Make a Folding Extension Table for Sailrite Leatherwork Sewing Machine add Space to this Small Table 

Thanks!

That's great! Lots of applications for a folding table add-on. Best to you.

Thank you! It's pretty easy to do if you have some basic woodworking tools, or at least know someone who does. Best

Thanks Larry!

I'm not sure what the factory used for a topcoat. I just used MDF with clear satin lacquer and it matched well. Thanks!

Ok sounds like you've had great luck with elevator bolts. Thanks for the tip.

I made a portable sewing machine table. For my sailrite LSZ-1 ultra feed!

The bolts are 1/4-20”x 2.5;

The nuts are locking with nylon inserts; the hammer pushes the bolts into the hole and locks them in place!

Thanks! You won't have any trouble making this extension table.

Thanks. The tool pouch was a tool belt accessory, available at big box stores etc.

Probably 50 pounds or so. For me the folding table is just to support material or leather. Thanks.

It's just common folding shelf brackets and basic hardware store fasteners. Select the folding shelf brackets based on how big you want the extension table to be. Even a small extension table can be quite useful. Sailrite was considering making one, so keep an eye on their site. Best

The shelf bracket is 14" on the long horizontal leg, and 7.5" on the short vertical leg. The table is 15" long, and same width as the factory table. The vertical support board is 8.5" tall, and 3/4" narrower than the factory table. Hope this helps.

@@TheThoughtfulWoodworker thank you

Hi Liz, I'm not in the market to sell tables, but keep an eye on the Sailrite website. There were some murmurs they might start making them. Another option would be to get a full sized industrial sewing table, and make an insert for the Sailrite. Best of luck with it.

@@TheThoughtfulWoodworker Thank you for your response. I will keep an eye out on the Sailrite website. 😊