Main Eco Compact Installation | Full Tutorial

Подписаться 8 тыс.

Просмотров 31 тыс.

50% 1

Main Eco Compact installation tutorial video which shows you how to fit the main combi boiler which is made by Baxi 👍
We show you all the tips and tricks we have picked up from installing over 100 of the main combi boilers.
00:00 - Intro
01:14 - Unboxing Main Eco Compact
01:25 - Valves Explained
02:42 - Job Overview
03:45 - Tip For Valve Storage
04:24 - Apprentice Explaining Steps
05:14 - How To Hang Main Eco Compact Boiler
08:19 - Hanging Main Eco Compact
09:18 - Pre Installation Tips (Water In Boiler)
09:48 - Pipework Arrangement
10:18 - Fitting Flue
13:33 - Fitting Internal Filling Loop
14:59 - Wiring Up
15:53 - Start Up
16:07 - Filling Up Boiler E118
16:49 - De-aeration Mode (Start Up)
17:05 - Look Inside The Boiler
18:16 - Commissioning Mode Min & Max
19:00 - Outro
----------------------------------------------------------------------------
⭐⚒️Buy Tools The Tools I Use Here ⚒️⭐ - amzn.to/3Yzop0H
💬 LEAVE A COMMENT we would ❤ to help you out and hear your feedback 💬 (We answer all questions)
👍👍 Please show support by pressing the LIKE button 👍👍
&
🟥 Subscribe for more Plumbing & Heating Videos: / @plumbingdoctors 🟥
😎 Recommended Playlist - How To Videos 😎 • How To - Videos
Let’s connect:
🔘 www.plumbingdoctors.co.uk 🔘
🔵 Facebook - / plumbingdoctors 🔵
🟤 Instagram - / plumbingdoctors 🟤
🟣 Twitter - / plumbdocs 🟣
⚫ TikTok - www.tiktok.com/@plumbingdocto... ⚫
⚪ LinkedIn - / plumbingdoctors ⚪
---------------------------------------------------------------------------------
💎 Who Are The Plumbing Doctors 💎
Waseem is the Owner/ Lead Engineer and Curtis is the Apprentice. Plumbing Doctors specialise in Domestic Plumbing, Heating & Gas Work. Waseem decided to focus on creating RU-vid Videos during the first lockdown in 2020 as he wanted to share his knowledge in this industry to help anyone who wanted to learn during the hard times.
We are located in Coventry, West Midlands, UK.
Email: Info@plumbingdoctors.co.uk

Хобби

Опубликовано:

8 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 242

@asifarshad6423 3 года назад

Been waiting on this 1, as always quality video! Great content, have heard these Boilers are real good. Thanks for sharing br 👌✅💯

@PlumbingDoctors 3 года назад

Yes good boilers I fit these every week 👍🏻

@neilbirkett835 3 года назад

Love the videos, keep em coming.

@PlumbingDoctors 3 года назад

Every sunday at 4pm 👍🏻👍🏻👍🏻

@DaBriars 3 года назад

Love your channel Best on RU-vid by far Thanks for sharing

@PlumbingDoctors 3 года назад

Thanks 😊

@laurentiudaniellobont625 3 года назад

Very nice and good video!!!! All the best !!!!

@rajeshbangera6149 3 года назад

Thanks for your detailed video. Its definitely helps new comers. Cheers

@PlumbingDoctors 3 года назад

No problem 👍🏼

@parvizahmadi298 3 года назад

Thank you, very informative. helped me a lot.

@MohammedAli-lb3en 2 года назад

Great video 👍

@andyr2011ar 2 года назад

Just found you. Enjoyed your video. Cracking job. Following mate.

@jsmid 3 года назад

Good video keep them coming

@user-li8gr8ur8l 4 месяца назад

Good job Waseem. Made the look easy.❤

@PlumbingDoctors 4 месяца назад

Thank you 😊

@sodig876 3 года назад

Good video 👍 proper real world work. Not fitted a Baxi combi since the Netatec! days Will definitely consider it now not many boilers come with brass components inside nowadays.👍

@PlumbingDoctors 3 года назад

Thanks mate.. Ive come across a few Netatecs they have the gas valve which is adjustable from the display.. I fit these everyweek and not had any major issues and the build quailty it great 👍 well worth the money 😎

@Razz60 3 года назад

Brilliant video bro thanks

@simoncarpenter9119 3 года назад

Top video cheers.

@ondarae642 3 года назад

Great video, helped me to find the water inlet to re-pressure the boiler, as I over vented the radiators, and the boiler went off just at the weekend when I couldn't get any help. So massive thanks.

@PlumbingDoctors 3 года назад

No problem!! - I also have made a shorter video just for increasing pressure if you search other vids

@ondarae642 3 года назад

@@PlumbingDoctors Will do, and thanks again.

@lalaji92 2 года назад

Best video ever so clear welldone bro keep it up ma sha Allah

@imaginehomes3871 2 года назад

Thanks for the installation vid. I got a PCB for a Vaillant Ecotec 831 for £75 and fan for £110 all fitted for £80 and it's been running for years since. Didn't need a new boiler. I do always have Main Eco Compact Combi or system as replacments.

@PlumbingDoctors 2 года назад

Landlard had enough and wanted new boiler so i replaced ;) - i love repairing tho

@ashokrawal3820 3 года назад

Great. Video, thanks

@darrenowen3338 Год назад

Excellent, informative video. Thank you.

@PlumbingDoctors Год назад

Glad it was helpful!

@saidahmed410 Год назад

Thanks brother. I like your all video. Very helpful video for me as a new Gas engineer. 👏👍😊

@nkhalid677 2 года назад

Great video as I’m new gas engineer very helpful

@mistaceali1177 3 года назад

Excellent video bro 👍🏽

@PlumbingDoctors 3 года назад

Thanks bro

@bahiaharjinder 3 года назад

Nice demo thanks Job done 👍

@PlumbingDoctors 3 года назад

Thanks

@abchannel3737 3 года назад

Excellent

@SilatFanTV 2 года назад

Thanks for this. Quick question. Ive got low water pressure and need to turn both blue knobs open. My second blue knob (on the right) has been installed in such a way that when I try turn it fully open its stopped by the bigger black knob behind it. Im assuming incorrect installation. Am I safe to turn the black knob to allow me to turn the blue knob? What can I do? Thanks

@PlumbingDoctors Год назад

twist the blue knob around or try closing the black knob but may not let water into the system

@barrydoherty636 3 года назад

Well done.

@iftakharmohammed1942 Год назад

Very helpful

@emekaABC 3 года назад

Mr Gods sent !! well done ....HW

@ShadowRealmGoalkeeper 3 года назад

Very helpful video Waseem bahi I’m new in this game and learning a lot from your videos

@javed3006 3 года назад

Very helpful video for new student thank you

@mohammedrafiq3052 2 года назад

Very good video just to point out if you want to run pipe work from behind boiler I think they do a bracket that will allow you to do that

@theetheeyog9878 3 года назад

Good work pal there are other chanel they don't wont to show as much detail as you do when it comes to fixing boilers

@PlumbingDoctors 3 года назад

Thanks buddy! Im just trying to help share some knowledge

@jazdhaliwal2213 3 года назад

Really good video

@PlumbingDoctors 3 года назад

👍🏻👍🏻

@hamzaparvais3948 2 года назад

Thank you extremely knowledgeable Great

@PlumbingDoctors 2 года назад

Your welcome

@ram64man 7 месяцев назад

I miss your videos sir, please bring them back soon

@PlumbingDoctors 6 месяцев назад

👍🏽 thanks bro

@davebayliss3142 3 года назад

Brill vlog 👏👏

@ismailbhayat6801 2 года назад

Well explanation

@PlumbingDoctors 2 года назад

👍🏼

@1Monaghan 3 года назад

Love these boiler install videos. Great work. How does the inner flue seal when being pushed into the elbow? Do you Leave it a little bit longer than the outer flue and it pushes inside the elbow?

@PlumbingDoctors 3 года назад

No with these boilers you cut the inner flue the same size as outer flue 👍🏻

@PlumbingDoctors 3 года назад

The flue elbow has two rubber seals: large seal for outer flue and small one for inner flue ✌🏼

@rayc1503 3 года назад

No white should of the flue Should be visible on the outside. 👊🏼

@Shah-uw7pc 3 года назад

Good video

@riazulhaq6211 Год назад

Excellent informative video

@PlumbingDoctors Год назад

Glad it was helpful!

@simonhelps302 3 года назад

When cutting flue for example. One mark for measurement....then wrap a piece of paper snug and inline( quick to do) then run marker around paper 100% square everytime.

@PlumbingDoctors 3 года назад

Nice 👌

@rayc1503 3 года назад

Btw the flue's supposed to be dead on straight out the wall. The flume exhaust already has condensate fallback built in. At baxi training they said with the main eco compact the back top casing can be trimmed off to accept vertical pipework. It's why they come with the vertical pipe bracket in the box. Simple boilers to install 👍🏼

@PlumbingDoctors 3 года назад

I did not know you could put the flues on straight 🤔 Ive always put them on an angle.. & Yep ive heard about cutting the back casing so you can pipe behind 👍🏻

@rayc1503 3 года назад

@@PlumbingDoctors bro look at the flue itself the exhaust plume isn't death on centre. It's towards the top of the flue. This is to account for condensate fallback. Great upload 👍🏼

@Rycka9 11 месяцев назад

Is it ok to keep the same flue from Worcester boiler for main eco?

@Fizzy01166 3 года назад

Amazing content. Really helping me out since being qualified. Can you do an in depth vid of power flushing. And keep up with the normal content. Jzk

@peterfido8735 2 года назад

Great informative video 👌 I'm looking for a 30kw combi boiler at the moment! My question is , what make and model combi would you recommend in the purchase price range of up to around £850 ?

@PlumbingDoctors 2 года назад

This boiler in 30KW

@Juandan59 2 года назад

Great vid, does the outside flue have to angle down? I get water dripping from the bottom of the boiler when it rains sometimes only when wind blows a certain way.

@PlumbingDoctors 2 года назад

Slight fall back to boiler yes

@snagright1300 3 года назад

Clean work bro even in that tight space

@PlumbingDoctors 3 года назад

Thanks bro 😎

@snagright1300 3 года назад

Plumbing Doctors will you be releasing magnacleanse video bro? Couldnt find it on your page 😅

@PlumbingDoctors 3 года назад

Check the baxi vid with magnacleanse 🙄

@snagright1300 3 года назад

Plumbing Doctors ahh sick i found it 😅 thanks bro keep up the good work helps us learn new methods of worker smarter!

@PlumbingDoctors 3 года назад

👍🏻👍🏻 more vids to come bro😎

@jazzifte Год назад

Broski what a wicked video. Ive jist had one installed and the heater symbol flashes and the pump runs constantly with no heating or water demad and advise bro

@MartyJones Год назад

Hey mate great video! I have this boiler and I’m certain the fuse has gone on the circuit (already replaced 3amp electrical) can a standard 2amp 2mm fast blow be used? Or is it a specific size for this boiler?

@PlumbingDoctors Год назад

Yes change the fast blow it may be 1amp or higher

@dinosauraccounts1411 Год назад

Excellent video. Please make a video on a full service for these eco compacts

@PlumbingDoctors Год назад

👍

@grahamwilson2748 2 года назад

Great video very informative and a great boiler I notice in the installation manual it mentions adding 300ml of water via the flue outlet is this something you do?

@PlumbingDoctors Год назад

Sometimes when i remember lol

@mihaelaghita1612 3 года назад

Hi if it's showing E110 what should I do?

@londonertiger7725 2 года назад

Good vid brother, I have this boiler for 2 years. Its been generally ok, had 1 warranty claim, slight leak above diverter valve. Some critcism, the display needs a LED light when in operation, more intuitive info on display would have been ideal (see vokera evolve ), limited controls as leave all to thermostat. Could have done with pre heat like older models, the left hand side blue lever is too stiff.

@PlumbingDoctors 2 года назад

The led is bang on - shows you what you need to know. That left lever is always stiff not sure why

@happyslapper07 3 года назад

Can't wait for this video also can you do a video on a condensate soakaway I've look on RU-vid over the Internet there is so video showing anyone fitting one thanks

@PlumbingDoctors 3 года назад

Soak aways are very easy just follow instructions on the bag and make sure you use limestones

@happyslapper07 3 года назад

@@PlumbingDoctors hi thanks for replying yeah I fitted one this week followed the instructions just wanted to make sure it was right as I've never seen anyone fitting one I did use limestone around it so am sure it will be ok. Any chance you could do video on soldering I can solder the joint I tend to over solder is the vertical joints top part of fitting is alright just the underneath one I tend to over solder as am worried there is not enough sucked up into fitting.

@PlumbingDoctors 3 года назад

Yes i will make one in the future 👍🏻 with soldering there is no shortcut to experience, the more you do the better you will get 😉

@soyebmankda8387 3 года назад

Great video needed a magna clean and shock arrestor always test the systems water before install may need flushing or cleanse

@PlumbingDoctors 3 года назад

We did flush the system and landlord did not want to pay for the shock arrestor so 🤷‍♂️

@ivecamperbuild_thomas4084 2 года назад

What could be the problem if you turn it on at the fuse spair and it doesn’t light up

@krystopcosek764 7 месяцев назад

How about the main electricity wire less than 25mm from gas pipe? ( ID?)

@imaginehomes3871 2 года назад

You can pipe upwards with the stand off bracket. Also need to pipe 28mm off the back of the boiler for anything above about 35000 btu or friction losses cause slower heating, Can come out straight into 22mm and up to 28mm with a 28mm elbow. Just run the 28mm until the rest of the system is less than 35,000 btu then drop to 22mm. The stand off bracket (if you need it) is for 22mm or 28mm pipes. On the Baxi 600/800 you need the stand off for 28mm. Most people think it's 22mm only just because that's on the back of the boiler but that's wrong. The 22mm pipe causes 99% of the restriction so 28mm relieves this and the flow rates and heat up times are massively better. Below 35000 btu it's okay for 22mm. I also use full bore rad valves (14mm internal bore that open up to 14mm)..

@PlumbingDoctors 2 года назад

Good info about the pipe sizing but very rarely do i need to use anything larger than 22mm as i work on Small - Mid size houses

@faridratni6799 3 года назад

ما شاء الله Brother excellent video one thing I don't understand why did you put drain off in flow and return because I put 22mm cap for easy powerflash in future!!! What do you think

@PlumbingDoctors 3 года назад

I put the drain off on both flow and returns to make future maintenance easier & aslo makes draining up stairs circuit easier 😉 If the system was to be powerflushed in the future they can do it from the magnetic filter elbows 👍🏻

@1981shafi 2 года назад

Hi. Great video. Can I ask what merchant you use? All the ones near me have sold out.

@PlumbingDoctors Год назад

Cov plumbing

@ivecamperbuild_thomas4084 2 года назад

Can I ask is there a glass fuse in the connector block to protect the MCB many thanks

@PlumbingDoctors 2 года назад

I believe so

@MultiOutdoorman Год назад

#3. Let's not forget to electrically isolate the mains supply. Fuse in pocket. And fill the kettle for a brew before you begin !

@PlumbingDoctors 11 месяцев назад

Come on 👍🏽

@murtazahussain4054 Год назад

Thanks for the video just a quick question 🙋‍♂️. When it came to the wiring you skipped over it real quick and didn’t show the wiring on the thermostat. If I am correct the live and neutral connect via the boiler along with the switched live and common back to the thermostat.

@PlumbingDoctors Год назад

yes thats i how do it but can be done different

@jasonoliver9549 3 года назад

Basically great video Basically nice job guys Basically

@PlumbingDoctors 3 года назад

Basically basically comment

@cathyoshea3844 2 месяца назад

Excellent video lads, well done. What about the inhibitor? I'm sure you added to the system.

@PlumbingDoctors 2 месяца назад

Absolutely

@222rimantas 8 месяцев назад

I did twice as you instructed, but the boiler did not activate for me. Cold water is running and the radiator is cold.

@DannysGandB 3 года назад

On the back of the pcb cover it tells you how long the electrical cable connections need to be cut to

@PlumbingDoctors 3 года назад

Yep your right but i never use it

@bobbys9252 2 года назад

thanks for the video ,I've got one question which i saw 2 other people also ask this question but no replay given exactly about this .The question is 2 days ago someone install this boiler for me but it is always humming during day and night even thought not using hot water or central heating but still humming all the time, so could you please tell me and other readers what is that humming sound coming out of boiler? Is it normal or something need to done? Thanks

@PlumbingDoctors 2 года назад

No idea best to call installer back out or call Baxi to come and take a look

@macpatel7810 3 года назад

Hi. Great video again. Looks like a nice job.. Just a small question.. did you power flush the system? Is it necessary on a new boiler install or is there no need ? Is it required for the manufacturers warranty? Thanks in advance.

@PlumbingDoctors 3 года назад

Yep we flush all systems when fitting a new boiler and yes it's required by all manufacturers (they want system water to be clean) 👍🏻

@macpatel7810 3 года назад

@@PlumbingDoctors ok great.. just wondered as I did not notice you doing it on this one. I must have missed you mentioning it if you did. Do you use a magna cleanse through the filter connections with boiler running or a regular power flush machine? Cheers

@PlumbingDoctors 3 года назад

Nope i did not mention it in the video either and it depends on how dirty the system is but usually i use the Magnacleanse Flush 👍🏻unless system is very old and dirty.

@macpatel7810 3 года назад

@@PlumbingDoctors makes good sense. Thanks

@mchagh9594 2 года назад

Great video . I have the same one . But i have no idea how to switch the boiler off . I only put in on min . But it seems to me that the boiler is always on

@PlumbingDoctors 2 года назад

You can only switch these off via the fuse spur but they use no gas if there is no demand for heating or hot water so no need really to switch off

@mchagh9594 2 года назад

@@PlumbingDoctors thank you so much for getting back to me . I was concerned as the fan seems to be working all day and night and i was thinking the gas is been consumed.

@ashrafpatel3191 2 года назад

My new main boiler 133 error how to solve

@lunedog794 Год назад

You know the heating mode symbol (radiator)? Is it normal for it to be flashing?

@PlumbingDoctors Год назад

When the heating is on yes

@Hussain-ch3pr Год назад

Salaam bro, when I turn the rad temp down, the lowest it goes to is 25 degrees and not zero. Can this be rectified?

@PlumbingDoctors Год назад

Walaykum aslaam wa rahmaulahi wa barakathu - nah you cant just turn off from room stat

@Telstar_1 6 месяцев назад

Does this boiler have a pre-heat for hot water setting that keeps the boiler on intermittently? If so, where is this function turned on/off? Thanks.

@PlumbingDoctors 6 месяцев назад

Nope it doesn’t

@Shah-uw7pc 3 года назад

How did you manage to set the minimum heating setting to '00'. My own only allows it to go down to '25'. Is there a setting on the PCB?

@PlumbingDoctors 3 года назад

Nope just turn the dial to min

@2009bager 10 месяцев назад

Does the condensing pipe outside required do isolation?

@PlumbingDoctors 10 месяцев назад

Nope

@ivecamperbuild_thomas4084 2 года назад

What if it dose not light up when your turn it on

@koskesh360 2 года назад

Hi mate, I recently just had this boiler fitted. it is working fine, but how does the warranty work? is it with my local plumber who installed it, or the the company Main ? thanks.

@PlumbingDoctors 2 года назад

The warranty is with Baxi. Any issues give Baxi a call directly but make sure you have all paperwork and it gets serviced every year

@paulstevens5329 3 года назад

I find the rear nut on the gas connection always slightly leaks for some reason .

@PlumbingDoctors 3 года назад

Ive never had that issue but a bit of jointing compound should sort that ;)

@reliabill87 3 года назад

Brilliant install but does the flue not need to be screwed in from both sides of the flue elbow?

@PlumbingDoctors 3 года назад

👍🏻 Yes it does but i did not record it..

@reliabill87 3 года назад

Ah that's awesome, usually they are quite awkward, would of been good to see if you had any techniques.

@PlumbingDoctors 3 года назад

Check the baxi 800 vid as i show it in that video.. Use the right screw head and also its easier if you drill a pilot hole with a metal bit first 👍🏻

@alistonpereira3493 3 года назад

What's the best setting for hot water and radiatiors.. thanks

@PlumbingDoctors 3 года назад

Depends on size of rads but i usually set: HW: 50 CH: 65

@TheDickPuller 3 года назад

Great video mate, but you shouldn’t have 21.5mm Condy pipe going through the external wall. 40mm is much better & less likely to freeze👍

@PlumbingDoctors 3 года назад

Yep your right buddy 👍🏻

@boigoe 5 месяцев назад

Ho brother at the beginning of the video...the installation pipe, nuts and filling loop kit can all that be bought separately as a kit

@PlumbingDoctors 4 месяца назад

Yes it can

@boigoe 4 месяца назад

@@PlumbingDoctors wher from and how much roughly

@davidhenderson9893 3 года назад

Great video, Is the flue connection on top of the boiler and the flue connection itself out the wall just a push-fit fitting(s)? No sealant needed?

@PlumbingDoctors 3 года назад

Yep just push fit just lube the seals up before pushing it together

@davidhenderson9893 3 года назад

@@PlumbingDoctors Can you do a video on the procedure you go through when isolating the gas to a property? Ie. As in more than just turning the lever valve off, or do you just leave it at that? Love your videos 👍

@PlumbingDoctors 3 года назад

You should carry out a tightness test before turning the gas off

@davidhenderson9893 3 года назад

@@PlumbingDoctors If you could do a video of that, that would be great, Ps. Qualified plumber, not just some bloke chancing my arm ha 👍

@PlumbingDoctors 3 года назад

Are you Gas Safe?

@earthling2022 2 года назад

At 18:37 , the double spin, I spun the tap one and got an error code ( which was better than nothing at that stage - as the boiler wouldn’t function!) Double spun the radiator one and it all started working ! thanks for your video 👍🏽

@PlumbingDoctors 2 года назад

😉

@kuldhup4746 Год назад

At 18:37 , the double spin, I spun the tap one and got an error code ( which was better than nothing at that stage - as the boiler wouldn’t function!)

@kuldhup4746 Год назад

yes

@WeShowMemes537 20 дней назад

Have u put any screw to the flue elbow?

@PlumbingDoctors 14 дней назад

Yea

@HelpUsHelpU 3 года назад

Hi brother. I have this boiler fitted new but it feels like it’s always on. It’s always humming and radiators get warm when someone is having a bath. I don’t have a themostat on it. Is there a way to turn it off

@PlumbingDoctors 3 года назад

Remove the yellow link

@HelpUsHelpU 3 года назад

@@PlumbingDoctors thanks for the reply. I’m really sorry but what’s the yellow link

@juberkjahmed2508 Год назад

Hi, do you have to put 300ml water inside the flue

@PlumbingDoctors Год назад

I believe baxi want you to do it yes

@Shah-uw7pc 3 года назад

Was that a volt free connection for the thermostat?

@PlumbingDoctors 3 года назад

At the boiler its 230V

@happyslapper07 3 года назад

Great video thanks for showing install could you show a little more detail when you measure the flue I know its from the outside wall then is it to the front edge of the flue the black turret bit. Also there is a regulation regarding the condensate discharge to outside needs to be lagged using waterproof lagging there is a kit you can buy called condensate pro.

@PlumbingDoctors 3 года назад

Yep im aware of that thanks 👍🏻

@happyslapper07 3 года назад

@@PlumbingDoctors also you need an air break in the condensate pipe as its going into a stack pipe to prevent back feed into boiler. The fall is not correct as there is a flat spot where water could freeze.

@PlumbingDoctors 3 года назад

I'll have a look into the air break but its never froze even with the old boiler so 🤷

@joncoke8208 3 года назад

@@happyslapper07 you only need an air break if going into a down pipe 🤗

@happyslapper07 3 года назад

@@joncoke8208 good practice to put air break in as I've been to boiler breakdown where stack pipe blocked and backed into boiler full of piss and shit so I would put air break on stack pipe.

@parmindersingh4641 Год назад

👍

@PlumbingDoctors Год назад

👍👍

@waseemkhaliq933 3 года назад

Brother what fault codes did it have .also what do you do with this when you take it out I could do with this for spares for my vaillant 😀

@PlumbingDoctors 3 года назад

I can't remember as the job was done in December🙄 I strip all parts from my old boilers and scrap everything.. i don't ever use 2nd hand parts when repairing boilers 👍🏻 but i do keep some screws and other bits for stock

@stevefletcher8157 Год назад

I'm having one of these installed for £1.800. Straight swap for ideal logic . Is £1800 a reasonable price?

@PlumbingDoctors Год назад

yes

@Falco45able 3 года назад

👍 😉....

@willpierce2171 3 года назад

Can you pipe up the back on these?

@PlumbingDoctors 3 года назад

If you remove the plate at the back you can but i went on a Baxi Training course last week and asked this question to the tutor and said its not allowed and can invalidate warranty But before that my local rep told me it was fine to remove the plate... 😕

@UmarKhan-ww8jl 3 года назад

Brother I need to install a new boiler in London please give me your details ?

@PlumbingDoctors 3 года назад

I don't travel that far sorry bro

@kamranraja9197 3 года назад

Good video please share link in when installing a vaillant boiler

@PlumbingDoctors 3 года назад

Subscribe to channel and you will see it when it gets dropped

@222rimantas Год назад

How to connect the Eco Compact boiler when the refill is over ?

@PlumbingDoctors Год назад

Im not sure what you mean sorry brother

@222rimantas Год назад

@@PlumbingDoctors I top up everything, everything is fine, but the boiler does not turn on, what should I press? What is the buttons sequence?

@bobgibb2781 2 года назад

I had one installed today . Heating working fine , hot water fine . Switched it off at the socket . Switched it back on and it's completely dead . Nothing on the display .I've held the reset button down for various lengths of time , nothing . What have I done wrong ?

@PlumbingDoctors 2 года назад

Check to see if you have power at board or at socket