Maverick High Power Tuning 

Outstanding! After wasting my money on lots of "budget" Chinese junk, I pulled the trigger on the Maverick. No regrets! FX in entirely on another level. Thanks for sharing.

Thanks Ernest. I added the Slug power kit to my .25 Mav. Now it pushes 34gr slugs 1025fps/80ft-lb. Front reg is set to 180, rear 150. Good consistent groups out to 250. Acceptable groups at 300. Best platform ever!

Muy buen video como siempre. Un genio saludos desde ARGENTINA 👍👍👏👏🇦🇷

SAYA PENGGEMAR BERAT SENAPAN INI...SEMUA PRODUK FX INOVATIF DAN ISTIMEWA DARI POWER,AKURASI DAN MODEL KEREN

My .30cal Sniper saw its max power of 102-103 ft/lbs with 49gr JSB Monsters w/ the out of box factory setup... wheel setting #7 and regs were at 110/120bar and 140/150bar

Air rifle Master class 👍

Thanks Ernest. Once again. great information. Although it would be the general same procedure, how about another simple video showing a high power tune on an M3 .25 with the Slug Power Kit (700mm liner)? Thanks again.

I LIKE.....FROM INDONESIA....FX BEST FACTORY RIFFLES

Great video but now i need a impact m3 trigger adjustment video 😉

I’d also like to see a video on the pufff of air coming out of the little hole beneath the reg gauge. Seems to be a popular issue.

Obviously this is a.25 cal. Would you start the regs at the same pressure’s for a.22 cal Maverick? With the slug power kit installed. We sure are getting a lot of.25 cal information this year LoL thanks

I’m getting close to those numbers with lower reg settings with my 600 barrel.

We need video about how install imbact m3 slug power kit

MEVRİK YES 👏👏👏👏👍

Where should the number be on the wheel to know what setting your on visually? 7 at the 6 o'clock position right side up?

so I got my gun dialed in and set my first reg at 180 and second at 150. I got everything dialed in no leaks everything is good. I went outside and shot the first shot and wow it was super quiet no power ... so I figured it needed to be shot a few times, so I kept on. I refilled the mag and topped off the bottle at 250 bar and fired again now the pellet goes into 3/4 " plywood to the skirt not all the way through like before each shot was going through 2 - squares of plywood and hitting the back stop concrete board. I am asking could this be a hammer spring issue?? or is there a number I can call to get the factory settings for the regulators for 30 cal maverick sniper? any help is greatly app

Did you just adjust anything before you adjust thr hammer spring? Is it factory settings then you adjust the hammer spring? Please i wanna know so ill follow your steps to adjust my maverick.. my max 7 is just 890 to 897fps .22

What would be the best to for 30 cal ahold hades

Do in need to change the barrel sleave to fire slugs?

Can I shoot slug without installing slug kit?

One of the most beautiful guns I wish I had one. my life dream 🥰

Hello Mr Rowe. I have a maverick vp .30 cal, 1st regulator set at 175bar and 2nd at 150bar. Shooting the FX Hybrids at 930 fps. My question is: after the gun its not been used for a couple of hours or days, the first shot is like 30/35 fps slower. Based on your experience what do you think is causing that? Thank you.

If I buy maverik sniper in .22 wich is 96J (71FPE) and replace the barel with .30 cal wich comming with 157J (116fpe) ,can i tune the rifle to 157J or the maximum power all the time wich i will have wict the call .22 wich i buy will be 96J? Its wery inportan for to know this to make choise for the calliber. Thank You!

Hey Ernest , what can I do if my maverick compact has a problem ? Thank 🇫🇷👍🇺🇸

What the best speed I would be able to get 65.5 gr NSA slugs out of a Maverick ? Those were 33.9 gr.

🤩🤩🤩🤩🤩🏅🏅🏅

Hello Ernest. Hopefully you can help me ? I have a 22 maverick sniper full power for the UK. I want to shoot 15.89 JSB. What reg setting would you recommend for the front and rear regs. Currently my ES is around 20/5 FPS can I reduce this by changing the hammer screw ? I set up the tune on setting 7 as you recommend. I love the gun I just want to get it set up to run economically. Thanks 🇬🇧

Hi is valve stop housing same on sub 12 as fac (high power) ??

What kind of airgun shoots longer and is more effective at long distances. Fx3 impact or Fx Maverick (sniper) Can you answer me honestly about that. It is incredibly difficult to get an honest answer from those on RU-vid who have posted videos about FX 3 Impackt and FX Maverick. I need to shoot 300 - 400m to kill with cal 25 or cal 30. Which air rifle of the two is better for 300 - 400 m shooting. Maverik can be regulated, they say, and Impackt can be tuned, so what should one choose for 300 - 400 meters in cal 25 - 30??? Please give me an honest answer so I don't buy the wrong one. I have tried shooting with both at a dealer, but it was only at 50 m and there was no difference between the two airguns. 

Mr .Ernest....how can i buy this FX?i live in Bali, Indonesia

I have the maverick sniper, I have put the slug kit but 150 bar of the reg I can't open it and the power drops. I have the hammer fully open, it doesn't take any more because it doesn't arm. Is there a way or does it work up to 150?

hello sir i have a maverick compact 177 calliber so how many set first & second reg even my fps is 990?i want to shoot 13.43 grain pallets,please reply sir i am a your subscriber & regulater watching your video, i search your totally video but not found my title please let me know about that as soon as possible. _________________ thank you very much

So I have a 22 Mav Compact all OEM factory stud equipment and I want to tune for 4 different pellets like the Jsb 18.13, Hades 15.89,HN Barracuda 15.1 and the Crosman HP 14.3. How would one tune to be able to accurately shoot the different pellets just by adjusting the Power wheel for the different pellets

Mantap , idaman

Tem como mostrar mas detalhes dessas Manutenção usar uma câmera para captar detalhes da gravação do vídeo You can show more details of these Maintenance using a camera to capture details of the video recording

Thank you Ernest! I got the Maverick compact .22 shooting 18.13gr at 885-900fps on pw5 leaving pw7 for slugs. But i couldn't get the sound to sound quieter, it's more like a smacking sounds. Any tips? Thank you

I just picked up a vp with a 600mm.Im unable to turn the reg past 100bar without loosing velocity..Pw on 7 screw maxed out. Tried 125 bar and got 660fps. At 145bar it wouldn't even spit the slug out. At100 bar I can get a 23 gr nsa slug to shoot 881 fps.. 39 ft lbs.. ordered the slug kit to try and hit 67ft lbs advertised but I'm not too optimistic it's going to add a 100percent increase ft lbs. Barrel in slug position..am I missing something? Had a compact .22 and was able to turn up the reg to 150 with great results..Not sure what's up with my new gun.csnt get through to anyone at top gun to help

How much

LIKE Friends $$$$

Hello, I recently purchased a maverick and I noticed that it has an air leak in the needle when fired without the cheek support, I changed all the orings and continue, is this normal?

My .30 maverick showed up with 1st reg @ 120 and rear wide open. power wheel on 7 velocity with 44grn was ~900, Only drops in velocity no matter what/how i adjust. Current settings are 150/120 max hammer preload, pw on 7, velocity ~ 900fps. My gun refuses to shoot over 900fps.

I have a brand new maverick that was “tuned “ from where I purchased. My spread and s.d are all over the place one shot will be 890 the next 821 then 860 then maybe 870 for example. Any ideas?

Lot of power. That’s like 79 ft/lbs

Is this official FX RU-vid channel? Wondering why it has less followers and view? What's going on here?

Fx crown grs stock

twist rate of .22 sniper barrel 700mm?

Good info Ernest, I have my maverick 600 mm set up at 170 on the first and 150 on the second regulator but getting a lots of differences in the velocity between shot. any suggestion?

my brand new 177 maverick has inconsistent fps using 16gr jsb monster. it has factory settings. the speed is 941 964 951 973 945 952 what is wrong with it?

My dream is to get a fx panthera, here in my country (Brazil) it costs the price of a car, without conditions, help me to get one. 0:07

My 600mm .30 won’t go over 880 with the exact same tune, when the gun was new it was 970-990 no problem, ever since the cocking rod grub screws let go it’s pretty much been a $2000 paper weight, very disappointing

It would help the presentation if Ernest could speak clearly & not garble his words.

Fx crown grs stock