If the original Electronic Ignition Switch (EIS) is not available. This is how to program a used EIS using the security data from your Engine Control Module (ECM). If you need this service. Contact me. -Michael Call 818-510-3375
Hi. You have just shed a lot of light on a procedure i was about to do for the first time. I am going to be attempting it on a W212 that has only the ECU and no EIS/ESL but a KEY. Thank you.
And this is the answer to my question: if my EIS is damaged and i cannot recover data from it, is it possible in another way to make my car work with an donor EIS? Thank you man, you are the best.
Glad we could answer this question for you. Yes, I can use the data from you’re ECM. This also works the other way. If someone took your ECM, I can program a donor ECM from your EIS.
@@eurowerx4267 not at all. i just played with an chinese Start/stop keyless entry sistem, and solder wires on motherboard of EIS, until i broke it. now i need another EIS to try again 😂😂😂
Hello my friend, I have a w203 and I bought ECM and Eis used from the same car. I want to put the right vin number on it, is it possible? The old parts where burned.
Hi I have Abrites with mercedes full. Can you please tell me the ecu connection. What ecu plug do you use? Did you use the relay box? From where do you know the pin occupancy? The rest is totally clear. Greetings from Germany
Hello my dear friend I am eran from peer locks in Israel We are distributors of abrites in Israel I am tactical support peer locks Josh lavi Ltd My question is the cable you connect the ecu is abrites product or you built your self Tanks eran
@@mercedesbenzspecialist right but then you required to replace/reprogram the esl/emulator… I thought you might had different solution Anyway thanks for the response
@@sashmann There is another way to get the key password. From the original key. You would have to remove the eeprom chip and read it. Reprogramming the esl/emulator is much faster and easier than the above option.
Quick question. Same situation, except i have the original keys from the stolen eis. I have the password and ssid. If I simply insert the key password and key ssid at the same stages as you, will the keys work straight away at the end of the whole procedure you've shown in this video?
I have a 2015 ML350 that I just bought and came with only 1 key. I was told these key fobs use a different technology (ezs?). I compared my key 2015 ml350 key fob with my wife's 2017 gle350 key fobs and they all have a 9 digit serial number on the tip where the triangular panic button is. Do you know if I can buy a used key with the same 9 digit pattern (not the same numbers, rather the same pattern of 4 numeric digits, one letter, followed by 4 numeric digits) and then get it reprogrammed at a Mercedes dealer? I heard someone say that these newer keys can only be programmed once, which is a load of hog wash from MBZ if it turns out to be true.
You can’t program a used EIS with Mercedes Xentry/DAS. What year and model is your Mercedes? The only way I can help is if you send me your original EIS and the used one you purchased.
Great video! I tried doing this to W208 body. It didnt work. With 211 and W204 I did it with success. Any idea what Im missing with the W208 body? I write on eis without problem, personalize and activated.
Yes. The used EIS must be erased, then programmed, and activated before it will function. It’s called cloning. mercedesbenzspecialist.net/shop/ols/products/mercedes-eis-cloning-1998-2014 818.510.3375 mercedesbenzspecialist.net/
So I think I might have an EIS problem. Codes all say my secondary fuel pump malfunctioned and yes I ran the codes with my mechanic who has the vin specific codes. But I have to ask the secondary air pump system shouldn’t prevent start should it? I’m about to tap the solenoid on the pump and possibly the steering lock to rule those out then I’m gonna take my only fob apart and look for anything on the board and put the EIS and look for any board issues. If that doesn’t work I think I need to box up my fob EIS and ECM and mail it to you from canada. Does my plan make logical sense? It won’t crank, windows don’t work and the codes are all secondary air pump. I am poor and live 3.5 hours from a Mercedes dealer. When I bought it pre Covid I lived in a big city will lots of options. Advice?
@@peterdentremont7296 Have you watched my video on diagnosing and replacing the ESL with a electronic emulator? ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-n0c0kSCHtyk.html If when the key is inserted the ESL does not unlock. With the driver door open, you have a message that reads "take key from ignition". That is a very strong indication that the ESL has malfunctioned.
@@mercedesbenzspecialist you are a hero yes the paper clip and esl fuse pull worked now I need to watch your other video and see about sending my EIS and Key from canada to California. I’ll watch the videos first so I don’t waste your time with more questions. Thanks. I might have to put you in my will! Lol!
@peterdentremont7296 I ship to Canada frequently. Get in touch with me via text message. You can also call me using whatsapp if you're in Canada. Call us at 818-510-3375
I have a Question, i have a 2010 ML 3.50 Base 3.5 If i purchase a used Ignition and ECM from the same Vehicle will i have to Program? Will the Car Crank? Also my ignition was Stolen and i cant find anyone that can help me. I thought about buying a used ignition but i cant find anyone to program it because i dont have the original ignition
You would need a full DAS kit for no programming. EIS Key ECM TCM ISM It’s much less expensive to replace your EIS and key. We can program a EIS and key using your ECM. 818.510.3375 We will answer phone calls 7am-5pm PST Monday-Friday
Hi , i have a question If ezs stolen have a number of ssid, Ezs "new" have other number ssid. If ssid of ezs and dashboard is not the same i think that you can not ser km in dashboard only you have ------- km Thanks
@@mercedesbenzspecialist this link? This price is with your own donor EIS or my donor EIS? I don’t have the original EIS, someone replaced it and threw away the original one
i just paid 400£ for a service like your video but my car still want turn on it only unlocks the steer no crank no nothing only shows miles ,someone knows what can be?
I can get your EIS issue solved. Send me your EIS, your key, and your ECM. If I can’t get data from your EIS I’ll be able to get it from your ECM. Get in contact with me. 562.233.0989 -Michael
@@travisfrrll1 $110 for a new programmed fob. $160 for a new programmed fob with the emergency metal key blade cut. mercedesbenzspecialist.net/shop/ols/products/mercedes-benz-spare-key-programming-1998-2014