Lutron Maestro Occupancy Sensors: How to Install

Подписаться 6 тыс.

Просмотров 43 тыс.

50% 1

Installing a Lutron Maestro Occupancy Sensor isn’t difficult. You can do it yourself in about 15 minutes! Here’s how.
Shop for Lutron Maestro products here: www.1000bulbs.com/fil/categor...
Like us on Facebook:
/ 1000bulbs
Follow us on Twitter:
/ 1000bulbs
@1000bulbs
Visit www.1000bulbs.com to see more of our products!

Хобби

Опубликовано:

16 ноя 2014

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 15

@johnroy9654 Год назад

Clear as mud

@1000bulbs Год назад

Good morning John! I am sorry to hear you are having trouble understanding this video produced by Lutron. I recommend contacting an electrician for install but if you have any questions regarding our products, please feel free to start a chat with us on 1000bulbs.com or call 1800-624-4488 to speak with a representative. Have a wonderful day!!

@jrry660 6 лет назад

The information is confusing when discussing 3 way switch install. It would be better to have 2 separate instructions for single pole and 3 way. Also, there needs to be more detail on how to connect the wires.

@1000bulbs 6 лет назад

We'll see what we can do regarding additional installation videos. In the meantime, if you have any questions, please consult a licensed electrician regarding any wiring or installation.

@rockwallranchvideos9987 6 лет назад

Great explanation on the video. This made it super easy to install the 3-way switch compared to figuring out the directions for a non electrician.

@1000bulbs 6 лет назад

Glad we could help.

@dhitch53 2 года назад

Anyone have ideas of something other then a dead switch on the wall from a 3 way switch install?

@lou2032 4 года назад

What is not mentioned in video is to take a mental note of the traveller wire colour that attached to the blue wire in the sensor installed. This wire remains untouched in the second switch box. It’s the other traveller wire that needs to combined with the load/common wire and pigtailed to the black screw on this second switch box that makes it work perfectly. If you fail to do this what happens is that when you press switch box 2 on/off it will cut off power completely to circuit and sensor stops working until you press the switch again. I learned this the hard way. but this video does show the red wire not touched in switch 2 because it is attached to blue wire on sensor side

@zabeeng 4 года назад

Thanks so much!!! Saved me a lot of time...

@Drew1734 2 года назад

I was able to get this fixed to where both outlets on my garage are controlled correctly, but now, my ceiling outlet for my garage door opener is not working. Is the red wire what ultimately takes power to the ceiling outlet or is it from somewhere else? Driving me nuts not knowing how to get power back to that ceiling outlet

@yeatonnet 8 месяцев назад

Good advice, but one comment: in the instructions that came with my Lutron Maestro MS-OPS5M it says the blue wire on the Lutron should be connected to one of the traveler screws on the mechanical switch. So I used both traveler wires, and it works fine. This is different from the video.

@lovablebigt 10 месяцев назад

What about a 3 way that has: 1 black wire, 1 red wire, 1 white wire, 1 bare wire. How do I work with this?

@1000bulbs 10 месяцев назад

Hello! Unfortunately, for that information and set up an assistance of an electrician is needed. Please let us know if you have any questions regarding our products! We can be reached at 1800-624-4488! We also have a chat team ready to assist on our website. Have a wonderful day!

@darrelposegate6454 2 года назад

Goes too fast for a novice

@1000bulbs Год назад

Hi Darrel! I am sorry to hear that the video is too fast to follow. We do offer manufacture wiring diagrams for most of our products however, we always recommend consulting with an electrician with any wiring project. Please let us know if you have any questions regarding our products! We can be reached at 1800-624-4488! We also have a chat team ready to assist on our website. Have a wonderful day!