No video :(

Making Dining Chairs From Scratch (Part 1)

Подписаться 1,2 тыс.

Просмотров 24 тыс.

50% 1

To check out my shop for merchandise and other pages click here.
linktr.ee/pine...
Chair Plans and templates www.pinerowfur...
- Tools and Items Used
Titebond 2 Wood Glue amzn.to/3MV49S8
Glubot amzn.to/3LLuh1e
CA Glue + Activator amzn.to/3TTxpN9
ScotchBlue Painters Tape amzn.to/3qho1Ft
Suizan Japanese Pull Saw amzn.to/3cQlnU5
Milwaukee Drill/Driver Set amzn.to/38SOZOk
Milwaukee Drill amzn.to/3qjJM7x
Self Centering Dowel Jig amzn.to/3MMzwOG
Dowel Centering Pins amzn.to/3MQI4UV
Bosch Router amzn.to/38oGaMe
Freud Top Bearing Flush Trim Bit amzn.to/3RJ4Cc3
Freud Bottom Bearing Flush Trim Bit amzn.to/3RJ4Rnt
Kreg Router Table Insert Plate amzn.to/3x6LmNX
DeWALT Compound Miter Saw thetoolnut.sjv...
DeWALT Jobsite Table Saw amzn.to/3KSzaGc
DeWALT Thickness Planer amzn.to/3AUst1D
Bosch Random Orbital Sander amzn.to/3BoZB3f
Diablo Orbital Sander Disks amzn.to/3D2Lthj
For great deals on tons of Milwaukee power tools and equipment thetoolnut.sjv...
Recording Equipment
Rode Wireless Go 2 Microphone amzn.to/3FfNhCM
Rode Patch Cable (Needed for connections to iPhone Dongle) amzn.to/3PEUEIJ
(As an Associate I may earn from qualifying purchases)

Опубликовано:

6 сен 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 42

@jiricabadaj8397 Год назад

Super set. thanks for video.

@michaelbradford4444 Год назад

Thoroughly enjoyed this video, loved your woodworking purist comment! Lol ... Looking forward to Part 2

@pinerowfurniture Год назад

I’ll hopefully have the other video uploaded shortly.

@SugarCreekWoodwright Год назад

Well done! Been wanting to make chairs and the use of templates never occurred to me. Thank you for pointing it out!

@pinerowfurniture Год назад

For consistency it can’t be beat.

@jonbryant5665 Год назад

Please get a starter pin for your router table, it will help you control going into it and to handle kickback better.

@pinerowfurniture Год назад

I do have a starter pin and it would have likely made my life easier. Most of the time I forget that I have it.

@ninjaex650 Год назад

Solid video. Making chairs has always been a daunting task for me, definitely a market for the one-stop-shop experience though. I learned from your video that there is no substitute for templates and jigs when batching these things out. Thanks for sharing!

@pinerowfurniture Год назад

Having a template or jig is definitely a must for accurate repeatable cuts and pieces.

@dennislaff2916 Год назад

Oh uh

@rowlandstudios3244 Год назад

Great Video! keep up the good work

@pinerowfurniture Год назад

Thanks!

@josh_watson Год назад

Really nice build quality on the chairs. Well done. Also, when you're talking about the mortise/tenon's around 10:20, you're basically making a mortise and tenon. Just instead of cutting it all from one piece, you're inserting it in the form of a dowel. Same principle. Cheers!

@pinerowfurniture Год назад

Yeah dowel versus mortise and tenon are very similar. Both joints are strong but if I was intentionally making a visible joint, I would definitely make a mortise and tenon.

@pinerowfurniture Год назад

Some people have asked and now you shall receive. I have the digital plans and templates for the chair available now on my site. www.pinerowfurniture.com/product-page/dining-chair-plans

@jserra17 Год назад

I am watching chair making videos to prepare to make a set of dining chairs for my home. Thank you for this video - the best at explaining the process I’ve watched. You have a gift for explaining complex tasks in easily accessible terms. One question, did you consider contouring the seats?

@pinerowfurniture Год назад

I did consider contouring the seats. I felt that it wouldn’t fit the style really. Could be done after it’s assembled if you wanted though.

@rickclark2459 3 месяца назад

My son and I just spent the $35 to get the plans. I appreciate the templates, but was surpised there was no cut list, an indication of board feet needed or any instructions. How do you make the curved cuts on your templates?

@pinerowfurniture 3 месяца назад

The document you purchased has a rough dimensions cut list for each piece on the last page. Because it depends on what material you buy the board feet needed can vary. It may be hard to find lumber in certain dimensions in different areas so I give you the option to buy whatever wood is easily available to you. Depending on what tools you have you can cut the radius with a jigsaw and clean it up with a sander to make your templates. An alterative if you have a drill press or regular drill you can get a small drum sander that you can chuck into a drill. If you need help with anything or aren't sure you understand something you can send me an email.

@rickclark2459 3 месяца назад

@@pinerowfurniture Thank you for your prompt answer. I was completely wrong and I apologize for taking up your time. I only saw the first page of those chairs plans, so that is my fault. The document is extremely well done and I appreciate it - it is EXACTLY what we need! Thanks, also, for the suggestion on those curved cuts. As we all know, a new project is always a good reason to get a new tool! :)

@janeannothanks8371 Год назад

As someone with hearing damage from being overseas, seeing you using the router without hearing protection made me cringe. You'll regret this later. But the build, is absolutely amazing! Great job.

@pinerowfurniture Год назад

I have hearing damage from being in the trades too, mostly from powder actuated tools. That router isn’t that loud with a flush cut bit. But if I throw in a giant raised panel bit in there that thing screams like a banshee. I’ll wear hearing protection when doing that though haha.

@robwiencek9608 Год назад

I don’t have nearly the skill set it takes to make chairs (YET). Great video. What type of wood are you using? Subscriber #415

@pinerowfurniture Год назад

I used red oak for everything. Also I have digital templates and plans available to make these same chairs. It may seem overwhelming looking at the whole chair, but when you break it down piece by piece it’s relatively simple.

@itachi975x Год назад

Hello do you have plans for the chairs or the templates

@pinerowfurniture Год назад

I currently do not have the plans for sale but I have seen some interest so I will likely put together some plans for purchase in the near future. Check in at a later date on my website or email me about it.

@keatonbeyerwoodworking Год назад

Beautiful chairs and nice video. One question, how did you attach the chair seat? I saw a glue bottle come out in your assembly but I couldn't tell if you glued it in or if there were dowels too?

@pinerowfurniture Год назад

The seat was glued on and also has a total of 8 pocket screws holding it tight to all the supporting pieces. No dowels are really needed. It’s not a sheer load on the connection. Only sheer load points are the connecting points on the legs.

@jasonnickerson9281 Год назад

I wonder how those chair backs and legs hold up over time, being cut into curves instead of bent. Never built anything like that so it makes me curious if the grain splits over time and use.

@pinerowfurniture Год назад

I doubt the direction of the grain will affect it. The radius is not tight enough to compromise the pieces. If it was a tighter radius you may run into problems in certain scenarios. In situations like that steam bending or gluing and forming laminations into the pieces makes more sense.

@jasonnickerson9281 Год назад

@@pinerowfurniture sounds good. It's a nice design. Definitely may borrow it in the future 🤔

@pinerowfurniture Год назад

I have digital templates and plans available if your interested for the chairs. Link is in the description.

@vmoutsop Год назад

Subscriber #154, just saying. Great video

@pinerowfurniture Год назад

Thanks for subscribing!

@ahmedalsanea6079 Год назад

I like how you said from scratch, and started by using templates and jigs!!??

@pinerowfurniture Год назад

I created the design and templates myself from scratch. Also milled the lumber myself. It’s the equivalent of farm to table lol.

@donaldbutcher1260 Год назад

Just a thought, video ( you can probably guess) is a visual medium so we really don't need the running play by play. 😮

@adamchesis7443 Год назад

dowels are in no way as strong as mortises

@pinerowfurniture Год назад

Maybe I could do a video comparing similar sized joints with dowels and mortise and tenons. I have a small hydraulic press but I need to find a pressure gauge of some kind. I am curious as to what the difference would be.

@adamchesis7443 Год назад

@@pinerowfurniture its more the glue surface area than strength, on the long Grain side the dowel has complete glue strength, when you drill across the grain there is only a sliver of long rain glue surface, there is mostly some part of end grain if that makes any sense. the mortise has a flat surface that when cut properly has a lot of end grain, and when I build a chair I will double them so I double the glue surface area,

@pinerowfurniture Год назад

@@adamchesis7443 Yeah increasing the glue surface area is one of the key points to a strong glue joint. 95% of the time any joint failure is just the wood cracking or breaking away from the actual wood glue. It usually leaves a thin layer of wood stuck to the glue itself. The wood will break before the glue itself cracks.

@adamchesis7443 Год назад

@@pinerowfurniture if the joint is properly fit and glued yes the wood will break before the joint