C3FR250F is a flexhead 1/2-in drive split beam wrench, the dual scale on it reads from 40-250 lb-ft and 60-330 Nm, tool length 21.5" and case 26x3.5". C2FR100F is a flexhead 3/8-in drive split beam wrench, the dual scale on it reads from 15-100 lb-ft and 25-135 Nm, tool length 17" and case 18x3.5". C2FR50F is a flexhead 3/8-in drive split beam wrench, the dual scale on it reads from 7.5-50 lb-ft and 12.5-67.5 Nm, tool length 17" and case 18x3.5". MD1F35H is a fixed drive 1/4-in fully releasing driver, the scale on it reads 5-35 lb-in (0.5 lb-in interval), tool length 7" and case 8.75x5.25".
Dear Dave, thank you for your purchase. The M line is indeed highly accurate. Your comment about the knurl will be pass along to the design team! Thanks again!
Thanks for reply. Is there a way to get one where the tube is more ridgid. You are the only manufacturer that has round tubes (housing). Most everyone uses flattened tubes (housing) to increase rigidity. And it would be nice in the certificate of calibration to have actual tested values. Versus just saying "good to 3% forward and back". Tested values show real confidence as to what the accuracy is. Thx
Thanks for the amazing service. I sent in my m line and it came back better than perfect. Your M line is the best period. Just make a longer version of the 250 fl-lbs version; and make the knurling more pronounced. Thanks