Machining process #5

Подписаться 479 тыс.

Просмотров 3,8 млн

50% 1

#5 made a chess PAWN!
Next time, Bishop...!?
Click here for the long version!
• Demonstration #1 - Che...
■Products & cutting conditions
①Holder : ADJNL2525M15-A, Insert : DNMG150408-TSF T9115
Vc = 200 m/min, f = 0.15 ~ 0.2 mm/rev, ap = 0.25 ~ 1.25 mm
②Holder : AVVNN2525M16-A, Insert : YNMG160404-ZF T9225
Vc = 150 ~ 250 m/min, f = 0.1~ 0.15 mm/rev, ap = 0.25 ~ 0.5 mm
■Work material : C45
#shorts
#cnc
#machine
#machining
#tools
#ev

Наука

Опубликовано:

21 сен 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 909

@Hellionchild999 10 месяцев назад

I see chatter on that finish!!

@danl.4743 10 месяцев назад

Where?

@Hellionchild999 10 месяцев назад

@@danl.4743 The shaft.

@TungaloyCorporation 10 месяцев назад

Thank you very much for seeing it!

@Silver_Nomad 10 месяцев назад

Well... Easy way to get rid of it: first of all, you are making a copy of door key on a laser cutter, so you can operate this thing with open door. At second you take some sandpaper and polish this thing until it shines like balls of the cat.

@JSMPrimeOperations 10 месяцев назад

Thats what we Turning Guys call SFM Zonk, those SFM Zonks tend to like a little more cutting force with a deeper depth of cut, and a little bit more feed, but that tool angle doesn't offer any favors either, considering what's there it's a pretty decent little guy :P them small parts and them raging RPMs I tell ya,

@Kryptonian76 9 месяцев назад

It's nice that the cutting bits also look like art.

@TungaloyCorporation 9 месяцев назад

Thank you for liking it!

@TungaloyCorporation 10 месяцев назад

Click here for the long version! ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-gBqDhkB-X84.htmlsi=vm739VGKzvDRFVgS ■Products & cutting conditions ①Holder : ADJNL2525M15-A, Insert : DNMG150408-TSF T9115 Vc = 200 m/min, f = 0.15 ~ 0.2 mm/rev, ap = 0.25 ~ 1.25 mm ②Holder : AVVNN2525M16-A, Insert : YNMG160404-ZF T9225 Vc = 150 ~ 250 m/min, f = 0.1~ 0.15 mm/rev, ap = 0.25 ~ 0.5 mm ■Work material : C45

@ravindra9718 2 месяца назад

Drawing dend kijiye

@automan1223 10 месяцев назад

you guys have the nicest short cnc videos on YT !

@TungaloyCorporation 10 месяцев назад

Thank you so much for your compliments! It means a lot to us to hear you say that!

@stacycullum3597 10 месяцев назад

Worlds most expensive chess piece.....

@TungaloyCorporation 7 месяцев назад

Thank you for watching the video!

@inthefade 10 месяцев назад

I never knew that I wanted an entire set of machined steel chess pieces. Maybe one set would be gun blued. It would be so satisfyingly to play on a dense hard wood board.

@TungaloyCorporation 10 месяцев назад

Thank you for watching the video!

@DarthGTB 7 месяцев назад

Put one of the sets to rust and coat the other to not rust

@ChetanSharma-e1k 10 дней назад

I never knew I wanted an antique set of machined steel chess pieces. If you want to buy it then come to our link

@user-vq7oi2fu4b 10 месяцев назад

ケースから取り出すときにピンセットを使い刃先を避けて持つの好き(好き!

@TungaloyCorporation 10 месяцев назад

コメントありがとうございます！刃先命でございます！

@arnaldoalbelda1769 10 месяцев назад

Amazing tools...

@TungaloyCorporation 10 месяцев назад

Thank you for the great compliment!

@kusa_tyan 10 месяцев назад

おぉ…見事…綺麗なポーン…

@TungaloyCorporation 10 месяцев назад

コメントありがとうございます！あとは、ナイト、ビショップ、クイーン、キング！ナイトが難しそうですね★

@jadg1242 10 месяцев назад

クーラントなしで削れるんですね。美しい仕上がりです😊

@TungaloyCorporation 10 месяцев назад

コメントありがとうございます！適正な条件ですと、ドライでもこのように加工できます！もちろん、推奨はクーラント使用しての加工になります！使用する事で、加工面、切屑処理、工具寿命に影響があります！

@jadg1242 10 месяцев назад

@@TungaloyCorporation なるほど...φ(. . ) ドライの方が、動画としては見映えがありますね🙂

@KazukiNishino 22 дня назад

Definitely needs coolant on the one I run, ran it without coolant for 5 seconds and saw sparks flying 😂

@russguppy8761 10 месяцев назад

Gloves maybe, but Tweezer to pick up inserts. I don’t think so. Good video.

@TungaloyCorporation 8 месяцев назад

Thank you for your comment!

@user-pf5gs2sz4o 4 месяца назад

Мелкие вставки удобно доставать с помощью пинцета

@alfredoluisbaute1579 10 месяцев назад

Una maravilla de torno ....

@TungaloyCorporation 10 месяцев назад

¡Gracias por su interés!

@s2Nelsons2 9 месяцев назад

Legal foi ele responder em espanhol kkkkkk

@Winter1881 9 месяцев назад

Очень класно и профессионально,люди будут покупать такие фигугы и шахматы,покажите как вы сделаете коня😊

@TungaloyCorporation 9 месяцев назад

Спасибо за ваш комментарий

@user-dl1nf3dg8n 8 месяцев назад

Коня сделают на фрезерном.😊😊

@alex_ex96d25 5 месяцев назад

😂😂😂😂😂

@sergeyremains9512 5 месяцев назад

станок с чпу.проше простого.сделай это на 1к62@@TungaloyCorporation

@user-xd2og7jd4p 5 месяцев назад

@@sergeyremains9512а чё там делать, если ты токарь? Кроме коня можно на кашке все фигуры сделать.

@Guestpass13 9 месяцев назад

Beautiful presentation 😮😊

@TungaloyCorporation 9 месяцев назад

Thank you so much for your compliments! It means a lot to us to hear you say that!

@consciouslasagne354 10 месяцев назад

Beautiful

@TungaloyCorporation 10 месяцев назад

Thank you for your good comment!

@HDitzzDH 9 месяцев назад

Looking at the surface finish there seems to have been some vibrations.

@TheSzakker22 10 месяцев назад

Perfect! This is steel?👍

@TungaloyCorporation 10 месяцев назад

Thank you for your comment! Yes, work material is steel!

@fernandoveranojimenez 10 месяцев назад

Es maravillosa la maquina

@wilneal8015 10 месяцев назад

😮And It's Pricey As Well😢👍🤗👀✨

@TungaloyCorporation 9 месяцев назад

¡Gracias por su interés!

@roberdanger 10 месяцев назад

Love watching the finishing pass. Slow it down a little for smoother finish

@TungaloyCorporation 10 месяцев назад

Thank you for liking it!

@jiuxie4941 6 месяцев назад

perfect you can see our factory

@TungaloyCorporation 6 месяцев назад

Thank you for liking it!

@hernandezjose9912 10 месяцев назад

Very Nice ❤

@TungaloyCorporation 10 месяцев назад

Thank you for your compliments!

@reimi8841 10 месяцев назад

Amazing 🎉

@TungaloyCorporation 10 месяцев назад

Thank you for liking it!

@ayyanathanmechanical 8 месяцев назад

Beautiful work

@TungaloyCorporation 8 месяцев назад

Thank you for the best compliment!

@nc4805 10 месяцев назад

チェスの駒シリーズですね！

@TungaloyCorporation 10 месяцев назад

はい！シリーズにして最後は社員同士の対決を配信したいと思っています。笑

@pjotrmahouwits 10 месяцев назад

Soldier 💂

@hasanyalcn4821 10 месяцев назад

Şah

@ryonaicorp 10 месяцев назад

That has to be the nicest ass plug I’ve ever seen😮

@Stan-lq1ep 8 месяцев назад

These are one of the most awesome things I'm actually inspired to try and find how to get a job doing this, really awesome.

@TungaloyCorporation 8 месяцев назад

Thank you for the best compliment!

@travisowens8602 4 месяца назад

I used to work in a machine shop when I was 21 or 22. I was on and end mill was think, I used to love to watch the lathe machines work, it was really satisfying to watch.

@TungaloyCorporation 4 месяца назад

It's fun to watch these processing videos! There are many more, so please take a look.

@stocchinet 10 месяцев назад

Remember, engravings give you no tactical advantage whatsoever

@TungaloyCorporation 9 месяцев назад

Thank you for your valuable opinion.

@indubitably424 10 месяцев назад

Looks good. Do it on a manual now.

@TungaloyCorporation 10 месяцев назад

Thank you for your comment!

@indubitably424 10 месяцев назад

Lol. Just giving you a hard time. Apprentice manual machinist here, left handed and learning lathe now myself so I like seeing this content.

@globalrezzanate9399 8 месяцев назад

@@indubitably424 Fair play lad. There is a reason for manual and CNC. Manual is a great way to learn the mathematics and then apply it to CNC and your life will be easier and you will make more interesting parts ..

@buivansang826 10 месяцев назад

Hàng chất lượng cao 🥰🥰🥰👍👍👍

@CNCExpert 10 месяцев назад

Love watching the finishing pass.

@TungaloyCorporation 10 месяцев назад

Thank you for the best compliment!

@nikosozturk801 10 месяцев назад

Vnmg R0.4 and Dcmt R0.8

@TungaloyCorporation 10 месяцев назад

Thank you for your comment!

@dannydetonator 10 месяцев назад

:-D And TiO2 coating..

@azwan7877 10 месяцев назад

Dnmg 0.8 and vnmg 0.4,

@LinhNguyen-cn6pf 10 месяцев назад

YNMG 331

@LinhNguyen-cn6pf 10 месяцев назад

And DNMG 431

@andreyv3432 10 месяцев назад

Мы делаем металлические стружки, много стружки!!

@TungaloyCorporation 9 месяцев назад

Спасибо за ваш комментарий

@user-nz8sh5vj5u 10 месяцев назад

Well done.

@TungaloyCorporation 10 месяцев назад

Thank you for your compliments!

@timothy098-b4f 9 месяцев назад

The pressure on the tip of that insert must be ridiculous. Carbide is amazing stuff.

@TungaloyCorporation 9 месяцев назад

We agree! Sharpening iron is amazing!

@user-fy2pm2yo8p 10 месяцев назад

А коня так может вытачить?

@TungaloyCorporation 10 месяцев назад

Спасибо за ваш комментарий

@user-ej8rq2ti4c 10 месяцев назад

Только лошадь)

@paff4eg 8 месяцев назад

Могу кобылу в соседнем цеху запилить на восьмиоснике 🙂

@user-tj9pc7xg2x 9 месяцев назад

作業工程のダイヤラップやってました。刻印までの工程で商品の検査や寸法のサイズの品質も良い状態だと思います。

@TungaloyCorporation 9 месяцев назад

コメントありがとうございます！

@danashay 10 месяцев назад

Smoooth. Well played.

@TungaloyCorporation 10 месяцев назад

Thank you for your compliments!

@ogliberty5486 10 месяцев назад

Were the tweezers necessary?

@TungaloyCorporation 10 месяцев назад

Thank you for your comment! Yes, we took safety into consideration!

@ogliberty5486 10 месяцев назад

@@TungaloyCorporation you used your hands when placing it into the holder. So make the tweezers make sense when taking it out of the box? Are you just so corporate that you can’t admit that’s redundant?

@TungaloyCorporation 10 месяцев назад

@@ogliberty5486 It was difficult to insert with tweezers and was set by hand. Thanks to the gloves, I was able to set it without problems!

@ogliberty5486 10 месяцев назад

@@TungaloyCorporationso why use the tweezers? Can you just say it was for the video? Because they serve no function.

@TungaloyCorporation 10 месяцев назад

@@ogliberty5486 When attaching the insert to the holder, it was difficult to do with tweezers, so I attached it with gloves on. Although it is possible to remove the insert by hand, we used tweezers to avoid making it difficult for the viewer to see the insert.

@irwandisusanto2406 10 месяцев назад

Amazing

@TungaloyCorporation 10 месяцев назад

Thank you for the great compliment!

@RealNotallGaming 8 месяцев назад

i still remember the best cutter i ever used was like QSER\L and 3.something mm (old series) was beautiful F0.04mm thank you tungaloy ^^ sadly turning inserts are a little under the competition ^^

@TungaloyCorporation 8 месяцев назад

Thank you for using us for a long time! We will do my best to contribute even more to turning chips!

@saygefujiwara-id6pr 5 месяцев назад

Awesome incisors, 👍👍👍👍

@TungaloyCorporation 5 месяцев назад

Thank you for the best compliment!

@user-rh9sz9ew3b 10 месяцев назад

Красивая пешка, залипательно! 😊

@TungaloyCorporation 10 месяцев назад

Благодарим вас за проявленный интерес

@Snooppacoff 9 месяцев назад

Еб.нные шахматы)

@ABIELYASHARAHLA 9 месяцев назад

It amazes me how ceramic cutters can do what they do. Unbelievable!

@TungaloyCorporation 8 месяцев назад

Thank you for your interest!

@phillhuddleston9445 8 месяцев назад

These are carbide not ceramic.

@tentoten-kp6zn 10 месяцев назад

めちゃかっこいい！

@TungaloyCorporation 10 месяцев назад

凄く嬉しいです😭 ありがとうございます😊⭐️

@joshyoung1440 6 месяцев назад

Looks like a chess pawn! Make a whole set!

@TungaloyCorporation 6 месяцев назад

This is a pawn processed! We are planning to have all of them, so please look forward to it! ru-vid.comQfDE0Mq2Smw

@bigdog8177 9 месяцев назад

Try a 3 radius insert 😊

@TungaloyCorporation 8 месяцев назад

Thank you for your comment!

@theabstudios3174 6 месяцев назад

Damn we came from knowing only how to light a fire to this 😳

@TungaloyCorporation 6 месяцев назад

Thank you for your comment!

@joshuabravener3856 10 месяцев назад

This is neat i wasn't sure how to get that steel done in that fashion

@oldnick4707 10 месяцев назад

Hah! Didn't see that one till the very end! 😂

@TungaloyCorporation 10 месяцев назад

Thank you for watching the video!

@PinpointR 2 месяца назад

Should call that one Aztec spear

@TungaloyCorporation 2 месяца назад

Thank you for your comment!

@manhoodshakir8062 10 месяцев назад

Great and strong tools ❤❤

@TungaloyCorporation 10 месяцев назад

Thank you for the great compliment!

@RealNotallGaming 8 месяцев назад

next time use F0.02mm for finishing, a G50 (rpm limit) and a more tough finishing pass ^^

@TungaloyCorporation 8 месяцев назад

Thank you for your valuable advice! The next one is planned for December, so please check it out as well.

@vipinelias7573 6 месяцев назад

Nice work

@TungaloyCorporation 6 месяцев назад

Thank you for liking it!

@justdoiteasyfixservice9488 9 месяцев назад

I want that chess set I’m a old tool and die maker and I would really appreciate something like that.

@TungaloyCorporation 9 месяцев назад

Thank you for your comment! The next one is planned for December, so please look forward to it!

@BrunoBm28 10 месяцев назад

Incrível uma ferramenta de cerâmica q corta o aço ....

@joshyoung1440 6 месяцев назад

Ceramic is just metal that's too hard to melt and must be sintered :) well... that's reducing it incredibly, but the point stands, it's just mostly made of other metals

@Raghunath0405 8 месяцев назад

Super fantastic ❤❤❤❤❤

@TungaloyCorporation 8 месяцев назад

Thanks 🤗

@user-gv4sv8bb5t 3 часа назад

Actually, that part has a mirror finish. There was another different big part on the bench that was only roughed. You just see the reflection. Lol

@samtyuser-km75v 8 месяцев назад

Нашел чем похвастаться. А ты на станке 1960 года выпуска попробуй поработать 😂

@TungaloyCorporation 8 месяцев назад

Спасибо за ваш комментарий

@user-sj3iq2ts4i 5 месяцев назад

角が丸い方が粗挽きですね、角が鋭い方が仕上げなんですね😃結構昔に旋盤加工していましたが、懐かしいです‼️

@TungaloyCorporation 5 месяцев назад

コメントありがとうございます！昔加工されていたんですね、こういった動画見ると加工したくなりますか？

@user-iu3ky9uk2k 10 месяцев назад

это шедевр !!!!!

@user-yl7ws2ih1q 9 месяцев назад

Просто прекрасное зрелище для души

@TungaloyCorporation 9 месяцев назад

Благодарим вас за проявленный интерес

@ostendfaxpost1 10 месяцев назад

Let the tools and engines do the work. We make party.

@TungaloyCorporation 9 месяцев назад

Thank you for your interest!

@user-dw2uy4jv3s 10 месяцев назад

Работал в УПК ученики с удовольствием точили фигурные изделия, шахматы, ♟, подсветчники (тв4 СССР 87г)

@TungaloyCorporation 9 месяцев назад

Благодарим вас за проявленный интерес

@clintonmiller4917 9 месяцев назад

I have no knowledge of CNC Machines or they work. And don't want to know either. But I could watch them work all day. Lol.

@TungaloyCorporation 9 месяцев назад

Thank you for watching the video!

@henriquejesus9099 10 месяцев назад

Nossa que modelagem muito linda

@jiuxie4941 6 месяцев назад

the tolerance is accurate

@benarddemers3392 5 месяцев назад

That would never pass surface finish inspection

@TungaloyCorporation 4 месяца назад

This time we did it dry so that you can see the processing and the product carefully! We think that problem will be solved if you process it with coolant!

@shamsiddin4258 10 месяцев назад

Гениально 👌🇺🇿🇺🇿🇺🇿🇺🇿🇺🇿👍😊😊🇺🇿🇺🇿

@TungaloyCorporation 10 месяцев назад

😊👍🌟

@thomasgorecki1321 10 месяцев назад

Nice, but that’s a tough way to make a chess piece!

@TungaloyCorporation 10 месяцев назад

As you said, it was difficult! We will be doing the second part in December, so please look forward to it!

@user-rv3bc3nz1d 10 месяцев назад

Получилось пешка ♟️ для шахматной доски

@michaelshea4103 9 месяцев назад

It's a ton of fun playing with a laid

@user-sc9cn9ld6u 10 месяцев назад

Превосходная работа!! Просто класс!! Респектище!!

@TungaloyCorporation 9 месяцев назад

Благодарим вас за проявленный интерес

@user-hp3ik5jw9c 8 месяцев назад

Эту пешку я запомнил как делать. Давай выточим, на токарно-винторезном, коня.😂

@TungaloyCorporation 8 месяцев назад

Вы когда-нибудь обрабатывали пешку?

@vinoddusang7784 10 месяцев назад

Its very easy for me but my company will never give me chance to make this timepass piece

@TungaloyCorporation 10 месяцев назад

Thank you for your interest! Are you a machinist?

@feniksflash166 5 месяцев назад

Эти резцы как произведение искусства...

@TungaloyCorporation 5 месяцев назад

Благодарим вас за проявленный интерес

@Cody357 9 месяцев назад

Ooo a pawn!

@TungaloyCorporation 9 месяцев назад

Thank you for your comment! The next one is planned for December, so please look forward to it!

@dmitriyzolotuhin591 3 месяца назад

Эти резцы, как артифакты с другой планеты.

@TungaloyCorporation 3 месяца назад

Спасибо за ваш комментарий

@jimmydelcid8779 8 месяцев назад

A chess piece? that’s it? what a waste of precious metal. 😑

@TungaloyCorporation 8 месяцев назад

We would be happy if you could think of it as a demonstration!

@facorread 10 месяцев назад

The first 3 seconds looked as if you were going to play DnD

@TungaloyCorporation 10 месяцев назад

Thank you for watching the video!

@LinhNguyen-cn6pf 10 месяцев назад

We used Tungaloy insert 20 years ago. Now we using CNMG 432, DNMG 432, VNMG 331 HRM AH 8015 for Inconel 718 150 Ksi cut very good

@TungaloyCorporation 9 месяцев назад

@@LinhNguyen-cn6pf We are glad to hear that! We look forward to working with you!

@cocospops9351 8 месяцев назад

You want Moszkowski maybe? No. Plays Moszkowski.

@TungaloyCorporation 8 месяцев назад

Thank you for your comment!

@dharamendarakumar9776 6 месяцев назад

Good luck hai bhahi😊

@TungaloyCorporation 6 месяцев назад

Thank you for your comment!

@barlove4802 10 месяцев назад

Этой технологии минимум 30 лет.

@TungaloyCorporation 9 месяцев назад

Спасибо за ваш комментарий

@yodaddy82daddy70 6 месяцев назад

Want to impress me, make a knight 😂

@TungaloyCorporation 6 месяцев назад

Knight is difficult, so I guess it's the last one!

@erosnolove 17 дней назад

Can you tell me what camera you used to record this video?👉👈

@TungaloyCorporation 17 дней назад

Canon SLR camera!

@user-in2hf8pu5m 9 месяцев назад

自分が知ってるタンガロイと色が違いました！こういうのもあるんですね

@TungaloyCorporation 9 месяцев назад

コメントありがとうございます！材種の種類も豊富でございます！最近ですと、ピンクっぽい色も出ております。笑最初見た時は二度見しました！

@technikwolle 10 месяцев назад

der rokoko style der cutter is amazing

@TungaloyCorporation 9 месяцев назад

Danke für dein Interesse!

@user-sb9mf6ob2s 9 месяцев назад

Во времена СССР титано танталовые и алмазные пластины валялись на всех складах

@Adam..0 10 месяцев назад

Have a site on her 😂

@islampolo4532 10 месяцев назад

На финише это будет самый технологичный и дорогой набор шахмат, если там работать, то нет проблем.

@TungaloyCorporation 10 месяцев назад

Благодарим вас за проявленный интерес

@englishjake 10 месяцев назад

Needs a sanding but amazing code

@TungaloyCorporation 7 месяцев назад

Thank you for liking it!

@LorienGL 10 месяцев назад

Uffff u can see the bad finish, tons of hours of polishing afterwards

@TungaloyCorporation 9 месяцев назад

Thank you for your valuable opinion. This time, We processed it dry to see the processing clearly, but there should be no problem if you use the recommended coolant.