Making A Star Knobs With The Knob JIG 4 in 1 

Hi guys. See the latest version of JIG ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-mJ_6R3GXCNk.html - Star Knobs JIG 4 in 1 - upgrade and safe rounding Knobs. Final version. Beautiful Wooden Star Knobs -

Learned something new, thanks! Those that want to use dividers go ahead. A guy who doesn’t have a real drill press may not have dividers also, but he still taught me something!

have never seen a holesaw like that before... i have the regular one and the carbide toothed ones and am constantly using a little brush to get the teeth cleaned out...

Wow love that timber pedestal drill

Watch for scraps from boat builders,sometimes they throw away pieces of teak,mahogany and other exotic woods,a lot of decks here in the south,use ipe wood,beautiful finish and very hard,enjoyed your video

It’s those little things that make a big project great

Muito bacana ficou excelente seu projeto para modelos de manipulas foi uma ótima apresentação e muito boa à demonstração e de grande utilidade obrigado VALEU

clever idea - well done!

It would make sense to lay out all your lines before you cut any holes in the jig. It's easier to lay out lines from a point rather than try to accurately find the center of a bolt or a hole. Just a suggestion.

Hi, how do you do the measuring for 1-4 points around the jig? It went a little too fast for me :)

👏👏👏🙌 Perfect... Beatiful.

Would you have circle sizes? I like the jig very nice design looks easy and fast! lou

Wow. You have the writing of numbers of an architect.

muito bom esclareceu e mim tirou dvidas agora sim

Nice jig. But you could have made a like where the corner of the previous cut should be instead of the middle of the round part. That way you would not have to measure up the middle of the rounded part, when you turn the knob for next cut. You just have to turn it to the corner of the cut.

Tirando o barulho, a execução é muito boa sem dúvida 👍

NICE I LIKE IT

La idea es muy buena... PERO, si haces el proceso PAUTADO (cada pauta según el número de cortes), será muy rápido y todas las piezas iguales. Ojo, todas iguales, según la Pauta correspondiente. Saludos.

Brilliant.

Very clever jig, but rather you than me on the router table! Good work

Great project! It would be great to know the diameters of the three holes you use in the jig to cut the excess wood from the knobs

Great Video, but what size hole saws did you use?

I don’t reallly understand all the measurements you made, but this is cool.

quite good, well done.. I would just have 2 things to suggest: A much more powerful drill for your drill press, and PLEASE use the insert for the router, fingers don't grow back!

the fingers are way too close to the router bit! i would install the bolts using threaded inserts and use a bolt to guide the piece while routing. it‘s a lot of work for something that can be readily bought. i would use dividers and math to do the layout. nevertheless, an interesting video.

An ingenious jig which produces great looking and practical knobs. Much better looking than factory plastic one . So the good part of the project is the precise jig that you’ve made making it possible for reliable repeatable knobs. The only remarks I’d add which you can take with a pinch of salt is: ideally you’d use an insert fitted into your router table just a little bigger than the cutter. Although it may never have happened yet, but if one of those knobs were to be accidentally tipped a little the cutter would instantly grab it our of your hand at a million miles an hour, possibly hitting you in the chops. The only other thing that jumped out at me was how close your fingers were to the cutter due to the size of the knobs. There are loads of hold down jigs on RU-vid to avoid loosing your finger tips. Your clearly capable of making one. These aren’t criticism’s just observations you may not have thought of. However I really admire the jig you made especially that you are able to make identical repeatable knobs, nice work.

Hello sir, What usualy you used "varnis" to swab the wood ?

Super

Perso..... j'aurai fait des gabarits, avec un carton ou des plaques offset en alu pour fair le traçage sur le contre plaqué !!! Pour le boulon j'aurais mis 1 ou 2 rondelles pour éviter d'écraser le bois !!! Ceci dit l'idée est génial !!!!👍👍👍👍👍

Hi, what kind of paint/oil/wax did you use

And also by the way as far as the bolt or stud whatever you want to call it I simply drill an undersized hole for example I use a 13/64 drill bit I use a quarter inch by number 20 thread screw buy whatever like and I let itself no need for glues backer boards or whatever again kiss!

I applaud your ingenuity but I do think it might have been simpler to make some paper templates shapes to cut from.

👍👌

Awesome but damn I hope you have hearing protection. That drill is as loud as an old vacuum.

Would you have dimensions for the jig, I’m sure the positioning needs to be precise. Great videos

My father almost lost his thumb using the same hole cutter as seen here. Keep your fingers clear and hold your work with clamps

Respectfully, all you really need is a line connecting the center of the the knob with the center of whichever radius you are using. By marking the divisions on the knob itself all you'd need to do is line up your division lines with the center line and cut your radius. Thereby eliminating all the other lines marked all over your jig.

mostly useful video, but in some cases (1:59-2:59) it’s useful to use a protractor (anglemeter)...

Wow, fine, I put it on my todo-list - I think your turningspeed is little too much - greetings from my german channel

Like

that ain't a wood drill... love the jig... i think prefer to have one kind of knob, makes it so much easier.

لماذا لا تذكر القياسات

What hole saw is that your using?

Disculpas, pero hay formas más sencillas de hacer perillas...

about as clear as mud.

This is some next level shit. Thanks!

you maked a knob.but you maked F16 engine

Не понятно почему сверлом для бетона (с твёрдосплавной напайкой) сверлит дерево?

Very nice jig - but. Anyone can drill holes, how about writing the dimension so we can replicate. Credit where credit is due. It's all I've seen so far. Here is the jig, go ahead and try and replicate (of course it won't be as good as mine). Show your work!

you have made a very simple job into something very complicated. All measurements are not justified by the result obtained.

More glue

Hi, good idea, but no explanation.

Can't you explain what you are doing?

It's impossible all progect

Nothing is understood!

What are you doing? What are you measuring? Makes no sense to me.

13:34 rounding these edges on router was pretty scary. I would not suggest to anybody to try this at home. Safety dude! Think on this.

Sorry for the thumbs down man but that's way too much work I made a simple template out of 1/8 in plywood it is 3 inches square with a center hole and for finger holes I simply place the template on a 3 inch square piece of plywood I Center punched the holes then pilot drill the holes then drill the holes at proper size and use hole saw for the overall diameter take s5 minutes maybe fancy jigs our nice to watch but they're really not necessary as the old saying goes kiss... Meaning keep it simple stupid oh and by the way I can clamp as many as I want together I can make 2 3 4 5 at the same time in minutes nice video though way over complicated for my taste I don't have that kind of time on my hands.

Muy complicado nada práctico les recomiendo este video es muchisimo mas sencillo ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-w-wQwdjN-yA.html

To much complitated !!!🙈

Apparently the concept of dividers totally escapes this wanna-be wood worker. Way too complicated for such a simple project

Одно из самых бесполезных приспособлений что я видел… пару полуляхов, не больше)

Woodworking instructions played much too fast from a guy who built his own drill press that visibly flexes every time he uses it. Is the theory here that anybody trying to duplicate this must watch the video multiple times, thereby increasing the number of views and ads served? Spare us.

👍