Matt's Wash Process: From Start to Finish

Подписаться 9 тыс.

Просмотров 24 тыс.

50% 1

Here are all three parts in one video from start to finish of the Wash Method. As always, all the products in this video can be bought on the Obsessed Garage website and at the links below.
OG Tire Dressing:
www.obsessedgarage.com/produc...
Wheel Cleaner:
www.obsessedgarage.com/produc...
OG Spec Mosmatic Swiveling Sprayer:
www.obsessedgarage.com/produc...
Complete Bucket Solution
www.obsessedgarage.com/produc...
Koch-Chemie Gsf (Gentle Snow Foam):
www.obsessedgarage.com/produc...
Microfiber Madness Incredipad XL:
www.obsessedgarage.com/produc...
EGO Stubby:
www.obsessedgarage.com/produc...
EGO 580 Blower:
www.obsessedgarage.com/produc...
PF22 Foam Cannon:
www.obsessedgarage.com/produc...
Rust Inhibitor:
www.obsessedgarage.com/produc...
Incredibrush Flat:
www.obsessedgarage.com/produc...
Curveball Brush:
www.obsessedgarage.com/produc...
Tire Brush:
www.obsessedgarage.com/produc...
Wheel Mitt:
www.obsessedgarage.com/produc...
EZ Detail Brushes:
www.obsessedgarage.com/produc...
RaceGlaze Detailing Brush:
www.obsessedgarage.com/produc...
Low Pile Drying Aid Towel:
www.obsessedgarage.com/produc...
For more insight into my life and business become a member of Inside the Hex: www.obsessedgarage.com/pages/...
Join Our Closed Facebook Group of Like-Minded Obsessed People: / obsessedgarage
Website: www.obsessedgarage.com
Obsessed Garage Store: www.obsessedgaragestore.com/
Gear We Use Everyday (Cameras, Computers, Etc.):
www.amazon.com/shop/obsessedg...
Podcast: obsessedgarage.com/podcast/
Facebook: / obsessedgarage
Instagram: / obsessedgarage
Twitter: / obsessed_garage
Stay tuned for more crazy!
For more insight into my life and business become a member of Inside the Hex: www.obsessedgarage.com/pages/...
Join Our Closed Facebook Group of Like-Minded Obsessed People: / obsessedgarage
Website: www.obsessedgarage.com
Obsessed Garage Store: www.obsessedgaragestore.com/
Gear We Use Everyday (Cameras, Computers, Etc.):
www.amazon.com/shop/obsessedg...
Podcast: obsessedgarage.com/podcast/
Facebook: / obsessedgarage
Instagram: / obsessedgarage
Twitter: / obsessed_garage
Stay tuned for more crazy!

Хобби

Опубликовано:

8 янв 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 56

@JeanPierreWhite 5 месяцев назад

I marked levels on the side of my foam cannon bottle with a sharpie to get an accurate measure of soap to water mix. No need to measure each time. This is one of those cases where 'measure once' makes more sense :-)

@MJJCvideo 3 месяца назад

@Obsessed Garage Shorts Awesome detailing video,may I know if it's ok for you to review our foam cannon S V3.0?Thanks in advance!☺

@gflores7018 Год назад

Nice video Thanks

@JeanPierreWhite 5 месяцев назад

Any specific advice about pressure washing wheels on an EV? I noticed when pressure washing the wheels and wheel wells that I could see a bright orange high voltage cable. Using high pressure on a high voltage cable may not be the best of ideas. Suggestions on the right type of tip for cleaning EV wheels and wheel wells.

@barrycook8116 Год назад

I like the autofiber wheel brush better. The wash process is not complicated.

@mastercat33 24 дня назад

how often would you use a iron remover and when you do use it where in the wash process is it used? Thanks

@progression_decibel 27 дней назад

Can you omit buffing off the OG tire dressing for a shinier finish or will it sling?

@jerryguillaume6435 Год назад

Hi there, What dilution ratio do you use for Break Buster in the Pressol and MTM foam canon? Also, I know Break Buster is super alkaline, so does it degrade the MTM filter and Pressol sprayer head over time?

@ObsessedGarageShorts Год назад

We use Break Buster straight up in both the pressol and the foam cannon, That begin said you can dilute it down to a 1:1 ratio just know if wont be as effective.

@macanoon Год назад

You used less than half of the foam cannon , can you save it for the next wash instead of dumping it in the bucket ? Or does it not keep well ?

@YourUserNameSucksx10 Год назад

It does not keep well. The pressure from using it will kill the nozzles and gaskets if the bottle is not open. I learned the hard way by leaving it closed. The soap is now squeezing out from the nozzle due to pressure.

@HECSON23 Год назад

Do a vid for cleaning the engine

@ObsessedGarageShorts Год назад

That is on the way!

@HECSON23 Год назад

Perfect! Thank you

@PolishedMobileDetailing503 Год назад

5 oz of GSF for a maintenance wash 😅

@sixtysecondsofstephens2386 Год назад

I just thought you could have the tap mounted on the wall alot closer to the bucket to save having such a long bucket filler. Very nice setup, great products.

@ObsessedGarageShorts Год назад

It's set at that hight, so you don't have to bend over to turn it on or off, If you ask me, that's where all hose bibs should be mounted. We do offer shorter hoses though, if you wanted to make a bucket filler closer to the ground.

@skr1b 2 месяца назад

How come you guys use 150ml with the dilution when GSF website says 20ml. Seems like a HUGE difference. Are you just not getting good foam with anything less?

@ObsessedGarageShorts 2 месяца назад

If you are looking for the maximum foam it can put out 150ml is the number. But you could certainly get away with less than that. its best to try a few diffrent dilutions out and see what works for you.

@skr1b 2 месяца назад

@@ObsessedGarageShorts makes sense. Appreciate the response

@roanokejoe 3 месяца назад

Great video! Question. Why not just use microfiber towels? Soap them down, wash a section, and toss them aside. No need for the second bucket? What am I missing?

@cebasmb8250 Год назад

I prefer a pre wash over a pre rinse get rid of most of the dirt my opinion 🤷🏽‍♂️

@TheTAEclub Год назад

Yeah but you rub it in

@cebasmb8250 Год назад

@@TheTAEclub rub what in???

@TheTAEclub Год назад

@@cebasmb8250 everything already on the car

@cebasmb8250 Год назад

@@TheTAEclub do you even know what is a pre wash ? A pre wash is foam the car let it sit for at least 5 minutes then rinse it... so what ever foam you used breakdown the dirt after rinse foam then go in for your contact wash cone on now

@DownloaderVideo 6 месяцев назад

@@TheTAEclubEducate yourself on the terms bro before correcting others.

@rayp44 Год назад

This is a pro way to wash a car but definitely trying to sell some product too. I like how the Detail Geek washes a car personally.

@jaaphoogendijk671 Год назад

Obsessed Garage is literally grown into a business, so yeah they try to sell products... Anyway, the Detail Geek never promotes his products luckily...

@moisesramirez5242 Год назад

@@jaaphoogendijk671 he literally always says “Ima gonna use our detail geek all purpose cleaner, our detail geek polish, our detail geek air”

@jaaphoogendijk671 Год назад

@@moisesramirez5242 Please try to learn to spot sarcasm, it will benefit you greatly.

@moisesramirez5242 Год назад

@@jaaphoogendijk671 bruh💀, you right. My bad G, I didn’t even read into the “…” lol

@jaaphoogendijk671 Год назад

@@moisesramirez5242 No worries, I too can get excited when I read a seemingly wrong comment :). At least we're aligned on where the detail geek stands...

@dailyDIYdude Год назад

Never have agreed with the pre rinse. I like Kyles method better on this one.

@barrycook8116 Год назад

So you go right into contact wash without getting the dirt off the vehicle?

@thinkforyourself5672 7 месяцев назад

Buy a $20 1 or 2 gallon pressurized pump sprayer from harbor freight. Spray the car down with rinseless wash and wash off. Then foam and wash. It works really well and you won't need to worry about sand blasting your car with whatever grit and dirt that's on it. Works better than foam imo. Foam without contact doesn't do much unless it's high PH.

@dailyDIYdude 7 месяцев назад

@@thinkforyourself5672 yeah I like that method. I use my IK and do this method quite often

@dailyDIYdude 6 месяцев назад

@@thinkforyourself5672 good idea. I have an IK sprayer so I’ll give it a try with my rinseless

@TheTAEclub Год назад

Matt said not to use drying aid wtf??

@longjonsilvers802 2 месяца назад

When?

@JeanPierreWhite 5 месяцев назад

You guys didn't use a Tire deoxidizer like "Meguiars D14301 Detailer Non Acid Wheel & Tire Cleaner". This gets rid of that brown color on tires as they age. Sure the tire dressing covers that, but tire dressings don't last very long, as the dressing wears off you want a nice black tire underneath so the appearance remains sharp for longer.

@user-vr2tx4tt6b 2 месяца назад

I realize now that a 17 min video IS a short from these guys.

@Jeeper1378 Год назад

I haven’t done a soap wash in years. 100% rinse less.

@Admirn Год назад

You mind sharing what your rinse process is? I have the ONR product sitting my garage with Rag Co black sponge but haven’t used either one yet.

@Jeeper1378 Год назад

@@Admirn i wash my cars weekly so they never get that dirty. Most of the time i use the Mckees Gold sponge with 914/Absolute/etc. if dirtier than usual I prefer to use multiple 500 gsm towels. Start with a pre spray (256:1) with IK or Sure Shot sprayer. I also like to take a throw away Kirkland MF towel and run it on/under the door sills , area right behind the rear tires, the real dirty areas, then dispose of after. Finally use a drying aid (OG or Beadmaker). Dry with a 16x16 Rag company Liquid8r and FTW for touch up and jams.

@YoungMoney87321 8 месяцев назад

Front bumper is far from dirtiest part of the car, the bottom half of the sides and the rear are always the dirtiest. The front end minus directly behind the front wheels are never really that dirty.

@JeanPierreWhite 5 месяцев назад

This is true especially of vehicles that have a low coefficient of drag, the rear gets covered in crud.

@TopKingNL Год назад

Your pre-wash technique is lacklustre. GSF does not remove traffic films and certain soiling, you're literally just rubbing all that into the paintwork by snowfoaming it and then contact washing straight on top of it. Plus no separate mitt for the underside of the sills and bumpers, terrible.

@JeanPierreWhite 5 месяцев назад

Agreed. Foam, rinse, and foam again prior to contact wash is the new method promoted by many detailers. The two bucket method has seen its days.