MIG Welding Project Metal and Wood Floating Corner Shelves

Подписаться 110 тыс.

Просмотров 5 тыс.

50% 1

MIG Welding Project Metal and Wood Floating Corner Shelves This week we are finishing up our floating corner shelf project. In this episode we are MIG welding on the shelf support brackets, capping the top of the tube, cutting and staining the shelves then I show you how I preserve and treat bare metal for a unique industrial look. I am super happy how this project came out. This is a great DIY how to beginner welding project and it's a great way to organize any room.
👕 MERCH brandonlund.myspreadshop.com
Minway Paste Wax amzn.to/3rmrSCH
Metal Scribe amzn.to/3idI4y6
Respirator (fits under my hood) amzn.to/2Hss3Vk
Amp Bluetooth Noise Canceling Hearing Protection amzn.to/34cZciv
MIG Pliers: amzn.to/2MJ1jnQ
🔥 Buy YesWelders HERE: yeswelder.com/...
Use Coupon Code: yeswelder.com/...
TOOLS & GEAR I USE
🔴 www.amazon.com...
🔥 MORE WELDING AND FABRICATION VIDEOS HERE:
• Welding Projects
🔥 LEARN TO WELD AND FABRICATION VIDEOS HERE:
• Learn to WELD- Beginne...
⇨ SUBSCRIBE: / brandonlund
💲 EVOLUTION TOOLS - Use Coupon BLUND5 at checkout
aspireiq.go2clo...
UK BUYERS can also use promocode BLUND5
💲 FRONIUS WELDERS - Save big when you purchase Fronius Welders using the exclusive links below.
Fronius Welder Buy online bit.ly/2X5Q4tF
Where to buy bit.ly/3dbVmt2
TransTig 210 bit.ly/2ZDxElI
Specs and features bit.ly/2ZDxElI
TransTig 170 product page bit.ly/2ZK9XIq
Free Fazor promo page bit.ly/3cckZsu
💲 EMPIRE ABRASIVES - Use Promo Code LUND and new customers get 10% off their order www.empireabra...
🔥 Links to some of the cool tools you see me using 🔥
Center Punch amzn.to/33994ua
Relton Option 1 Cutting Fluid amzn.to/3cM3vFh
Irwin Chamfer Bits amzn.to/2Sa6Ft6
My Safety Glasses (12 pack) amzn.to/2H6tdZf
Chipping Hammer (the best): amzn.to/2zs3Lqg
5/8" x 1" Shoulder Bolt (EBay)
12" F- Clamps (Harbor Freight)
Graff Black Diamond Cutting Disc amzn.to/2ELiSRU
APlus Lift Pneumatic Lift Table amzn.to/30cTaiu
Welding Clamps amzn.to/33KyayS
Stick Welding Gloves: amzn.to/2L1fxOX
Metal Marker: amzn.to/2MJzImj
Drill America Drill Bits: amzn.to/2RjXk2i
Metal Thickness Gage amzn.to/32Dtn2O
Welding Blanket amzn.to/31jUjo4
Transfer Punches amzn.to/32MmpH9
Portable Band Saw: amzn.to/2Hs8Mna
1/2" Impact tool: amzn.to/2X7oYC9
4 1/2" Grinder amzn.to/32HFhZe
Cordless Circular Saw: amzn.to/33adAsP
1/4" Impact amzn.to/2DcBf0S
Any commission earned from the above affiliate links goes directly towards helping to support the channel.
FOLLOW ME (for behind the scenes stuff)!
⇨ Instagram: / lunddiybuilds
⇨ Facebook: / lunddiybuilds
⇨ Twitter: / lunddiybuilds
For Business Inquiries: LundDIYBuilds@gmail.com
Disclaimer: These videos are intended for entertainment purposes only and as such, you should not attempt to do any of the things you see me doing. Always read and follow the manufacturer’s safety guidelines before handling tools. Seek professional advice and training before using any tools or equipment. Never operate any tool without wearing the proper personal protective equipment. Final warning, Do not attempt to do any of the things you see me doing!

Развлечения

Опубликовано:

26 авг 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 71

@BrandonLund 2 года назад

MORE WELDING AND FABRICATION VIDEOS HERE:ru-vid.com/group/PLfbf78fMz9Vol0uX2-GNc6mLi75zpqb5f LEARN HOW TO WELD VIDEOS HERE:ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-ADa1I319GJ0.html MIG WELDER yeswelder.com/products/mig-welder-mig205?ref=BRANDONLUND

@barryphilrush719 2 года назад

Nice , enjoy your Grandson Shelves , Great Job , he a Lucky Boy , too have a Cool Grandpa 👴 !!!

@BrandonLund 2 года назад

Thanks 👍

@MyBsquared 2 года назад

Always great videos with achievable projects for the novice welder. Fridays now are the start of a creative weekend, thank you.

@BrandonLund 2 года назад

Thanks man I appreciate your support! @MyBsquared

@olddawgdreaming5715 2 года назад

Nice LADDER oops I meant shelving unit you built. Your grandson will really enjoy it and find the use’s soon enough. Might consider tabs to keep the shelves from being lifted by accident? I really like the way you answered the out of square problem right away. Hope nothing got frost bit with all that slapping 🤫🤭🤣🤗. Stay safe and keep up the good work and videos. Fred. 🙏🏻🙏🏻👍🏻👍🏻👏🏻👏🏻✋🏻✋🏻

@BrandonLund 2 года назад

Hey Fred thanks buddy! I'm sure it won't be long until he figures out he can use it as a 🪜lol we still might do some 2 sided tape. Have a great weekend buddy :)

@MinionsSmithy 2 года назад

Love the way it turned out! Simple, yet elegant!

@BrandonLund 2 года назад

Thanks man! 👍

@caracarametal 2 года назад

I really appreciate all the tips you provide! So incredibly helpful for a newbie metal fabricator. Today I learned how to cap the ends of square stock! Thanks for describing your grinding methodology. Lots of folks show themselves using different wheels but rarely explain why and how they use the different wheels/abrasives.

@BrandonLund 2 года назад

Thanks Ryan I appreciate your support :)

@TheRealSlowhand 2 года назад

Simple project, but very nicely done Brandon...

@BrandonLund 2 года назад

Thanks man. I like these projects too from time to time. They dont take up a lot of our valuable time and the benifits and organization are a huge plus.

@JimmyLee0757 2 года назад

DUDE, that turned out awesomer than awesome! I can't watch them live but look forward to the Friday evening videos.

@BrandonLund 2 года назад

Thanks man! My grandson saw it for the first time tonight and just stood there for about 15 seconds with a big grin just admiring all his things that have been buried in the bottom of his toy box that he forgot about

@JimmyLee0757 2 года назад

@@BrandonLund AWESOME

@guyanderson3042 2 года назад

Nice build Brandon, and you couldn’t ask for a better fit in that corner 👍

@BrandonLund 2 года назад

Thanks Guy. Yah that corner really needed this and it makes his room look so much bigger now that its organized

@f1mikeyboy 2 года назад

Awesome Brandon, thanks for the video.

@BrandonLund 2 года назад

Thanks for watching!

@paulp96275 2 года назад

Great job your walls are true fantastic it must be near Christmas I see you let the wife help in the workshop it’s very cold in England also 🥶stay safe 👍👨🏻‍🏭🇬🇧

@BrandonLund 2 года назад

Thanks Paul yes we are looking forward to it for sure! Happy holidays!

@reinhardburkholder590 2 года назад

Another great build, love your videos, thanks.

@BrandonLund 2 года назад

Thanks buddy I appreciate it!

@randygoble1126 2 года назад

Really like the practical projects you build. I’m getting ready to build the target stand. Keep up the good work. The links you provide are very helpful at times

@BrandonLund 2 года назад

Awesome, thank you!

@ricko5123 2 года назад

Good job Brandon and good 2 see you again. I came up with an Awesome rack to hold my grinders and that was to give away all the boxes of grinders I've owned from my old shop and keep only 1 or 2 of each. After years and years of machining and fab in the shop you collect so much shit you don't even realize it, lol...Take care buddy and keep teaching the young folks techniques as they are our future as well all those that just want to learn how to do it...

@BrandonLund 2 года назад

Thanks man I appreicate you watching and sharing 👍🙏

@Farm_fab 2 года назад

Brandon, this would have been a good time to discuss building jigs and fixtures for welding. I had a Suzuki Samurai that I bought from a seller, and had to make a front bumper for. Apparently she struck something when she was on a bender, and I had to make one. I should have used dom pipe, but I used steel water pipe. It turned out well as for looks, but when a man stole a car and ran it into my vehicle that struck the one in front of me, I found out it wasn't as strong as I thought. I capped the pipe ends as you did here, and I made it look like solid 1" round stock. Keep up the good work.

@BrandonLund 2 года назад

Thanks man! reminds me of the one and only time that I built a 4x6 front tube bumper for an old beat up Toyota pickup I bought. I ended up capping the ends and used it as a portable air tank then came up with the idea to add electric / hydraulics and a lift arm for raising pipe for welding pipelines. It worked pretty slick until eventually I taco'd the frame lol

@earlcavenaugh6459 2 года назад

Nice project Brandon!

@BrandonLund 2 года назад

Thanks Earl!

@hammie354 2 года назад

Love your video's Brandon

@BrandonLund 2 года назад

Thanks Eric I appreciate it!

@AntonioClaudioMichael 2 года назад

Came out very Nice Brandon Looks Good 👍 sweet project @Brandon Lund

@BrandonLund 2 года назад

Thanks buddy! 👍 🙏

@raycanchola1670 2 года назад

I came across your name from yeswelder and the comment you made about the welding hood and yes I would like one of those

@BrandonLund 2 года назад

Thanks Ray! Here is the YesWelder hood that I have yeswelder.com/products/auto-darkening-welding-helmet-eh-302c-cb?ref=BRANDONLUND

@jimmacsuga2592 2 года назад

Nice finish, Brandon, and what a nice addition to your Grandson's room. Good advice about smoothing things out all over. So look forward to your videos. Been telling friends about your channel!!!

@BrandonLund 2 года назад

Thanks Jim I really appreciate your support! We do have a great community here.😁🙏

@TimsWorkshopTJY 2 года назад

Great tutorials on welding. Will definitely review when I ever start welding. I need so much to get to where I want to be but plan on simple projects first

@BrandonLund 2 года назад

Thanks man!

@jakeschisler7525 2 года назад

I worked in a factory for 37 1/2 years and for most of those years there wasn't any kind of protection. I started off in the cutting end, where I even worked around and on shears. Cutting up to one inch of steel. That was very noisy, machine shop, and where they built bodies and frames on the overhead for me. Not till the last five years did the company change it's ways. So now all I hear is ringing. At home I wear ear protection when I can.

@BrandonLund 2 года назад

Sorry to hear about that Jake. I know just mowing the grass I will wear headphones (now) and once I'm done mowing it is so nice to just be able to hear. I think most of us take safety for granted then we get older and it starts to matter. Thats how it was for me anyways.

@ChristopherSalisburySalz 2 года назад

Turned out awesome! Fun to see your beautiful sweetheart in the video!

@BrandonLund 2 года назад

Thanks buddy I appreciate it! She never really likes to be in my videos but she's starting to slowly get used to it:)

@stoneypointbouldering2282 2 года назад

My "go-to" for tips and tutorials. Thanks! How do you manage keeping projects like these from warping? I'm on a flux core setup and always seem to deal with some sort of warping.

@BrandonLund 2 года назад

Thanks man I appreciate it! Thats actually a really good question that I should probably talk about in an upcoming video. Most of the time I have a "feel" for how the metal is going to repond when I weld it. Basically I get it tacked "perfect" but because it never ends up perfect there is always one side that needs to go just a little more. That is the side I weld first because the weld will pull the piece, then I go to the opposite corner to pull in the other direction. It probably sounds complicated but I will make sure to show it in an upcoming episode. Great question, thank you!

@bazkeen 2 года назад

No welder ever said, I have too many welding machines 🤣🤣 Just out of interest, have you looked at any of the Fireball Tool squares? Great if you can't use your table, for keeping things square. 🤣🤣Nothing like the Missus to keep you in check 🤣🤣

@BrandonLund 2 года назад

I have Basil. I've actually thought about building a set as a DIY project but I just haven't come up with a foolproof way to ensure they are square. I'm confident I could pull it off but it's coming up with a simple jig for repeatability that has me stumped.

@bazkeen 2 года назад

@@BrandonLund 🤣🤣Exactly what I thought of. In the mean time I bought a set. Great piece of kit

@BrandonLund 2 года назад

I've heard really good things about them!

@aarontheamateur 2 года назад

You said you wiped it down with mineral spirits and then did you also wipe it down with paint thinner? Can you maybe put a link for what you used to wipe it down? Also, do you throw everything you used with the mineral spirits into your airtight metal garbage can? Do you throw your little rag you used with the paste wax in that as well?

@BrandonLund 2 года назад

The paint thinner and mineral spirits are one and the same. This is what I use. amzn.to/3lDwDUZ I throw everything that's petroleum based in an airtight metal can and I believe the paste wax is also. The rag I wipe it on with just stays in the Minwax can and the rag I buff with gets tossed out in the metal trash can.

@ricko5123 2 года назад

Oh yeah, I meant to say I Smell Bacon,lol...those YES Welders seem to be pretty nice...

@BrandonLund 2 года назад

Right on brother!

@ProleDaddy 2 года назад

Things start getting erotic about 19:37. Couldn't help but comment. Keep it above board, bro. 😂 Nice work 👍

@BrandonLund 2 года назад

Hahahaha I had to go back and look 🤣🤣🤣

@AntonioClaudioMichael 2 года назад

So your capping the top but not capping the shelf ends 🤔

@BrandonLund 2 года назад

You could if you wanted but its hidden

@AntonioClaudioMichael 2 года назад

@@BrandonLund yeah I saw that at the end against the wall

@torowazup1 2 года назад

👍🏼👍🏼👍🏼👍🏼👍🏼🍺🍺😎

@BrandonLund 2 года назад

Thanks Max! 😁

@AntonioClaudioMichael 2 года назад

Was that your sister helping you? @Brandon Lund

@BrandonLund 2 года назад

Lol my wife :) she will like this. People usually acuse her of being older than me when she is actually a couple years younger so she will appreciate this :)

@AntonioClaudioMichael 2 года назад

@@BrandonLund oh cool glad I could make her smile brother

@grege2383 2 года назад

The angle grinder your using is DEADLY if you use it to cut metal. Sooner or later IT WILL KICK OUT OF YOUR HANDS.

@BrandonLund 2 года назад

Which is why it's important to know how to use the tools you buy as well as your ability and skill level. No different than shooting a gun, riding a bike or driving a car. It takes practice and focused attention

@Farm_fab 2 года назад

@BrandonLund 2 года назад

Thanks man yah I like the looks of capped ends. I think it really adds a finished look and makes it appear more durable as you mentioned.

@BrandonLund 2 года назад

Thanks man yah I like the looks of capped ends. I think it really adds a finished look and makes it appear more durable as you mentioned.