Mercedes CLK430 W208 ME2.8 ECU How to program used ECU with KTAG to swap with original 

Hello, this is for anyone not understanding the pin assignment. It's not a misprint... The first number is the section. The ECU has 5 sections. Some read from right to left while others read from left to right. One only needs to look in side and you can see the numbers. So 5=section / 7=pin number. This is why you have 3 5's for a total of three pins in section 5. Hope this helps someone.

Thank you for this video. I was trying to read off the ECU data off a ME2.8 from a Crossfire, but i had the same issue as you: only one red power wire that could be connected. Spliced the orange one onto the red one, and sure enough it started working! The thing at 8:349 isn't a misprint. Its connerctor 5, pin 7 (you can see the number 5 in the back of the connector, too).

Thank you for simple & easy video!

I really enjoyed this video sir. Thankyou for a great video.steve from the uk.

Have the exact same issue with my C43 w202 will try this. Thanks

Big kurdish thanks to you great job easy and perfect explanation.

Excellent video. Thanks so much.

thx for that nice video! if i see that right on you video the capacitor(the blue one in the corner) on your first ebay ecu is broken... if its inflated you just need to change this thing and it should work...

Thanks, Marco! I saved my wife's 2006 SLK350 with a cooked ECU using the KTAG and your video as a guide. I bought a used one off of eBay for about $220 and cloned it. Awesome! It was a little scary because the soldering was much more complex than for yours (multiple close pins in a dual row), but I got it done with a hot air soldering kit. It was totally scary having to do it on both the old one and the new one, but it worked! Now I need to fix the darned front SAM. :(

thank you very much for this great video . love your way :)

Nice work!

Can you add Pop and Bang with this Programm?

Can you give us a video on how to install and use the disk that comes with the KTAG

Learning alot

Is the immo also kopied on this way? , and in which file of the 3.

Good work

Hi I'm having trouble downloading the actual app for the ktag

good video thanks

Great vid thanks

I was wondering the problem of the eeprom fail. Is that the same code of the eeproms? Memory insufficiently or just bad one ? Thx

Very explanatory video of the process. Thanks for your efforts. In this tuning you wrote your old ecu's params to your new ecu. But what if you wanted to modify it, say remove the rev limit, where would you get those params or files?

good video

How to install program on computer bro.

Very good

Goood video

Thanks for this step by step video. Is it possible to erase engine error with this tool ? When you cloned your old ecu , previous errors didn't appears in the new one?

Thanks

Thanks for great video god please America

Loved your channel! Are you in Alabama or Georgia? Also how much would your charge to program my ECU computer? For my 97 500SL 2seater! I only can turn my vehicle on! Only! When i have some to spray carburetor cleaner gas into my intake throttle body? While the i myself turn the ignition key an it manual starts up and stay runing if long as iam spraying the gas can spray in the throttle body? The ECU is not reading my old fob key ? Nor the trans ponder box is not working on the anti theft factory alarm system? Doors dont lock? Drain baterry of the car when the locks was working? Factory alarm does not work? Do you have Facebook messenger?

Hi Marco! thank you for this vidéo, I would like to know if the connections are the same for reading and for writing? you don't change anything between read and write? You have an error at the end of the writing, i didn't understand why?it's because you select the compress file (which have the 3 files EPR/flash/MPC)? I need to do a stage1 + flexfuel E85 , so i just need to write the flash modified file. thanks for your answer.

What is the model number ktag programmer you bought,and will it work on 99 430. Thanks link is invalid.

When you save the old ECU info in to your laptop and then write or paste it in to the new ECU dose it work perfectly? If yes then why changing the old 1? Is it the data well be re restored or what? I hope my question is not to complicated.

Thanks for sharing your technical expertise. It is good to have KTAG device rather than going to a mechanic for ECU replacement. My ECU C240 (Year 2004) got water damaged (from rain) and local mechanic charged almost 1K to put the used and programmed ECU. Besides to this Do I need to program any to my keys ?

Is this possible also with kess v2?

what if ktag doesn’t load the driver for my e430 ME2.8 ecu? where do i get the driver or request it from ?

What windows operating system are you using because mine isn't working I have windows 7 and windows 10

This is a great video, thanks for sharing. By the way, how do you open an ECU? They appear to be sealed up with glue or caulk. I tried to open my W164 ECU, and it was as tight as a clam.

SIR, CAN I DO SAME WITH A 2008 GL550?? I AM TOLD I HAVE AN ECU PROBLEM AS IT RELATES TO THE FUEL PUMP....CRANK BUT NO START. THANKS. RICK B

Question: Why is the combined TEST file only half the size of the sum of the three files?

You bought CMD or Ktag it's CMD i believe ktag is written Ktag ECU cloned

@MrMarco6900 i have a clk430, ecu went out. Can I pay you to fix mine?

😂so either your second Ebay ECU was virgin hence of had the ability to write your original dump , or something else is going on which obviously you are not telling us.

Hello. Might be better to have your original part repaired at www.upfix.com Here is the service link www.upfix.com/product-category/repair-return/engine-control-repair/cadillac-engine-control-repair/