Luxury Race To The Bottom | Anycubic Kobra 2 Neo Unboxing

Подписаться 3,4 тыс.

Просмотров 15 тыс.

50% 1

With new technogogy comes cheaper, faster, and a better generation of printers. Does the Anycubic Kobra 2 Neo compete with other entry level printers like the Creality Ender 3 v3 SE? We will find out in this unboxing
Anycubic Kobra 2 Neo: www.anycubic.c...
Affiliate links:
Polymaker US: us.polymaker.c...
Polymaker CA: ca.polymaker.c...
Bambu printers: shrsl.com/4doia
West3D: west3d.com/zom...
KB3D: kb-3d.com/stor...
Creality Store: shrsl.com/4et01
Flashforge 5M: shrsl.com/4jzi1
SV08: www.sovol3d.co...
Links:
Website: www.hedgehogma...
Patreon: / hedgehogmakes
XTwitter: x.com/ZombieHe...
Twitch: / zombiehedgehog
Discord: / discord
Info:
Anycubic Kobra 2 Neo
Main Features
5X[1] High-Speed
Boasting a remarkable maximum print speed of 250mm/s. And recommended print speed of 150mm/s ensures a perfect blend of precision and performance, empowering you to bring your ideas to life with unparalleled speed and accuracy.
[1] Compared to products an average printing speed of 50mm/s, data from Anycubic Lab, results are for reference only
Anycubic Kobra 2 Neo - 5 times faster
New Integrated Extruder
The newly upgraded extrusion system and cooling system melt filaments quickly through the 60W hot end. At the same time, it is equipped with a 7000 rpm cooling fan to ensure rapid cooling and molding of the model.
Anycubic Kobra 2 Neo - New Integrated Extruder
Details Even Better
Apply the linear propulsion and input shaping functions in Marlin firmware to reduce spillage and print resonance, improve print quality and stability, and create smoother and clearer model details. Novices can also produce high-quality works for their first print.
Anycubic Kobra 2 Neo - Details Even Better
LeviQ 2.0 Automatic Leveling[2]
With the design of a unique module, the Z-axis offset is intelligently compensated after automatic leveling, and the Z-axis compensation value is supported to meet the needs of different users and usage scenarios, so as to start creation efficiently and easily, and also for novices.
[2] Z-Offset deviation might occur due to the uncontrollable shipping environment. Please adjust the Z-Offset in accordance with the circumstances.
Anycubic Kobra 2 Neo - Auto Leveling
A Completely Renewed UI Design
With the use of 2.4-inch LCD knob screen and the introduction of new design elements, provide a more intuitive, simple, easy-to-navigate interface. Easier to control and use, more agile to interact and respond.
Anycubic Kobra 2 Neo - Renewed UI Design
All-in-One Structure
The whole machine consists of 5 modules with a gantry frame structure design. Easy assembly and less maintenance for a fast printing experience.
#customprinter #voron #ender3 #bestprinter #3dprinting #3dprinter #making #makerdeck #rook #rookprinter

Опубликовано:

11 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 64

@daf051983 5 месяцев назад

Set up mine 6 months, just like the instructions manual and till today, didn't have any problems with my prints.. Pretty happy.

@DOSEDKID 11 месяцев назад

Just got mine today running damn near perfect in less than an hour after not getting a new printer in 4 years, very impressed.

@Betruet 11 месяцев назад

Really liking my Neo. Its my first printer and it has been really easy to use. I've had to learn a lot to be able to get nice prints but it all part of the journey. Thanks for the video there really isn't much coverage specifically for the neo at the moment. P.S. I had absolutely no issues with my Auto levelling. If I had your issue I would be stumped as I'm so new to 3d Printing

@DannyHensel74205 9 месяцев назад

Thank you for making this video. I'm brand new to 3D printing and just bought this one on Black Friday sale as my first 3D printer. This was a great guide for showing me what to expect on setup. Everything went smoothly, and I didn't have the bed-crashing problem you ran into. My first print was the spider, and it came out perfectly!

@jserr9682 9 месяцев назад

I bouth on cybermonday and I should be getting it on Sunday .... did your run into any issues at all I would apreciate it any feedback or advice you have to give also what kind of filament your using Thank you ,

@brid3d 9 месяцев назад

@@jserr9682 I ordered it on Thursday with the Cyber Monday offers but I haven't heard anything since. No shipping confirmation email. Have you had problems too? Is Anycubic slow with shipping?

@DannyHensel74205 9 месяцев назад

@@jserr9682 after using it for a week, I haven't had any issues that I haven't been able to solve just by tweaking the slicer settings. I'm using the Anycubic Slicer since it's simple and straightforward and the default settings seem to work well for this printer. I've mostly been printing with PLA, but I've also printed a few things in PETG. I had to create a new filament profile for PETG in the slicer by changing the temperature settings to the recommended temps printed on the spool.

@chinmayghosalkar3336 8 месяцев назад

what temps do print petg on?@@DannyHensel74205

@seebaastian 9 месяцев назад

mi mother wanted to print a bunch of figures and gnomes to the garden, so mi brother bought the Kobra 2 plus, a 32x32x 40 cm printer, with dual axes to the z edge. is a nice and fast printer. I was a newbee to the 3d printer world. Also Inused the anycubic slicer, it was easy to use and intuitive. I had no problem to understand the settings. I was watching this video because I got a kobra 2 neo for my self. the kobra 2 plus machine is impressive, but is bigger than I'm allowed to, so, i've choosed the smaller version. Thanks for you time doing this review!

@IR-MaNu 11 месяцев назад

You are one of the 1st to make a video/stream about the neo

@lunarobloxofficial 11 месяцев назад

Ive had mine for two weeks and have been dying for someone who is better than me with FDM to make a video with some tips and tricks on the K2 Neo lol

@Betruet 11 месяцев назад

Yes me too! I've been fiddling around with mine for a week and a bit. Finally getting really nice prints after watching so many generic videos and testing a tonnes of things. I've learnt a bunch but its nice to see someone specifically cover the k2 neo.

@The-bashing-zone 8 месяцев назад

I bought the same printer from amazon UK. I didn't have any issues. Printed great out of the box. Waiting for another video after a while of testing. Subscribed!

@Hybrid.Robotics 9 месяцев назад

I really like the way the toolhead attaches to the gantry! This is so right and other printer makers could take a clue here.

@curtiswlkr 9 месяцев назад

28:00 it’s an oversight on YOUR part. Maybe read the instructions???

@ptalten-gz4sz 25 дней назад

Bought this printer back in Feb '24 and just got around to assembling it Friday, 08/17/2024. Not my 1st 3d printer but I still consider myself a bit newish. This is the 1st one I have not had any issues whatsoever. Extremely easy to assemble, loaded filament, did bed calibration and printed the benchy and it came out perfect! I was amazed. No fiddling around with manual bed leveling. No troubleshooting whatsoever. I'm so pleased with it that this is now going to be my go to printer. I also have a KP3S Pro, which used to be my fav and an Anycubic Mega X.

@Kid_illithid 2 месяца назад

I have a question! How do you calibrate the e steps for this printer? I got it and it’s printing, but I’m having trouble getting to run with cura and finding out how to fine tune it

@stepander007 9 месяцев назад

Neo, Kobra Plus, Kobra Max, has inputshaping BUT NOT "Kobra 2". Or maybe i am wrong. But they don't have that Ad Image in a specs about better quality with input shaping.

@Hybrid.Robotics 9 месяцев назад

There would be know way to know the heartbreak is PTFE lined unless you take the toolhead apart like you did. That is a little scary. With as long as 3D Printers have been out now, I see no good reason for PTFE lined hearbreaks. The filament path should be all-metal from the extruder to the nozzle.

@RBarbosa-z5t 2 месяца назад

Which printer is the best in the range of $100-$200 probably $250 personally I have the kobra 2 neo

@RBarbosa-z5t 2 месяца назад

Which one would be my best option besides kobra 2 neo? Sure, here are all the product names together: 1. **Official Creality Ender 3 3D Printer** 2. **Voxelab Aquila D1 3D Printer** 3. **Artillery Sidewinder X3 Pro 3D Printer** 4. **Official Creality Ender 3 V2 Neo 3D Printer** 5. **Creality Ender 3 V3 SE 3D Printer** 6. **ELEGOO Neptune 3 Pro FDM 3D Printer**

@OG_CNTRL 7 месяцев назад

By chance has anyone made a slicer profile on Cura for this printer? I've tried to follow their filament profile from the site but something seems missing. Can anyone help out?

@Kid_illithid 2 месяца назад

I’m having the same issue. If I use their Anycubic slicer it prints pretty well but I’m having trouble getting stuff out of cura

@Morti_FIX_Electro 8 месяцев назад

Nice video :) Pls tell me how wide the printer is with the filament holder installed?

@rewris 9 месяцев назад

Anyone buying or considering buying this unit should 100% do octoprint as well.

@GamingGOATS-ly4kf 9 месяцев назад

mine said that leveling was abnormal but it did not level it and kept puncturing the board so now I have to get a replacement

@AnodizAimed 11 месяцев назад

My Kobra 2 pro PTFE tube is melt and clog my nozzle so bad :(

@firewoodwarrior4396 9 месяцев назад

Kobra 2 Neo or Ender V3 Se? Heelp, i can't make up my mind.

@kylehawk9055 9 месяцев назад

Kobra 2 neo went on sale today down to $160

@ZR411 5 месяцев назад

I’m new to 3d printing and wanting to buy a 3d printer but if anyone who has the printer can you tell me if you can print whatever you want and how?

@Tinker_Balambao 11 месяцев назад

Glad I was not the only one to think.. E ... There is an E connector.. what is E... 😂

@Betruet 11 месяцев назад

Confused the hell out of me too haha 😄

@Kid_illithid 2 месяца назад

If you scan the QR code on the printer it takes you to a more in depth guide on their site. When I read those instructions I found the E was for installing a filament run out detector

@IR-MaNu 11 месяцев назад

Im still waiting for mine😓😓 they are really slacking with shipping it seems, i ordered on September 9th didnt even get a shipping email yet😢 And yes i knew it was a preorder but i hoped it woupd come on October 2nd or something like that, not on October 10th...

@Pfahli94 11 месяцев назад

Same here, even worse is that I could order it via Amazon prime and get it in a day, but they can’t ship out machines preordered over 5 weeks ago. Also kind of weird that there are barely any reviews of it. I regret not waiting for the Bambulab A1 mini.

@lunarobloxofficial 11 месяцев назад

I got mine about 10 days after the pre order however I ordered some of their Filament as well that still hasn't been shipped.

@vincentkinder 11 месяцев назад

I got mine today, but I had no time yet to test it

@IR-MaNu 11 месяцев назад

@@vincentkinder mine is still in transit from germany (im in austria) hopefully tomorrow but most like on the 12.

@bkkorner 9 месяцев назад

How fast does it print?

@jirijiri6355 10 месяцев назад

hi man, please do You have some usefull cura profile for kobra 2 neo ? that one from anycubic is ultra slow...

@antoniomartina8106 9 месяцев назад

Yes pleased, the aren't any settings in Cura

@jirijiri6355 9 месяцев назад

@@antoniomartina8106 really not talking about official profiles ..

@Kid_illithid 2 месяца назад

I followed their guide for setting up Cura for the Neo 2 and I can barely get bed adhesion. But my prints work fine when I use the Anycubic slicer. I’m still trying to figure out why

@Hybrid.Robotics 9 месяцев назад

I am half-way watching the replay of this stream and I have to stop. There far are too many places corners were cut and/or things were forgotten or just left out.

@angelo6mt 11 месяцев назад

I've got the same pronter, I'm having problems with "starting layer blobs" can anyone help me to solve?

@sanekburt 8 месяцев назад

Нужно для начала проверить шаги экструдера, это сделали?

@amal3v0 6 месяцев назад

Helo guys please help i don't know which is the suitable filament size please help😓

@Kid_illithid 2 месяца назад

1.75

@venko3211 9 месяцев назад

If possible to use .8 Nozzle in this printer

@venko3211 9 месяцев назад

Waiting for your reply

@sanekburt 8 месяцев назад

Конечно можно, производительности хватит, только нужно будет работать не на максимальной скорости

@lunarobloxofficial 11 месяцев назад

@Hedgehogmakes have you found any other Slicer besides Prusa and Anycubic to work with the Neo? I tried their profile they provided for Cura however it just goes to the back right corner and extrudes filament for 2 minutes and then says print complete.

@Betruet 11 месяцев назад

Orca is working great with my Neo.

@antoniomartina8106 9 месяцев назад

Me the Same😞

@antoniomartina8106 9 месяцев назад

Me the Same😞

@antoniomartina8106 9 месяцев назад

Me the Same😞

@antoniomartina8106 9 месяцев назад

Me the Same😞

@YevgenSh 3 месяца назад

Don't buy it. Anycubic is incompetent in building 3d printers. They produce unrepairable propreitary shit. They have all metal hotend on Viper but instead they put the nonstandard semi-volcano crap with PTFE finishes in hotend (Are you kidding? ) which doesn't bring any value but make stuff worse, Non-standard heatblock, nozzle, heater , termistor, extruder. Poor display with limited functionality but graphical (O my Good! What a great achievement?) Did you see their jst 2.0 connectors instead of 2.54 on PCB already? They do all you not been able to replace their components with the one from other manufacture. The Anycubic Kobra 2 Neo was outdated 5 years ago.

@arostaky 8 месяцев назад

It is the shittiest 3D printer ever, super bad experience with it.

@sanekburt 8 месяцев назад

Это не принтер плохой, нужно иметь голову и руки,если они не из того места, то покупать более дорогое решение

@jserr9682 9 месяцев назад

this printer is hot garbage i had the same issues i didn't fell like going tru all this i buy this printer to do 3d prints not to be a 3d printer mechanic

@sanekburt 8 месяцев назад

Тогда нужно смотреть на принтеры другой ценовой категории