien debido a la caña punta agitando correctamente y señuelo nadando recto 😅

2 metros!!! Increíble!lo curioso es que casi no lleva peso...dirías que depende casi enteramente de la paleta?

@@Furtivo_Lures Sí, cuanto más grande es el labio y el ángulo más agresivo, la resistencia del agua empuja contra el labio y hace que el señuelo se sumerja rápido 😉

I already snagged it 😭 on first session after maybe half an hour 😖

🙂👋🇵🇱🎣

Большое спасибо 🙂👋🎣

🙏💜😉

🙏👌💜

Thank you brother 🙏

W tym woblerze akurat czeburaszka wolframowa - bo z racji na slot łatwiej nadziać na stelaż 👌do tonących woblerów używam kulek wolframowych z AliExpress a do pływających śrutu stalowego 😉

🙂🙏👋🎣

terima kasih saudaraku 🙏

@@SuchaJerkCustomLures sama ama saudaraku

Спасибо 🙂

In case there line tie is not in the lure lip you can adjust the ection by bending it opposite direction that your lure escaping 😉

Thank you 🙂

It had stable play, it was just diving straight down, that wasn't good to see what exactly the action was. But based on the rod vibration and braid coming straight it seemed stable. Unfortunately I snagged it during the first 😢 fishing