FX Maverick Carbon Fiber Barrel Sleeve Installation & Shooting - A worthwhile airgun accessory? 

Thanks for showing the install brother. I'm new to this whole pcp shooting and because of your video I now know the pellet/slug port isn't attached to the liner, but rather the liner is inserted into the port. Two things, both have been said before in the comments. Epoxy the sleeve to the liner will definitely stiffen up the liner even more and before removing the liner one should mark/index it so you don't change your POI, like you saw when shooting the second group. The best index for the liner is where the impacts are above your POI.

This modification helped me positively in my Impact .30 700mm, since I work at high regulations 165 bar - NSA 61g at 1000fps and that is when the difference is most noticeable, with lower regulations the rifle works with less stress and vibrations are less . Nice video 👍

THX for this video. And please do follow up with a long range test and field/hunt report as you mentioned. Have a Happy New Year as well :D

Awesome video.

Awesome looking property...airgun...quad..video!! AWESOMENESS 💯!!

Congrats for showing it from the beginning with the shroud removal

to best see if it works for you and give it a real chance, shoot off a bench, little to no wind. whatching you shoot, you were kind of all over the place shooting off that rail. generaly i watch the pellet go where you aiming when you pulled the trigger and some times you were off dead center when you sqeezed the trigger. you can get away with timming your sway for hunting not with target shooting but thanks anyway for posting

Thanks for the video! I finally actually saw the whole process of installing the carbon sleeve so I can be more confident when doing mine. ;-) I suggest much more stable position and gun support for group shooting. If you slow down this video the gun shot all the pellets exactly where you point it. At such a short distance even with the wind it's pretty much one hole gun. The group you see - no offense - reflects your shooting skills, not the gun accuracy. Enjoy your gun, keep shooting and the improvements will come along. ;-)

Changes the harmonics a bit. Recommend using a rear bag for group shooting. Happy new year bro

I left one o-ring before and another after the sleeve. Also, I took note of the red marker on the liner and made sure it was pointed up upon install.

Links for cool stuff: Case: (Helps the channel!) amzn.to/3SHLP0I Check out the best airgun shop around, High Pressure Pneumatics at www.myhighpressureair.com 🎯 🎯 🎯 Tell them Air Shootist sent you! 🎯 🎯 🎯 Adapter to fill FX Bottles: myhighpressureair.com/huma-quickfill-adapter-for-fx-bottle/ Join the FX Legion and earn cool stuff! Like, actual, tangible STUFF! Use this link: api.brandbassador.com/s/ktwyeq ------------------------------------------------------------------------------------------------------- HELP THE CHANNEL by shopping on Amazon! Just click in via this landing page and add items to your cart to help me ironically tax anti-gun Amazon into supporting a shooting channel! 😂 😂 😂 amzn.to/3gLVpD2 Shop on Pyramyd Air via this inexplicably long Landing Page: www.pyramydair.com/?referer=217&Pyramyd+Air+-+One+stop+shop&Air+Shootist&cjevent=a3fb1f2e168011ed83f8a69d0a82b82c Check out some digital night vision options! These links help the channel! 🎯 Oneleaf Scope Attachments - turn any scope into a night scope! 12mm Version (shorter range): oneleaf.ai/commander-nv100-night-vision-add-on-12mm.html#u30 16mm Version (longer range): oneleaf.ai/commander-nv100-digital-night-vision-monocular.html#u30 Scope Adapters: oneleaf.ai/commander-nv100-scope-adapter.html#ü30 🎯 FULL Digi Night Vision scope WITH rangerfinder and IR light! This is on par with the much more expensive ATN brand! oneleaf.ai/commander-nv400-4-52x50-4k-digital-day-night-vision-riflescope.html#u30 ~~ ---- 10% off with code "ONELEAF10" ----~~ Interested in commercial / promotional / collaboration activities? Getting together to shoot? Questions? Comments? REACH ME HERE - AirShootist@Gmail.com

Very nice video! Maverick Sniper and 480cc bottle maybe?

These barrels are legit

Who makes that case you’ve got for your Maverick?

👍

I was wondering if you had a 500 mm FX impact barrel and you wanted to increase it to 600 mm can you just buy the liner and just get a barrel extender to save money?

Even if it didn't make a difference in accuracy, at least now you don't have to deal with barrel Orings anymore. Worth $30 to me! I have 2 coming. 22 & 25. I may use adhesive to stiffen further and be done with it. (Think "plywood")

How do you have your FX set up?

What kind of scope do U have installed? (full options: scope camera, etc). I'd like to buy same setup. thx

I am considering getting a Maverick and would like to ask you what you think of it now that you have had it quite a while? What are the positives and negatives? I am considering a Maverick or Impact M3.

What case is that your using its B A

MEVRİK MEVRİK MEVRİK YES 👌👍😊

Do the guns come in a case like yours ?ty

Did same cf sleeve on my Maverick Sniper 30 and 25 Power Pup. FX Is coming out with 800mm barrels with a titanium sleeve and shroud probably not until IWA

A barrel index would have really give you the POI your looking for. However, still awesome groupings.

what case is that you have your maveric in ?

If you fx fans see this that has improved, I see the same, because you had to take several shots to see if it's okay, I don't see improvements, those liner are useless, put solid steel barrels, you can see my weapon that with 16 ”I can best grouping at 100 yards AirgunLR

Where did you get the case for the gun?

where do you get maverick rifle case with the cutouts like that

Are moderator illegal to have on a air rifle? Where did you get the gun case from?

What kind of case is this?

Outstanding tutorial! This looks like a good upgrade. Perhaps paired with the superior geavy slug liner. Thanks for sharing 👍

epoxy'ing the liner to the sleeve would improve rigidity... or Fx could stop using brake line for a barrel on $1500-$2000 guns... that'd be nice too lol.

Subbed for the helpful content and because you find it cringe to ask for likes and subs lol.

Its much handier if you let it locked in the rifle. So you can unscrew it much easyer

Barrel to Bottle Band will stiffen it considerably.

i bought 3 of the carbon liners and none them fit i have the worst luck with FX

Your shooting off hand can’t really judge weather it helped or not.. try a bench

Not to tight, just handtight....

Some people epoxy the hole thing

use a bench.you should know better that was terrible!!!!!

Accuracy should be tested at 100 yards & more with modern pcps.