MG4 Upgrades Continue...

Подписаться 7 тыс.

Просмотров 42 тыс.

50% 1

Hey guys and thanks for tuning in this week.
So, the MG4 mods continue and this week I apply new gas struts to enable a seamless and easier way to handle opening and closing the bonnet. It’s aesthetically more pleasing and improves the general appearance when the bonnet is open.
A special thanks to XS Automobile and Motorcycle Parts Store for sending me the gas strut kit to review. These sets are available in a variety of carbon wrapped colours. If you would like to order a set, please see the link below.
The competition to win a set of these gas struts ended at 6pm GMT 26th April 2023 and no more entries will be considered.
Buy these carbon wrap gas struts here👇
www.aliexpress.com/item/10050...
More videos you may enjoy -
MG4 Wireless Upgrade Must Have!
MGZS/MG4/MG5/MGHS
• MG4 Wireless Upgrade M...
MG4 Powers Surprise Day Out and examining the Efficiencies
• MG4 Powers Surprise Da...
MG4 60 mph Motorway Range Test
• MG4 60 mph Motorway Ra...
MG4 70 mph Motorway Range Test
• MG4 SE STD RANGE 70mph...
MG4 1-Month Later Review
• MG4 Owner’s Review Aft...
MG4 gifts available here...
www.etsy.com/uk/listing/13351...
WANT TO SAVE £ ON YOUR ENERGY COST?
Join octopus today and receive £50 towards your account by using my referral code
share.octopus.energy/young-ho...
Thanks as always,
Stu
#MG4 #MG4SESR #MG4charging #V2L #mg4mods

Авто/Мото

Опубликовано:

13 апр 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 149

@stuart_thomas Год назад

COMPETITION ANNOUNCEMENT 📣 Congratulations to Stewart Burnett. You have won the set of MG4 bonnet gas struts🙌 Thanks to everyone who entered the competition 🤗⚡️

@danieljames404 Год назад

Congratulations

@stewartburnett7303 Год назад

Cheers, hopefully picking up my MG4 Black Trophy next week, fitting with Stuart's video looks like a 5-10 min job - I've seen the paper instructions 1-2 hr job 😂

@tomevans1388 Год назад

I’d Love These! - Thanks for the great review, these would be a great addition to my new MG4! Looking forward to watching more of your videos featuring the car!

@kerryosullivan5572 Год назад

I’D LOVE THESE! Thanks again for another great video, I’ve already gotten so many idea on accessories for my new MG4 that should arrive next week. Keep it up!!

@boggerblogger 11 месяцев назад

Thanks for this, followed along and made my installation a piece of cake. Great stuff.

@stuart_thomas 11 месяцев назад

Glad it helped

@bigalan1978able Год назад

I’ve had my MG4 for around 6 weeks and watching your videos has really helped me maximise my range and enjoy my new car to its full potential. Your videos are very informative and have gone a very long way to make owning my first EV an enjoyable experience. Thank you so much ❤

@stuart_thomas Год назад

Thanks Morgan, I’m glad to hear the videos have been of help to you👍

@nigeltimms3582 Год назад

Once again you have created a great video that is clear and well narrated thank you “I’d Love These”.

@nicholaswarner5475 Год назад

Great video , might fit them myself, happy to get my own, cheers Stuart.

@vavanjukebox7137 Год назад

thank you for the turorial. I will surely do that upgrade like some others once I'll get my MG4

@marlowturmoil4719 Год назад

Great instructional vid. 'wish I'd had something like this when I fitted a set to my ZS EV three years ago. Now got a 2 week old MG4 and would love to upgrade it's bonnet. “I’d Love These”.

@stephendavies3356 Год назад

Another great video of the MG 4 mine due this month can't wait now thanks

@markg5905 Год назад

Really good mod. Great video and certainly looking at getting a set of these

@Bin_it_or_Ben_it Год назад

I’d love these - for our Holborn Blue arriving at the end of the month. Keep on with the informative vids 😊

@S700KYFPV Год назад

I’d love these! They look amazing and are out of the way compared to the standard stay. Love the videos, thanks for your hard work.

@MoonMissy11 Год назад

So much easier with the mod!!! 👍 I’d love something like this, 🔥🔥

@GrantHutchison Год назад

I'd love these (and well done on another excellent video!)

@mikemorley2797 7 месяцев назад

It's the boot that needs something like this, great video as usual.

@rossiracer100 Год назад

Stuart I find your tips and videos very informative and interesting,I watched all of your videos before and after I got my se SR and this mod looks great.Keep up the excellent content

@stuart_thomas Год назад

Thanks mark, I really appreciate your kind comments and congrats on your MG4👍

@ndc5544p Год назад

Hey Stuart! AFAIK the struts have to be mounted with the reservoir (thick part) downwards, else the oil inside won't lubricate the seals properly. Correct me if I'm wrong please!

@chrisonwheels 11 месяцев назад

Instructions say he got it right.

@lizziesharks1 7 месяцев назад

He did indeed. I suppose you could argue that the boot struts are actually fitted the wrong way round?

@ThePiso79 Год назад

Amazing!

@rgpuffitt Год назад

This looks like a worthwhile mod. On my wish list!

@wapping2010 Год назад

Sweet! thks

@geoffwon Год назад

I’d Love These, my new mg4 arrives the end of this month, a little upgrade like this would be awesome for it!

@mike142sl Год назад

I'd love these Making the bonnet easier to lift has got to be a great plus

@dalesimpkins2628 Год назад

I'd love these. Picking up my MG4 next week

@cloggsy1971 Год назад

These are awesome! Think you’ll need some thread-lock on the nuts & bolts in the wings (or Nylock nuts). You might want to consider some nylon washers under the metal washers to protect the paint (if you’re bothered?) Nice mod 👍🏻 Would love to be considered for the set of these you are giving away 👍🏻 aka I’d love these!

@realganbada Год назад

Thanks. i was a little skeptical about them. But i think i order a pair now. Thanks for Clarification in this Video. :)

@Ginger_ita Год назад

Cool video! looking out to buy this kit as soon as someone creates a plastic shell for a frunk! (got my mg4 se in italy one month ago!)

@mcwink941 Год назад

Nice detailed review.

@timburke6882 Год назад

I'd love these . Picking up my LR mg4 in the next week or so

@bill_heywood Год назад

Good work. You could add the sound deadening under the bonnet whilst you are under there 👍

@user-gt2zn9il8l 10 месяцев назад

Like this take delivery of my MG4 trophy in 6 weeks will definitely be putting this mod on when I find out were to buy it thanks

@stuart_thomas 10 месяцев назад

Enjoy it - link in description although these are very common on Ali express

@SergeRubcov Год назад

I’d Love These for my Trophy. Great video by the way 👍

@paulkitchen3970 Год назад

I'd love these, as an addition to my dad's brand new mg4 trophy.

@paulbramwell Год назад

I love these !

@philipmarshall4304 Год назад

I’d love these. I always struggle with line and end up balancing the bonnet in my head

@MUFC1933 9 месяцев назад

Brilliant

@Tsenngu 10 месяцев назад

Nice! I need to find out where to get those struts from Norway. So much better.

@paulbramwell Год назад

I’d love these!

@johnnyhansen76 Год назад

Nice 😊

@stevehanshaw2729 Год назад

I’d love these for my new mg4 ❤

@johnmegarry1127 Год назад

I’d Love These

@dbedford1000 Год назад

I’d Love These

@macjim Год назад

I nearly choked on my beer… installation manual; a sheet of paper! 🤣

@stuart_thomas Год назад

Only the best!

@user-we1hp2uj5x 4 месяца назад

They do indeed make the car look more ‘mature’

@DeadCArpenter Год назад

I‘d love these 🎉

@laurencemote4092 Год назад

Thanks Stuart. Keep them coming. Could you see if it works with only one strut for us?

@sdjmchattie Год назад

I expect it would work but it would cause the bonnet to twist as you opened and closed it which would eventually mess up the hinges.

@RB-lt8kt Год назад

Nice

@aadamileekennedy2754 Год назад

I’d just be worried about damaging the paintwork with those metal bolts, nuts, washers etc. Even without moisture, metal on metal, unless it’s the correct composition, can cause corrosion.

@montyzumazoom1337 Год назад

Yes in my opinion it needs rubber or felt washers both sides of the bodywork, it was my first observation.

@bic1947 Год назад

Oh, yes please, include me in the draw please. Nice product.

@stewartburnett7303 Год назад

I'd love These - for my Trophy Black arriving in next few weeks

@stuart_thomas Год назад

Hi Stewart, congratulations 👏 you’ve won the giveaway of a pair of MG4 bonnet gas struts. If you drop me an email via my email on the ‘About’ tab, I can organise postage etc

@smark345 Год назад

I'd love these

@thelaserhive3368 Год назад

I'd love these....

@MErwin Год назад

I'd love this

@KeithP Год назад

I’d love these

@smlok6429 4 месяца назад

cool

@eventhiremk Год назад

ID LOVE THESE

@bigalan1978able Год назад

I’d like these.

@alfonsodelgardeo2422 Год назад

So there's no storage space under the bonnet, and there's no oil/water to check so I would imagine that once you've showed all your friends that there's nothing to see under there the requirement to open that bonnet would drop to (approximately) never?? Hardly seems worth the "upgrade".

@stuart_thomas Год назад

It’s a fair way to look at it. The other way of looking at it which I try to portray is, if your not able enough, or struggle with heavy objects, these make it easy to open/close. Now that might be once or twice a year for windscreen wash but it’s better than the current offer. It’s quite a heavy bonnet so this will really aid a lot of people.

@alfonsodelgardeo2422 Год назад

@@stuart_thomas They've just announced these cars here in NZ. I think they'll sell like hot cakes. Good looking, good spec and not quite as "deliberately odd" as an Atto3 or GoodCat

@antoinekurukchi283 Год назад

I’d Love These . Might be worth mentioning how you'll notify? Lots of scammers around on youtube. Love the vids. Thanks

@jackslade3854 Год назад

I'd love these, just a comment mine has sound deadening on the bonnet

@philsabode Год назад

I'd Love These - although overseas, I have a UK address (of a relative) so please include me in the draw!!

@kinross24 Год назад

Aren’t the struts you fitted upside down? I fitted struts to my 38 Ioniq a few years ago. Best move as I keep my charging cable and 12 v battery booster under the bonnet so can easily open now with one hand

@stuart_thomas Год назад

I thought that originally, but they arrived that way around even though I did unscrew the fixtures for demonstration and the ‘wonderful’ photographic instructions supports that too 👍

@martiangod Год назад

No struts are normally fitted this way, the oilneeds to sit at the bottom against seal so the tod runs through it

@catalincazacu3319 Год назад

How do I remove the back cushion seat?

@richardharries5551 Год назад

On and I'd Love these please

@dbedford1000 Год назад

I brought a set of struts for a to be purchased MG4! Since change to a ZS so if any one is interested I have a unopened strut kit. £30 including postage mainlands UK. Despatched on receipt of payment.

@deephousedave 4 месяца назад

Hi Stuart. Many thanks for this. I've now been the proud owner of a brand new se lr for 5 whole days and have just completed this mod thanks to your instruction vid. I've gone for the red as I've got the red mg4, looks awesome. Such an easy uograde ( when you know how 😉👍), although I was briefly caught out with the 'a' hole being where the sound deadening securing peg goes. Whip out the peg, screw in the strut ball joint and away you go!! Awesome, many thanks, much appreciated. Have you still got the MG4 ? and how are the struts holding up? 😁👍

@stuart_thomas 4 месяца назад

That’s fantastic! Nice choice of colour to match the car. I still have mine and still going strong, although I don’t seem to drive it as much as I used to as I have access to other EVs which I’m either videoing with or my wife’s Tesla MY. Still love the car though ✊

@glennmorrell8964 Год назад

hi, very good demo of hood stays upgrade, but are they right way up? surely if they leak the oil would run out, look at the boot they are on opposite with the main body to the bottom. cheers

@glennmorrell8964 Год назад

Hi, looking at how the strut is opening an closing I can see now that the strut body would hit and jam on the car panel preventing the bonnet from closing so maybe it is correct, cheers

@martiangod Год назад

Nearly all struts are fitted this way up they're supposed to be so the oil sits against the seal and lubricates

@stuart_thomas Год назад

It’s also worth notice these sit for the most part nearly horizontal

@jamesfairhurst8525 Год назад

“I’d love these”.

@501chrisbee Год назад

“I’d Love These”.

@dalesimpkins2628 Год назад

Going to ask a boring question, would this modification affect the warranty?, also assume would need to inform insurer as well? Seen lots of people modifying MG4s, including someone adding a self opening/closing boot kit.

@stuart_thomas Год назад

Great question Dale, the car hasn’t been changed in it’s original form as such. All the original ‘secure’ components are still in place, nothing drilled or replaced and nothing to affect any existing components but it’s worth a shout with insurance company to be sure.

@iPadTex Год назад

Hello, do you have a tesla too, the noise level when driving the MG4 is less good or almost identical?

@stuart_thomas Год назад

MG4 is much quieter 🤫

@iPadTex Год назад

@@stuart_thomas but no seriously? 😳

@nortonansell Год назад

Did you take the sound deadening panel off to fit these. Or did your car not come with one ? My se does not have one. It seems to be 50/50 as to weather your SE or trophy has one. Regardless of when it was built or shipped. I presume you have to slightly modify the sound deadening panel to get these to fit if you have one ?

@user-wx6ph8fs9r Год назад

No mine has sound deadning and you don't need to touch that when you install. Appears some cars are missing this though.

@helenoliver3689 Год назад

I bought these for my Trophy. Unfortunately my car has an extra layer of what I can only presume is sound deadening under the bonnet and it is clipped into the same holes that are used above for the struts. Given the choice of removing the deadening to add the struts I have left the deadening there. (To be clear - I could possibly mess around a bit and remove the clips to fix the struts to also hold the deadening - but I paid a lot of money for the car and don't want to go messing around too much!) Oh and no fault/blame is aimed at Stuart - these would be great!

@stuart_thomas Год назад

I haven't seen the sound proofing yet on the MG4. Are you able to detach the sound proofing and then add holes where applicable for the fixtures and then fix it back in place?

@helenoliver3689 Год назад

@@stuart_thomas I'm going to guess (I'll go look again in a bit) The hole used above (the top one) is (I think) one of the holes that the deadening fixes to - the large holes are present but the two smaller ones seem to have those plastic fixings in them.

@helenoliver3689 Год назад

As I thought - the upper holes (the small ones) are indeed used by the plugs for the sound deadening. Had a bit of a nightmare though - the first one (literally) pinged out and fell into the gap behind the front valance. Until I took off the plasic cover I couldn;t actually see it - right heart in mouth moment. The washer from the ball joint however is the same size as the plug that was there - all is good. (After mny scare losing the plug though I stopped while the going was good - finish off tomorrow 🙂)

@bitmanev4331 11 месяцев назад

That just begs the question why to install gas struts on a bonnet whats not a frunk? The only time you need to open it is to add screenwash. My previous Nissan LEAF was the same and never found it a problem of not having gas struts. Different story with our current i3 amd Model3 who does have frunks storing the charger cabels...

@everuss 8 месяцев назад

Thanks Stuart... Just fitted to my Trophy ... you need to remove the associated black plastic bung at the relevant point. Also I used the larger hole which is a little further out. this meant I didn't need to bend the flexible steel holder to get it aligned..

@brucetripp3331 Год назад

Hi where can I order the struts for the mg4

@stuart_thomas Год назад

Links in the description 👍

@scottelmslie2650 Год назад

I have the same MG4 ,but I noticed you have no sound proofing attached to the underside of bonnet.?

@stuart_thomas Год назад

Hi scott, earlier ones came without this, was yours a recent order?

@scottelmslie2650 Год назад

Ordered late November, picked up 3 weeks ago

@aaron4387 4 месяца назад

How much do these gas struts typically cost cost?

@richardharries5551 Год назад

Isn't it funny that until you see something that you'd never thought about becomes a "must have" item. If I won a pair for my lovely Trophy I think I'd use nylock nuts as those lovely potholes the Government allows to breed on our roads shake my nuts sometimes....

@robclay Год назад

so from a curiosity point of view, if you ever wanted to remove these, is that an option? i saw that there was a tool with a locking nut attached to a bar, and made me wonder if there was an easy way to do this? the main reason i ask is that if a part ever got damaged and you just wanted to revert back to factory setup, or had to return for end of a lease

@stuart_thomas Год назад

Absolutely, all bolts and nuts can be removed 👍

@lizziesharks1 7 месяцев назад

I guess the factory set up (the manual strut) will always be there in any case. I know what you mean though…..if the bonnet ball joints were removed then would the nuts then fall into the bonnet cavity and rattle around forever more? I suspect the answer to this question might be yes. However, as all the individual components of this set up are readily available then you could leave the struts on the car (my MG dealer said he would be delighted to sell it on with this mod still attached) or remove the struts and bottom assembly leaving the bonnet ball joints attached for the next buyer to fit new gas lifts if he so desires.

@norieltercero9065 Год назад

Hey Stuart great videos i subscribed. Where did you get those struts? Pls can you give me.a link. I got my mg4 barely a month now

@stuart_thomas Год назад

👋 thanks for the sub and kind words. Everything you need to know is in the video description 👍

@norieltercero9065 Год назад

@@stuart_thomas super, many thanks and looking forward on your many future mods videos 😉

@clifftazboy 3 месяца назад

Do yjey do an auto opening boot?

@krackerman3628 Год назад

Is that rust bubbles on your bonnet at 12:48?

@stuart_thomas Год назад

It’s not - I’d be shocked to see any on a 6 month old car 😉

@tommyjakobsen5504 11 месяцев назад

nice, but are they not to hard, its seem like they are very powerfull ...

@honestjohn6222 Год назад

Yep , I think there upside down Mate

@stuart_thomas Год назад

I don’t think they are. The rear struts when closed are also reservoir top which it is 95% time. When the bonnet is closed the stunts are horizontal

@Airbag888 10 месяцев назад

Not terribly exciting product... I'd love a review of a powered tailgate strut system though.. I feel that (to a parent) it's incredibly useful

@Torchman- Год назад

Quick Question: do you have to declare this to your motor insurance company? I know it seems pedantic, but it's a matter of disclosure.

@stuart_thomas Год назад

I haven’t because they don’t effect the mechanics of the hinge or securing the bonnet. It’s just an alternative to using the fixed strut.

@entity_dragons2013 Год назад

How much more bhp did you get

@stuart_thomas Год назад

‘Bout 400 😉

@robertratkajec8899 Год назад

you chiped the paint at 8:33 while pulling...does that mean the paintjob on MG 4 is such a poor quality? Or did you pull it too hard?

@eloygarcia9393 Год назад

Lo veo innecesario, ¿cuantas veces necesitas abrir el capó? Y con más motivo en un eléctrico.

@stuart_thomas Год назад

Thanks Eloy. What if you struggle with heavy objects or have limited accessibility? Following installing it, I can appreciate this standpoint

@davidlloyd498 Год назад

How much ?.

@stuart_thomas Год назад

About £35 plus P&P

@TassieEV Год назад

There is a huge hole in the MG4 under that stupid plastic cover, should install a 3rd party frunk/froot to your MG4. Think many owners would be interested in that.

@stuart_thomas Год назад

I'd love to add a frunk, however it would require moving some of the parts around to accommodate

@TassieEV Год назад

@@stuart_thomas I would have thought by now that Aliexpress or others would have a drop in Frunk that fits straight into the MG4. I know for example there are already a few options for the Atto3 available.