Making Simple Strong Gallows Shelving Brackets / Workshop Storage Ideas 

To Subscribe to the Channel click here: ru-vid.com

Admittedly will do the job - but lap joints (easiest with a Miter Saw) would be way stronger than butt joints with screws. and would show off your stuff.

Do not use the miter gauge and the fence together for through cuts as wood can stuck between the blade and the fence which can results a kick back ! Except that , very nice job .

Great video. Simple, but very effective way to store timber out of the way. I keep tripping over my timber and have been trying to come up with a good solution in a very small store; this will work! Thanks for posting. Good approach in the video; no lectures or moans, just good advice and solutions.

Hi, never use the fence as a stop block! Recipe for serious kickback.

Good shot

I made similar lumber storage. Used scraps of 1x2, and they have held out great.

Do you think this would hold cats jumping on to it ? With a shelf of course 😅

This was very nice. Easy to follow, great for a property rich cash poor guy like myself as i only have scrap boards lying around lol. Anyway, my wife loves them!

Another great project and very useful for me!! I'm looking for shelf bracket ideas and this is it - same as your drawer slides video!! Thanks for taking the time to make and upload the videos, I really appreciate them. 👌👌

Translation: 30 cm = 11.811 inches. 3.5 cm = 1.378”.

Thank you sir for this art of work ... well done 👍🏻

Yup, watch for that kickback…

Excellent video. Cheers from Canada Brother. 🇨🇦

Those turned out great. Thanks for sharing

Thank you, very helpful. What silver insulation did you use in the roof please?

Hi nice video, I’ve liked and subbed., I’d really appreciate your help, I put up a 3m length shelf (2 pieces of 150cm timber), approx 40cm deep, I used 5x large cheap metal shelving brackets, 2 for each timber and 1 in the centre to support both timbers. The brackets were fixed using 40mm screws / wall plugs to a concrete wall (must be breeze blocks as only gray dust was produced and the depth of the wall is only approx 10cm, wall between bedroom and bathroom), the brackets were also fixed to the timbers with screws, I used the shelf to hold quite heavy items (faulty laptops, etc) , and after a week there was a gradual shelf collapse, fortunately no one was injured and nothing was damaged, the failure point was the 2 top screws on the metal shelving brackets, there was blow-out and the screws were pulled out of the wall, now I’m looking at the quickest way of repairing this and adding extra support, do you think if I use proper longer screws (80mm long instead of 40mm) and add 4 more of the same metal shelving brackets (9 instead of 5) and add 3m long 2x4 timber on the wall above the shelf timbers and then screw the shelf timbers to the 2x4 timber, would this work? The only reason I’m tempted to go with more of the same brackets is it will save me time because I can use the existing holes/markings, I can probably patch up the damaged areas and reuse existing locations and I prefer the look of the metal brackets over timber shelf supports Sorry for such a long message, if you prefer I can email you with pictures as well? I’m just stressed out as I don’t have much time because 4 days I’m a full-time carer for elderly mum with dementia and I work long weekend shifts, and I repair laptops as well

nice and simple

Nice job and good video…. A bit of advice if you don’t mind, I’m looking to install a 900mm breakfast bar worktop as a floating desk with these L shaped brackets. How deep would make the brackets, would 450 (half way) suffice do you think if there were plenty of them?

nice job. I like your simple explanation of what and how you did the project. I subscribed. ;O)