Very few modifications will give you the immediate Seat-Of-The-Pants results that re-curving your distributor will. Here's everything you need to know about the process and how to apply this voodoo to your own engine.
In the old days we had 110 Octane gas at the pump. Now it is 92 . Quick advance curves went out when the 110 Octane went away. Everyone recurved the distributor for racing in the old days. Locking the advance is for track only . It beats out the bearings. Dual point distributor is to increase spark energy by increasing coil dwell,not to alter timing. Many people did weird things, Dirt track racers being the weirdest. Are you an uneducated farmer, Tony, running Sprint cars? CAT gives this a big yawn. Remember if it doesn't start put in an extra battery for 24 volts and use a high torque starter. Don't think that over advanced timing is the problem.
When I was a teenager, we would have killed to be able to get info like this on our phone at anytime and from anywhere and FREE. This is the good stuff that makes all the garbage on RU-vid worth putting up with.
I used a set of white Barbie tires for my build. Hadda paint the Barbie lettering white to hide it 😆 It's just an old blue banana seat 20" bike with ape hangers and extended forks I painted red. I used 16" wheels on it with the white Barbie tires for easier peddling. I call it Cap'n Merica. Maybe I should challenge him to a race 🤔 😆😆
I just tried to watch videos about ignition timing and vacuum advance on two other channels and I had to tune out, because they were too meandering and long-winded. Thanks for continuing to keep the main thing the main thing!
We're not a lot of stuff to so what are you doing now too bad you're too dumb to understand secrets of life repeat greater than what you are you think you are gods and you are that's what's happening right now so goodbye on the secrets of speed hahaha it's already been posted but you will never know the secrets
Man, my dad had 2 heart attacks and a stroke back to back and can't remember or comprehend his own brain in these types of situations anymore. The way you explained this refreshed my mind. He explained it to me as a 14 year old and why my 305 I put in my first car was slouchy out of the hole. After a week with a vaccum Guage and twisting the distributor, tuning a quadrajet, another week of curving the vaccum advance and modulator valve on the Trans, lighter weights and springs, hotter plugs, hotter wires. Etc. I had a cammed 305/with th350 3sp in a gbody with a 3:73 gear that would DOG most people's BBC's I know. I miss my dad having a sharp mind, he taught me so much....never take it for granted unc, teach everyone you can! keep up the good work, I love the show. I always come here for refreshment of the automotive mind. I can't remember shit, I smoke alot of pot smh
This guy is very good, I’m old guy old school you have good channel Sir helping me to see things I’d not worked on for years. I’m old guy retired Military USAF disabled ptsd. I’ve bought an old 1963 Chevy C-10 with a 383 Stroker. I’m working on it but my brain doesn’t do for me like the old days of wrench turning. I was Master Mechnic in military working on jet engines. My head worked great then, now it takes more time but I get there. I’m doing the drivers side cylinder head install today, did the passenger side the other day. So, love the timing tutorial and love the ones for carburetor initial adjustment and more… You Rock Sir, keep posting I need more tech which I’m say, rusty on, ha ha.. Thank you Sir!
In those days our "dyno" was a straight stretch of road with marks on the pavement and a stopwatch. Timing lights, curve kits, jets, metering rods, power piston springs, power valves, squirters and pump cams are part of a foreign language to most people now. I bet the young ones now can't imagine making the effort!
I’ve been tinkering with my Mopar for most of my life at this point and I still learn (or re-learn) something from Uncle Tony every time I watch. Very grateful for this channel!!
This is the Best channel I have subscribed to on youtube. I've actually learned quite a bit of useful tips and tricks that only someone that has tried and tested these in the real world would know. Thanks uncle Tony.
What I've did for my mild street slant6, removed heavy spring and put a light one in (from summit.. cheap), kept medium stock. Welded Advance plate it gives 16.. and set base timing at 12, and did an GM Hei chip. she's SOO much more fun to drive..this was as much as an upgrade as going from a single carb to dual carbs! Abselutly worth the 60 Euros!! Do it!
@@williamstamper442 most fun is that the Slant , is easily made quite powerful for here.. Nothing has torque down low. Most American iron here has a (bad/smogged or just bad build) v8 though!
If your budget build guru doesn't give you advice from the seat of a kids Cinderella bicycle, your ride is gonna be trash 🤣 another great one brother. UTG all the way!!
My favorite tweak to my Camaro back in the day was tuning the distributor. Amazing how many people go tweaking their cars and looking for all the horsepower they can get, only to overlook the distributor. That immediate snap of the throttle is simply the best.
Not the only reason. My street Camaro, I added a bump start right onto my fire wall near the hood hinge. Can't really see it. Use it to bump over the engine for multiple reasons. I used to work at a marina fixing boats. We had a sort of test circuit with a starter bump switch on it. Hook it to power and the other lead goes to the starter, had another lead going to the ignition. With that wire harness thingy, you can easily steal any old boats in less than 10 seconds lol. My cousin worked at that marina before me and our boss needed to do repo's on boats for whatever reason. It came in handy lol.
I had to come back and watch this video second time. It reminded me of when my grandfather set me on the fender of his 76 Granada and started teaching me about distributors and timing. Thank you very much for the nostalgia Uncle Tony.
Your videos are from a point of great knowledge, and although I've yet to need any of the information, I keep watching. Please tell the puppydogs I love them.
Really good info for old school tuning. I remember my buddy getting a hot Mallory distributor used from a local racer thinking it was going to give him more power, his car suffered in performance after he installed it and he pulled it out and gave it to me. I went in and replaced the weights and springs and it ran great.
This channel has helped me more with my Mopar than any other channel. I have 1950 with a 318 in it with an HEI distributor and just don't have any acceleration until I watched a few of your videos and you helped me figure it out.
This guy is so assured of his manhood that he presents the entire video from a girls' bike! This is good information for those that are into hot rodding!
Thanks uncle Tony l have to admit when I first opened your video l thought shit lve watching Easy Rider movie but then noticed you on the bike great explanation on the working on internals of the distributor l look forward to seeing your videos every day regards Anthony from down under ps say hi to Uncle Kathy
Another great one, U.T. When talk about recurving a distributor most people look at me like I'm from another planet. I STILL had a distributor machine in the early 2000s and did recurves for customers with older cars on a fairly regular basis.
Well.......the info was way above my head. I’m not at that level yet. But I’m paying attention to every video you make. Your a gold mine of information. I really appreciate you taking the time to share all these tips and knowledge. Your much appreciated. Thank you 👍🏻👍🏻👍🏻👍🏻🙏🏼
Wow your videos are so good. Ive thought about using lighter springs for low end advance and a harder one for high rev advance (more CR and cam). Keep up the work. Really like your Channel more and more!
Ridiculously informative, it's a lost art doing this stuff. I love it and learned alot working on old Jeeps and cars alot of guys have no idea how to do anything with this stuff.
Videos are 10x better. His explanations are real world and easily understood. Comments and questions are invaluable and usually answered. A book...? Not nearly as good.
@@hotrodray6802 Books on the basics are a great learning tool and should not be ignored. Why wait for an explanation to be spoon fed to you when you can have a reference on hand to answer your questions? It's by far a far more concentrated form of knowledge.
Cool! I’ve been messing and trying the “ most initial lead, with reducing the total timing “ for years. Thanks for the insight! Can’t wait for next summer to experiment
Thanks uncle Tony for the once over. Much appreciated.and I much appreciate the fact your on a pink trike.. because apparently that's the comment section. And besides.. it shows your not afraid of it. And keeping the instructions simple and easy to follow.. well done man
When I found Uncle Tony on RU-vid I knew it was a gold mine of info and cool stories. UT wrote the best articles in car magazines decades ago ! 👍🤩 Happy Independence Day to UTG and all family ! 💥
this is rock solid as to how I remember learning about this stuff. its good to see a knowledgable guy giving advice on here. these young kids have no idea what is going on under the hood or why 99% the time. the old school made the new school and guys like this dont just have knowledge they have wisdom. nobody knows it all if ya wanna be fast ya gotta be able to listen. this video real gem. like he said take the knowledge and apply it to your situation
I am not sure what exactly I am supposed to learn on this channel but it is truly entertaining. It's like my uncle has his own youtube channel and he regurgitates stuff he heard back in the 70's
Legendary stuff. Thanks for preserving and sharing your knowledge. All of these wonderful things that are what wrenching and racing are all about will be lost one day if guys like you don't!!
When running dual points, with two settings, you have to use a relay or 3-way switch. I did a 69 RS Camero for my racing buddy, but used a micro switch on the throttle. So just off idle it would jump to full advance side using a relay & this switch. Easy and nothing to mess with or remember with the light turns green! DK, ASE master since 1978.
Great info as always!!! Never had a dual-point, but toggling between the two is sooo clever!! Thats the granddaddy of todays ignition map swaps (but without mouse clicks)!!!!
That bit about starting the engine when hot with a lot of initial timing will be very useful. I have a 69 road runner with a 383 that has a Comp XE275HL-10 cam that likes a lot of initial timing. I run 36 degrees at 2400 rpm with no vacuum advance and it is a beast to start when warm. I am going to try the 3-4 pumps of the gas and holding the throttle open to see how that works because it hesitates to start with that big hard hesitation/kick. Good stuff Tony!
Man I raced circle track for almost 15 years and the guy we got our distributors from always said to get the engine spinning before hitting the ignition switch, but I never knew why. We ran them locked out at 36°. Thanks Uncle T!!!
You remind me so much of my dad before he passed its unreal. He was just a redhead version. Mopar or nothing. I might have a manky old ford. Ty for the tip on my boiling fuel in the bowl btw. But you sir have alot of amazing knowledge that can be applied to anything... I should send you my dead ford 400m so you can see their fatal bottom end oiling issues first hand and give even more knowledge
I learned these tricks back in the 70s from PHR magazine's Monza project. I had 18 deg. initial, 10 mechanical and 8 vacuum with a very built 331 Chevy, (4 bolt 350 block built as large journal 327, .030 over) dual 650 Holleys on a tunnel ram, and a full manual turbo 350 in a 76 Sunbird. I had a switch on the dash to the Accel super coil and flipped it after she got rotating. It was in a 1976 Pontiac Sunbird Pontiac version of Monza town coupe) . It would lift the front wheels off the ground with no problem. The only problem was that the unibody car built without even subframes became a flexible-flyer in a short time. Cracked spot welds, stress tear on rh front fender. and had to be sitting level for the doors to close. A lot of fun while it lasted.
Yep...Ignition timing is a science in itself...Took me quite a while to grasp exactly why with RPM's and fuel grades and compression how it all makes a difference but nobody mentions the fuel burn(Spark to explosion) time of the fuel grades and auto ignition...Pump gas thru to Methanol or e85...Nitro is another game as you well know...Just thought I'd throw that in...Love the show Tony.
One of you best videos yet..No kidding and then a big thank you for not talking about the rubber hose to stop point bounce... yes I tried it. ,, Melted the hose pieces . Shut down the engine.
Hey uncle Tony's Garage I Really appreciate yr patience and Educational thoughts . This world and time's we live in . I need yr knowledgeable blessing too Reach around the world, for the next generation of god's children. It's time to find A protoge . To carry the torch. Yr vernacular speech is so clearly understood. Thank you. I want people to understand you are a Righteous soul and we blessed with yr caring, loving Nature. Teach this to All. Thank you so much strength and knowledgeable tools for life Energies. 👍
Drops them into 'good' distributor bin.. couple old 009 Bosh relevant tricks in the video. Very good knowledge of engine timing in general. Not many people know it. Thumbs up.
Good videos! I can't believe you have been on youtube 3 years and are as popular as you are and I had never heard of you till someone shared one of your videos on the Mopar engine group on facebook. Its nice to see some good solid Mopar videos you are doing finally because there isn't a lot of good info on youtube.
I was a developmental technician at ford in the UK in the 70’s one of my jobs was setting distributor curves on the rig the same for long range vacuum advance - this was how timing was advanced on the dyno, the same for the carburettor- AFR was tuned by pressurising the float bowl either pressure or vacuum old school pre electronic EFO
I learned to power tune from a Hot Rod magazine that I read while working, back in the late 90's, LOL. Then got the parts and did it to my 84 Monty. I did my Jeep AMC 360 with medium springs and soldered enough lead on the weights to have to hollow out the rotor cap ribbing. I welded a chevy distributor to the engine end to do this and take advantage of the chevy hipo stuff.
