Make Adjustable Sawhorses [+ With PLANS]

Подписаться 946 тыс.

Просмотров 135 тыс.

50% 1

Adjustable Sawhorse Plans jonpeters.com/product/adjusta...
Shop My Artwork jonpeters.com/my-artwork/
All My Woodworking Plans jonpeters.com/
These adjustable Sawhorses are a simple, yet affordable project that you can build in just a few hours, and I know that they will come in handy around your shop or on the job site for years to come.
A note about building this project, if you are going to build a pair of the these adjustable sawhorses, just make sure to double the cut list before you start… and always, thanks for watching, Jon
Power Pro screws used in this project.
10x2-1/2” PowerPro Exterior Wood screws - www.lowes.com/pd/Power-Pro-10...
10 x 3” PowerPro Exterior Wood Screws - www.lowes.com/pd/Power-Pro-10...
8 x 1-3/4” PowerPro Cabinet Screws - www.lowes.com/pd/Power-Pro-8-...
Design Plans: jonpeters.com/design-plans/
My Tool Store: imp.i284638.net/Jon-Peters-Acm...
Merchandise: jonpeters.com/store/
Instagram: / jonpeters_
Facebook: / 312021729836
Website: jonpeters.com/

Хобби

Опубликовано:

4 дек 2021

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 99

@bakedbeings 2 года назад

The adjustable height would help a lot in my garage, they can double as out feed/side support for the tablesaw 👌

@philshock3805 2 года назад

Looks like a great design if you have a need for adjustable heights! Simple and effective. With some additional thought and planning, you could even make the heights correspond to various machinery for indeed/outfeed support! My only criticism is footprint they'd take up when not in use. In that regard, nothing I've found works better than the 2 sets of folding plastic sawhorses I bought 30 some years ago. All 4 of them hang neatly on the wall on a bracket and out of the way. They're good quality, hold a lot of weight and are easy to carry. These look really good though, Jon!

@jscook54 2 года назад

I love how beautiful even your shop projects are. Your description of what your are doing is wonderful and so helpful to someone learning this craft.

@Hansaman58 2 месяца назад

I’m in the process of making a pair of these. Not as perfect as yours but sufficient for my needs.

@makermark67 2 года назад

Great design, simple build. Always enjoy and appreciate your direct, no fluff presentation on your videos. Really appreciate the free plans. Thanks for this one!

@samspade4634 2 года назад

Thank you Jon for sharing! I will add a partial plywood sheet and make a comfortable / adjustable work station for my scroll saw to get the most usable height for standing or sitting. I really enjoy your style of teaching and clear explanations - over all a great video channel.

@johnmcdonald9977 2 года назад

As a novice woodworker this looks to be a perfect project for re cycling pallets, which I have free access to. Very sturdy, and the adjustable height is great for me and my Gardening Projects

@mikesgarage5066 2 года назад

Very simple build that can be incredibly helpful. Love it!

@denisruiz1068 2 года назад

Greetings from Nicaragua, Mister Peters.

@umakemesick2 2 года назад

Looks like a solid pair of saw horses. Looking forward to building them myself, thanks!

@thedudetoo1964 Год назад

Hey thanks for a truly ingenious sawhorse design. The only way I deviated from the plans was to use 5/8" diameter hitch pins instead of anchor bolts. They came with retainer clips. So if I am doing something with a lot of vibration they're unlikely to slip out. I also love how sturdy they are.

@tonyfagan7863 3 месяца назад

Nice job. If more adjustability is needed, use 2x6 verticals with 2 ( or even 3) columns of holes offset by 1" (or whatever) so they can be staggered.

@kellytoffey354 Год назад

Awesome. Can’t wait to make these. Thank you for sharing this terrific project.

@MCsCreations 2 года назад

Fantastic work, Jon! Thanks a lot for all the tips! 😃 I definitely need some of those!!! Stay safe there with your family! 🖖😊

@alanmagalhaes2008 2 года назад

You can position the lower cross braces to be halfway up the holes. So there would be adjustments every 1 inch instead of 2 inches

@oluwatoyinabiola7639 Год назад

Your teaching is wonderful thanks for helping in my learning

@sapelesteve 2 года назад

Terrific build Jon! Those look like very heavy duty sawhorses for sure. I would build them with a detachable base for easier transport. Thanks for the plans! 👍😉👏

@prathap.t8841 2 года назад

Very nice and good make, all houses need like this one i hope for all emergency needs. You are nice.

@ddutton0 2 года назад

These are super nice! Definitely needs a set

@jefferyfowler5080 10 месяцев назад

I am in the process of making more of these adjustable sawhorses. It is not as easy as it looks. And I am a fair to middlin woodworker. I've got the first one about three-quarters done. The quality is so low I would be embarrassed to even attempt to sell it. No fault except mine. I will keep at it, though.

@pinnacleservices6671 2 года назад

Another great video. Thank you for providing this one. It is definitely something I need.

@fcsturningwoodcraft2933 2 года назад

Perfect set for my shop. Thanks for the plans Cheers

@alfonsocastaneda3830 3 месяца назад

Muy buen trabajo me gusta

@markfishburn8284 2 года назад

They look to be very useful. Thank you for sharing your video.

@FyrFytr998 2 года назад

One dove tail slot across the top offset from the connecting screws, and you have a nice little set up for Micro Jig clamps.

@mackymalinao1856 2 года назад

Great design..so satisfying to watch sir!!!

@manic65cvn 2 года назад

Im going to making a couple of these over my xmas break. Great design and as mentioned Im going to make the adjustments correspond at certain heights to suit my saws etc.

@gregmize01 2 года назад

Cool design and great presentation!

@andrewbrown8148 2 года назад

Very nice, Jon~! I've been looking for a good sawhorse design to replace the plastic A-frame ones that I've been using for years. I think this is the ticket. Thanks much for the free plans~!

@danyodice1048 2 года назад

Cool build Jon. Thanks for the great info...🤘🤘🤘

@edmc755 2 года назад

VERY NICE BUILT< LOOKS SO EASY WHEN YOU DO IT

@wolfman75 2 года назад

Cool!!! Nice set!!! Thanks Jon!!!! 👍😎

@mweber555 2 года назад

Great video, thanks for the plans

@IEnjoyCreatingVideos 2 года назад

Great work on the saw houses Jon! Thanks for sharing them with us!💖👍😎JP

@JonPetersArtHome 2 года назад

Thanks JP!

@IEnjoyCreatingVideos 2 года назад

Your very welcome Jon! Have a wonderful weekend!😎

@jefferyfowler5080 10 месяцев назад

I tried to get away with using cedar pickets for all the braces. After all, this first one I'm making is a test. I wholeheartedly advise against using cedar. It's not nearly strong enough. I also advise making a jig for the foot leg assembly. I haven't made the part that is made last. But based on what I've done so far, I would recommend making another jig to keep that part square. Be sure to follow Jon's instructions how to keep the feet identical. It's very important.

@DavidBishopinc 2 года назад

Another great build.

@jackskelton6773 2 года назад

Thanks so much neat idea. I will make them for sure👍👍👍👍👍👍

@okiwatashi2349 8 месяцев назад

Great video Jon.😊

@littlehousewoodworking5292 2 года назад

Love this idea. Thinking I may use this for an adjustable height assembly table. Thought about buying a set of adjustable height office-desk table legs, but this is far cheaper.

@cbcisneros 2 года назад

This is great, thanks for the video.

@Luqman899 2 года назад

nice build! If i were to change one thing I'd add a holder for the adjustment pins, mainly coz I'd probably misplace them

@kevinodonnell9423 2 года назад

Great idea. You could add some rare earth magnets, or even drill a hole into the foot to accept the pin.

@521farmer 2 года назад

!! Wow Ya Did it And it's easy to build for a Mecnec Like Me So Glad I Watched this Goin to Be Handy to hav Thanks Again for Sharin Your Project Keep them Comin

@orangeduc3129 6 месяцев назад

Please do you have a video on bunker bed, wardrobe or rotating shoe shelves please thanks

@WoodenCreationz Год назад

These are really cool Jon! I 100% could use these in my shop.. I may have to build some! Great job sir! Brian

@JonPetersArtHome Год назад

Thanks Brother!

@orangeduc3129 6 месяцев назад

Good job please thanks greetings from Ghana

@rclayton80 2 года назад

It looks like depending on where you insert the pin (top rail vs bottom) you can get adjustability finer then the two inch spacing of the holes in the riser.

@kenc2257 2 года назад

Very nice--great design! [though I personally rarely have needed to use supports that adjust vertically]

@williamellis8993 2 года назад

Those look great, Jon. Now I don't have an excuse not to build a set. Thanks for the video and the plans. Bill

@chaplainand1 2 года назад

Nice build. Thanks. Many opportunities for the builder to make custom modifications to meet their shop's needs. This would make an excellent starter project for new ww students. Also, all the work could be done w basic hand tools. Thanks.

@garagefixer3777 2 года назад

thank you

@GeeDeeBird 5 месяцев назад

Thanks for sharing. I couldn't make it what kind of drill bit you used, and i didn't find it on your tool page. Could you please enlighten me?

@azharc123 Год назад

Fantastic

@warrenwright6 2 года назад

Really like that sawhorse design.thanks for the idea.ps that table saw is a thing of beauty.we don't get sawstops this side of the ocean. No fair

@bsdbryn 2 года назад

Beautiful! Might try out a standing deal concept with this. Are you still happy with your Montana counter sink? Was looking at buying one for Christmas.

@jefferyfowler5080 10 месяцев назад

Jon, you may want to erase this comment. I find that the leg/foot assembly, as designed, is too hard for me to do, accurately, since I don't own a finish nailer. What I'm going to do with the next one will be to use a one-piece foot running horizontally. The triangle braces will be approximately 14 inches tall and 16 inches wide. The feet will have a cutout on the bottom 3in in from both ends, about 11/2 deep. I finished my first one and I had about five and a half hours invested in making just that one. I had it in my head that it was only going to take me about maybe an hour and a half to make one. You make it look real easy. And you did a great job.

@jefferyfowler5080 10 месяцев назад

I am kind of weak on being able to upload from my photos, but if I can figure it out I'll send you one photo.

@johnwinn4213 2 года назад

Jon just applied for the saw horse plans If you don`t mind I am making a small design change I am going to dado a one inch wide dove tail channel with top opening being slightly less than three quarters so a dowel will be just above the surface and work like a roller on an out feed

@rickculpepper709 2 года назад

Nut on other end…looks great

@JonPetersArtHome 2 года назад

Hi Everyone, this is the link to the plans. jonpeters.com/shop/adjustable-sawhorses-plans/ don't forget to double the cut list to make two horses. Thanks for watching, Jon

@ciptajatiabadichannel81 2 года назад

I like your video projects... 👍🤝🤝🔔🔔🙏

@henryfreitas597 8 месяцев назад

Muito bom, preciso um cavalete assim.

@juanantoniozamoralopez9823 2 года назад

Hello! Thank you for sharing this valuable carpenty information, very interesing; I have a question about your saw table because I see that it is large and need one like that, can you please share the brand and line of that team? Thank yuo vey much in advance, greetings.

@billybeavers6203 Год назад

Nice I guess if it fits your needs but alot of extra material making them heavier and they dont fold up for storage..

@andywfc1 Год назад

nice job but ...how can anything be cut accurately marking with a soft pencil as thick as a crayon ???

@johnsrabe 2 года назад

No music! No “guys!” No “smash the subscribe button!” Plus a good script, simple no-fuss production, and good plans! Huzzah! (What’s the white device on the table saw fence?)

@JonPetersArtHome 2 года назад

Remote control for Dust collection

@johnsrabe 2 года назад

@@JonPetersArtHomeah. Thought maybe it was a camera remote. Cheers.

@jefferyfowler5080 11 месяцев назад

I like it. Am I allowed to make them and sell them?

@hpneeder 2 года назад

Thank you for not spreading the glue with your finger. I find evenly placed glue unnecessary.

@pemtax557 2 года назад

Hi Jon, I've been seeking a sawhorse design that would lend itself to outfeed table utility and by goodness, I think I've found my victim. I can see that you have had a lot of takers on this concept, but finding a decent outfeed support for my table saw would be the bomb. Due to its inherent abilty to free stand, provide a wide base of stability as well as a decent amount of 35"+ stabilty, why not? I plan to play around with the foundation your design provides and if it works out, I'll provide you with some photos of my Frankenstein sawhorse creation. Ahhh-Haa-Haa-Haa! Damn, I think my attempt at an evil laugh just caused my autocorrect to blow up). Cheers ... Dave

@JonPetersArtHome 2 года назад

Awesome Dave!👍

@AngelHdzMultimedia 8 месяцев назад

Can this be made foldable?

@ciptajatiabadichannel81 2 года назад

Amazing...👍👍 I like your skill, inspiring for me?

@Bdbrad71 2 года назад

Are the plans for these online and free?

@jefferyfowler5080 10 месяцев назад

I don't know if it's true, but I heard that it put Mr. Bartholomew, the inventor, into a psychotherapy class for recovery!

@dclinks Год назад

I wish the plans were free :). But I guess I can watch the video. Few times and get all the info :)

@JonPetersArtHome Год назад

Or you could support someone that creates consistent useful content… Or maybe say thank you thank you for the clear helpful video.

@cathysoldan6540 Год назад

This is Exactly what I need for my table saw and a planer, of course at different heights. I would appreciate a link to your plans, and I'm willing to pay you for them. I did click on your link and got a suspended page notice. I really appreciate your designs and your sharing of those designs.

@JonPetersArtHome Год назад

Thanks, my site was down but it’s back up now

@glennroselli6780 Год назад

What make chop saw are you using ?

@JonPetersArtHome Год назад

Kapex festool

@gabrielmendozacastillo4305 2 года назад

HOLA, REALMENTE LOS PLANOS NO SON GRATIS

@user-ui6fq3tk4j 2 года назад

😍😍😍👏👏👏🤝🤝🤝

@phillymike4767 Год назад

Tried to purchase your plans for the adjustable saw horse. Will not accept my password. don't want pay pal, just want pay by credit card. I will just watch video a few times and take notes. why do you make so difficult to buy your product.

@jefferyfowler5080 Год назад

Norm said for me to tell you to wear safety glasses.

@JonPetersArtHome Год назад

👍

@jefferyfowler5080 Год назад

@@JonPetersArtHome your adjustable sawhorse video is inspiring. I was thinking about how to make a pair that incorporates either a bottle jack or scissors jack. I'm guessing putting a two-by-four or 2 x 6 across the top braces?

@moneymakingmikeg.9555 2 года назад

What a complete waste of time!!! My $20 plastic Harbor Freight ones work just as well!!! I can picture you chuckling while reading this... I enjoy seeing everyone customize their own saw horses differently. Well done Bud. Hoping all is well, Dirty Jersey out!!

@billnelson3605 Год назад

I'm sure your comment about the Harbor Freight plastic horses was made in jest. Those are the reason I'm looking at plans for saw horses. I'm working on a fairly heavy platform for a washer and dryer, and can barely manage the weight. To make it easier to unload the materials to build it, I decided to cut the plywood to size in my 16' X 7' trailer, using the HF plastic horses. With my wife's help, we managed to get the plywood on the horses, but one of the links that holds the legs in place separated while we were cutting and the last couple of inches of the kerf broke. Not a happy camper! They're so lightweight that it's hard to put something fairly heavy on them without having them flip over. I do have some HF horses with metal legs and wooden top that work pretty well, but they're in an outbuilding holding up another project.

@frederickstehle11 Месяц назад

PLANS LINK IS BAD. So tired of people baiting you to click a link to a video that no longer nhas supporting documentation.

@JonPetersArtHome Месяц назад

Just tried it and it worked for me

@frederickstehle11 Месяц назад

Well good but doesn't work for me. I get a "No Results Found The page you requested could not be found. Try refining your search, or use the navigation above to locate the post."

@frederickstehle11 Месяц назад

Ah. Found the link. There are two links that come up for me. Sorry for negative post. Just confused by having two links that appeared with the same name.

@JonPetersArtHome Месяц назад

@@frederickstehle11 no problem I’ll take another look and get rid of the broken link