Make Your Smartphone Faster and Run Cooler. Dual Vapor Chamber. 

I & my friend always did this trick on our older phones by reapplying PC grade thermal paste & adding thermal copper plate if needed in certain phones. Thanks PBK for publishing the review to public for awareness

If you dont wanna remove your phones cover just put a copper sheet at the back of your phone and the second layer put some thermal adhesive and then graphite sheet film

Great modification idea, and video! 👏

I have some phones i'd love to modify, myself...very satisfying. Great video idea. Love looking at the hardware in these devices.

We need more videos like this.🔥thank❤

Thorough, well done sir. 👍

Awesome video! A suggestion I have if possible is to test the water resistance or water proofing from phones. 👍

That's great idea broo...🎉

Great idea adding another chamber! That would increase the time before the SoC overheats. May I suggest one thing, when running the synthetic test, be sure to run it 3 times in each iteration and take average values? This way you can insure that the score is accurate and there isn't anything influencing the results, like apps running in background or Android doing something.

Hi, I liked your idea. I have an S22 plus, do you think this can be improved as well

Fantastic video!! Do you have any suggestions on where to source a vapor chamber replacement part, wanna do this for my old phone but can't find anything on aliexpress

Hardware modding. Thats very pleasant to see.

Hey can you tell me the materials used,im planning to do that on my phone and didnt understand some materials used on the video,Also can you tell me the dimensions of the copper plate you used?

That thing allready has one and with a fan you can prevent throttle. But with iphone xs max im need a fast fan because SOC is in empty space. No heatsink or paste just air. im gonna mod my xs max in future for pubg

what about trying dual vapor with great amount of graphite

I had an old galaxy a7 2016 which got to freaking 92°c.I applied thermal paste on the processor and ram which made them dissipate heat to the aluminum frame.The temperatures dropped drastically from 92°c to only 70°c.The phone reached 70°c in the worst case scenario.After doing this only the side metal rail got a bit hot because the processor was now dissipating heat to something.The old thermal solution was a joke.It was a super small and a very thin thermal pad which dissipated the heat from the processor to a thin copper film which would conduct the heat back towards the motherboard.I also applied thermal paste to the backside of the processor.

Ur genius keep it

Good job 👍 Up the Tab S8 😉

What are the names of the materials you have used?

A suggestion how about..u put 15 layer Griphite sheet on Flagship phone

What temperatures are at the CPU?

Bro where u buy this chamber and What Is That Sticker Is?

i think your ambient temp its very cool since your phone never get hot, but yea it helps to improve performance. i whould love to see this mod on my poco x6 pro wich gets over 80c making antutu bench, in my city reaching 42c but obviusly im doing test on my office with 25c room tem and this phone still gets over 75c :/ with scenario like this your mod would be really getting on test hhaha

Most of the phone have vapor cooler under the screen so the best position you have phone cooler is on screen?

Well done. Could you put a vapor chamber into the MacBook air m2? and compare the performance?

Nice.

How to get that vapor chamber sir?

thankyou

What do you think about the ROG 8? Should i still modify the components or not? It has the graphite all of over board

Doing the test with the phone lying on a flat surface is not ideal, because the heat dissiipation via the back surface is hampered. If I may I would suggest that you do the test with the phone in vertical position, so that the back can emig the heat to the ambient air. Keeping a note of the ambient temperature would also be valuable for comparison.

Best Solution is, Drop Your phone in Water 🌚

I'm wondering if placing a peltier module cooler on a Nintendo switch will have the same effect. I'm seeing a lot of magnetic phone coolers equipped with peltier modules or TECs.

Please make video on Samsung galaxy A52s 5G...tera down or heating issue ..thanks

Good job

PBK, I wanna get a S24 Ultra from my S22 Ultra, I'd like to see if we could try and drop temps as low as possible. The 2 Degrees is impressive, and the stability increased, while most likely not huge I'd like to see if battery life improved. While most modern laptops seem to go long enough for most, the cooler running SOC, RAM, Storage, alongside a Debloation tool may add enough battery saving alongside the 3nm Single Core / Efficiency to make the upgrade worthwhile. Think we could do something in the future?

I think mine froze it's 4° out now my phone is running hot lol

Liked the idea! However I'm curious if sticking a graphene film behind my phone cover would help dissipate heat or would it trap it even more?

Que medidas fue el pequeño cuadrado de cobre

Interesting how temps didn't change much with thermal paste change... means samsung used really high quality thermal paste

Can you add vapor chamber on the s21 ultra

Very nice

What is the difference between copre film and copre?????

Please teardown iQOO 3 (Less known phone from 2020)... I'm currently using this phone... I'm curious to see insides of my phone...

Hey also, what if you make a video about liquid metal thermal paste?

Can we put in note 20 ultra this vapor chamber

Stability is improvement. I would like to try this on my poco F3.. since that I've noticed the F4 has better cooling by enlarging its colling area

Question, better use thermal paste or thermalpad?

just done on my 2 years old exynos s22 ultra ,phone started to restart and did the black screen of death thing ,still not much about around. thermal paste was like dry biscuit and graphite foil was dried onto the shield completely around. no bsod since upgrade ,thanks

How i do it in samsung galaxy a33 5g?

Op content 🔥

Nice

1:40 no way. You nailed it, it's such a common misconception 😅

The fact is when you cut the vapor chamber all the cooling magic is gone. A small copper piece will do better than that piece of vc

90% it’s battery. We fix slow down all the time.

Your idea was great, unfortunately most people dont think this is practicle, i recommend to use peltier cooler, not only it is more practicle, but cheaper and more capable to handle the heat when on gaming.

Try this wit the new poco f6

Do it for redmi note 8 pro plz

What about iPhone? Is it possible?

So, replacing the paste and adding a shim made things worse for some reason

That black pad when you remove cover. Remove it. It traps heat to not hurt your hand. May also be for to hide wireless charger

Just disable that Trash #GOS then you'll see liquid cooled performance for a minutes.... After your customisation that minutes will increase

Very informative video. Kudos .This is what we need and not some jerryrigs telling jokes and puns all the time.

What is that silver paper ?!

My S22 Ultra is reaching up to 70°C while recording a video. Should I be worried?

Personally I'd first replace the stock battery, then take the phone apart some more and fabricate an aluminum backplate and attach a vapor chamber on it so it makes contact with the SOC. Then I'd change the operating system with a custom kernel with overclocking functionality. If you pair all of this cooling and power and fresh battery and a more optimized OS with an external phone cooler, that cools the aluminum backplate down, you can possibly run your device with at least 60% more clock speed if not double (stability may take a hit after 75% increase) I did these steps with my Razer phone 2 from 2018. Pixel experience aura build, took out the LED RGB and replaced the battery, put an aluminum backplate on and attached a secondary vapor chamber on it.. the phone now runs at 3ghz all the time with no issues and 3.2ghz if I really need the horse power and if I need extra cooling, the modifications I have made already makes it extra efficient.

But is it still waterproof? I have no idea what people do with these S22 Ultras, I had never any heat issue (Exynos) and it's performing like a beast.

Shittysung made the 8 gen 1 should have been made by tsmc

If you need vapor chamber, just contact me :D

❤️❤️❤️❤️❤️🇮🇷🇮🇷🇮🇷🇮🇷

I am already do this with my phone so nothing special 🙄

If the phone is running slow and sluggish, an easy solution would be to get an iPhone instead.

Another thing, PBKreviews. What does PBK stand for?