Milton "High Flow Pro" Air Line Fittings & Couplers

Подписаться 99 тыс.

Просмотров 7 тыс.

50% 1

Check it Out!
Colorfit, V-Style, HighFlowPro, what's it all mean?
Today we'll be looking at these awesome ‪@miltonindustries1166‬ air line fittings and couplers, and I'll be explaining what makes these the best!
BUY THEM HERE;
amzn.to/3O3pr1V
Kits used in this video: S-305VKIT & S-314VKIT
Not sponsored (Milton hook me up!) they make all kinds of awesome air tool related products and much more, so if you'd like to check that out, click here: miltonindustries.com/
Check out more of their fittings: miltonindustries.com/collecti...
_______________________________________________
If you enjoyed the video, hit LIKE & SUBSCRIBE!
New videos every week!
Get up to 3 Months FREE NordVPN with this sign up link; ref.nordvpn.com/VDyPaQedOsk
Lube-Shuttle: www.lube-shuttle.ca/ (Promo Code ELIMINATOR for 5% OFF)
SOCIAL MEDIA:
/ elmn80r
/ eliminatorperformance
/ elmn80r
/ eliminatorperformance
DONATE:
paypal.me/ELMN80R
Bitcoin: 1NYgPvcvBWuhGRewsLE4Scy1cbzwndh5hZ
2ND CHANNEL:
EP Vlogs: / @eliminatorperformance...
GEAR:
Camera: amzn.to/3MqXvUx
Camcorder: amzn.to/3MJqi8n
Tripod: amzn.to/3BMuy0I
Microphone: amzn.to/3Wq4FNp
Cheap Mic: amzn.to/43gcLKN
Old Headphones: amzn.to/45kl6im
New Headphones: amzn.to/3OpK2PD
Headphones for Music: amzn.to/3olPI2t
Editing Software: amzn.to/3OvpR2W
Photoshop: amzn.to/3OxgS1a
MUSIC:
Intro/Outro Music: Burnt - Jingle Punks

Хобби

Опубликовано:

8 июл 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 72

@EliminatorPerformance Год назад

BUY THEM HERE; amzn.to/3O3pr1V

@georgenettlesjr1466 4 месяца назад

Yes sir I did it I thought my impact wrenches with no good it was the cheap fittings I'm almost scared to master trigger it's so powerful now!! 😂😂

@Pete.Ty1 Год назад

👍👍👍. Thank you for another product that's worth looking into.

@EliminatorPerformance Год назад

I like to share interesting stuff that I actually use, thanks for watching!

@knighthawk86855 Год назад

I have them on all my air stuff, shops, and mobile, they are awesome.

@waynestefinashen239 Год назад

Agreed

@kevinhintz1903 Год назад

Been using these Milton type V connectors for 20 years, a hot set up if you’re painting with HVLP spay guns! Or providing lots of air for abrasive sand blast cabinets too! Volume = maximum efficiency and power!

@EliminatorPerformance Год назад

Awesome! Good to hear from someone who's used them and tested the longevity/durability. I was planning on doing an update video at some point, but as soon as I hooked up my air line for the 1st time and clicked in, I could tell they were high quality. Thanks for watching!

@waynestefinashen239 Год назад

Great comment we have a portable sandblaster and this equipment with the Miltons will do a much better job. Ours is presently filled with crushed walnut shells.

@kjell-richardlvdal373 Год назад

Great info

@EliminatorPerformance Год назад

Thanks for watching!

@REVNUMANEWBERN Год назад

Alright lazy folks give up that THUMBS UP, 158 folks have already watched but ONLY 39 thumbs up??? Jake ALWAYS gets a THUMBS UP from me even if I'm NOT interested in the subject, his shear production deserves that !

@EliminatorPerformance Год назад

Thanks we appreciate it!

@waynestefinashen239 Год назад

Absolutely 100% fantastic comment Rev

@Turningwrenches85 11 месяцев назад

I'll have to look into this , sounds like a good product right there for the air tools better flow

@EliminatorPerformance 11 месяцев назад

Yes up to 70% more that's quite a claim and I believe it, my tools feel more powerful and seem to work better.

@dennishopp4696 Год назад

Another good info video, All my fitting leak LOL. In fact one is so bad I remove to tool when I'm not using it. This is going on my to do list. Thank You

@EliminatorPerformance Год назад

Thanks for watching, they're definitely worth checking out. Same thing here, I disconnected my tools all the time, got annoyed and bought these!

@LewisMowersandBoats Год назад

Very cool brother 😎 you can hear the difference 👍 and see when you pulled the trigger nice job Jake 😊

@waynestefinashen239 Год назад

Just like the difference between a pellet rifle and an AK buddy.

@LewisMowersandBoats Год назад

@@waynestefinashen239 🤣🤣🤣

@robertmailhos8159 Год назад

That is a great idea for your Air tool's because they are needing All the air because they have to the air pressure plus the cubic feet per minute glad you did this video on this matter of air tool's needing All the air that you can get to them

@EliminatorPerformance Год назад

Absolutely, especially die grinders but even my blow off tool is more powerful now. The more CFM the better in my opinion. Thanks for watching!

@robertmailhos8159 Год назад

@@EliminatorPerformance your welcome Jake and thank you for posting this video on this Air supply matter

@DIYVariety Год назад

Great job jake, every little bit counts. I bore out my fitting whenever i have to change them. Cheers

@EliminatorPerformance Год назад

My couplers were leaking so it's why I changed over them in the 1st place. But oversizing the fittings is a great idea. Thanks for watching!

@hubertrobinson8825 7 месяцев назад

As I'm watching this just a few weeks ago I bought some high flow fittings at Harbor Freight to eventually change out all fittings to that size even the 13gallon on my welding rig

@knighthawk86855 Год назад

I have them on all my air tools, Mac, Ingersoll, Astro, Snap On, and my cheap stuff, and the power increase is awesome.

@EliminatorPerformance Год назад

Good to hear, I'm hoping they last long. $75 wasn't too bad, I'm just happy my fittings/couplers don't leak anymore and can't complain with the volume increase!

@knighthawk86855 Год назад

@@EliminatorPerformance had em for about 2 years now, and no problems at all, they still don't leak, I've spent more then that over the years on em, they are well worth the money.

@henrymurawskibigdogrepair Год назад

Thanks Jake got to get some

@EliminatorPerformance Год назад

They're good, and they don't leak!

@waynestefinashen239 Год назад

You will not be disappointed Hank they work great

@losmoore3358 9 месяцев назад

Great video. I like them fittings. Did the 1/4 Milton coupler fit on your 1/2 hose ? Thank u for this video.

@EliminatorPerformance 9 месяцев назад

Yes everything worked out perfectly! These fittings are great, they flow really well and they don't leak at the couplers!

@waynestefinashen239 Год назад

Well done Jake i actually love the colour coding idea. Now let us put the mathematics to this product. Let's say your hourly rate is $60 per hour which is highly unlikely since i have heard some shops are charging $120 to $135 per hour. But at $60 per hour you are charging out at a rate of $1 per minute. This product works as advertised and appears to provide the 70% more flow and having used these fittings it has reduced my time cutting out decks for weld repair. Reduction from 50 to 70% is reasonable so if the work would have taken 1 hour and now take 30 minutes i just realised a savings of $30 minimum. Basically these fittings pay for themselves in a short period of time. Note: when using the air gun to blow out and dry off carbs be sure to turn down the pressure with the regulator and never blow debris off your clothes these really do increase airflow significantly.

@colt5189 5 месяцев назад

Why not instead pay a little more and go with steel or at least brass?

@waynestefinashen239 5 месяцев назад

I guess that would be ok but we like the colour and so far no issues with wear or air leakage just a great product with superior air flow.@@colt5189

@colt5189 5 месяцев назад

When I upgraded to Milton high flow couplers. I didn't go with aluminum. I went with brass female and steel male. As the male couplers tend to get banged around compared to female that are more protected. Also, I believe they recommend if you put the male coupler in the air tool like impact wrenches, they recommend you go with steel as I guess they take a banging. But I believe they kind of recommend you use a hose extension with impact wrenches so the couplers don't take as much banging.

@waynestefinashen239 5 месяцев назад

We have not had any issues to date with the aluminum grade.

@james10739 2 месяца назад

I had a bunch of harbor freight stuff and drilled out all my fittings a while ago im not sure how much it helped but cant hurt but it seemed like it was a good amount of material removed

@rotarycomptech 6 месяцев назад

Foster has always made the best quick disconnects or quick couplers. Whatever you wanna call him they’ve been around forever.

@cc123456789 Год назад

You're a wealth of knowledge. Do you know who makes Stanley parts? I have a 45 inch Stanley Snowblower, model 45SS I need the worm gear, I cannot seem to find the part number, does anyone know?

@EliminatorPerformance 11 месяцев назад

Not that I know of, Stanley Black & Decker just bought out MTD maybe start there?

@cc123456789 11 месяцев назад

@@EliminatorPerformance i found a place in the US, I need to order the entire gearbox which i dont need. I just need the worm gear. But they dont sell just that.

@tae912 4 месяца назад

Can you use the purple Milton male piece into any non Milton female connector? I know you said you can connect non Milton ones into purple female connector but what about the other way around? My company's shop all have old connectors so I was wondering if I can still use my personal purple male plug into all of them.

@EliminatorPerformance 4 месяца назад

I can test that out tomorrow and get back to you

@nicholasmaguire7468 3 месяца назад

Great video- did you have to make the air hose yourself to get 1/4 fittings on the 1/2” line?

@EliminatorPerformance 3 месяца назад

No we bought it locally it's a retractable hose, and the 1/4 NPT fittings fit perfectly. I'm sure you can get 3/8" or 1/2" hose and make 1/4 NPT fittings fit, might need adapters?

@nicholasmaguire7468 3 месяца назад

But you had to install the fittings onto the air hose yourself right? Hard here to find a 1/2” hose that comes standard with 1/4” fittings much less high outlet

@nicholasmaguire7468 3 месяца назад

Or you are saying those 1/4” fittings will screw right up?

@Jadams0410 6 месяцев назад

Milton V style is the only fitting i use. With tools like dia grinder and air hammers you will norice the difference

@EliminatorPerformance 6 месяцев назад

They've been great!

@Rein_Ciarfella Год назад

Just out of curiosity, Jake, have you done the soapy water test on all fittings after you installed in case there are small leaks you can’t hear?

@waynestefinashen239 Год назад

Absolutely no air leakage not even minor silent leakage.

@Rein_Ciarfella Год назад

How often do you drain your compressor tank? Ever thought about removing a fitting and using a borescope to see what kind of rust might be forming on the bottom of the tank?

@waynestefinashen239 Год назад

Normally during the summer months which are extremely humid once per week provided we have run the compressor that week. During the winter months when humidity is less and the shop heater is running keeping it cozy once every 3 weeks. Find less water during the winter always and Jake and i have discussed doing such a video since this type of tool is a bomb waiting to happen. We have also discussed having it positioned on the other side of the shop wall which is also heated during the winter, thus more protection if it ever failed. Since we have high torque Milwaukee battery operated tools it is rare that we pressurise the compressor to near maximum psi rating.

@MrMcGuy 4 месяца назад

Pro Tip: You do not have to pull back on the coupler collar to connect a tool. Just press together. You’re welcome.

@danielcote4888 Год назад

Allô, quel grosseur de compresseur avez-vous? Merci et bonne journée.

@EliminatorPerformance Год назад

Sorry I don't understand that, but thanks for watching!

@waynestefinashen239 Год назад

Failed French in high school but i think i comprehend. We have a 25 gallon Central Pneumatic air compressor that we purchased at Harbour Freight in the USA on return from a trip to Florida. It will pump up to 150 psi but we rarely set the regulator to that pressure. It has oil in the pump that we change every few years the major thing to remember is to drain the water on a regular basis because rusting internally can cause this air tank to become a bomb when pressurised. Hope this helps. C'est bonne eh? Viva la francais et les habitants!

@motorcoachtech7615 Год назад

A couple of years back, I was talking with a sister coach operator from the US, about how they repair roof water leaks. He was telling me they were using an ultrasonic sound tool that finds the leak in the seam seals. I asked him how he likes it, to which he replied, "I love it, because we had to fix all our air leaks in our shop". Have a good week. Rick

@EliminatorPerformance Год назад

Ha that's a good one Rick, at least he got something out of it. Thanks for watching! Also, it's interesting you mentioned that tool. Port Colborne is currently using an ultrasonic/acoustic listening device to try and track down the source of the towns leaking water pipes. We pay the highest water rates in the region!

@waynestefinashen239 Год назад

A great comment.

@philliphall5198 Год назад

Yea after 20 years I replace them Don’t need high flow, 180 psi is enough for 1 inch impacts

@waynestefinashen239 Год назад

We rarely run our air compressor above 100 psi but then again we have the high torque battery operated Milwaukee impact gun and the Induction Innovation Mini Ductor induction gun to use when nuts or bolts are seized. The higher flow rate does reduce the time when using the air grinder cut off wheels since we only have a 25 gallon air compressor.

@EliminatorPerformance Год назад

Once we switched to Milwaukee I noticed we rarely use the air, but it's nice to have when you need it. Thanks for watching!

@JeepITguy 2 месяца назад

Good lord. Actually having to tell people how to apply tape. It's sad.

@jessecanales9000 Год назад

The problem with this product they are low quality they are made from aluminum they worn out quickly

@waynestefinashen239 Год назад

Well i hate to be the bearer of bad news but have you ever heard of aircraft aluminum? Some high quality fittings Jesse but i am sure Jake will update everyone if he has issues. I have been using these fitting on the air tools for some time now and find that they perform as advertised and save a lot of time which equates to money when your running a business.

@EliminatorPerformance Год назад

I'll have to do an update video later on to determine quality and longevity. I just wanted to share the product in case anyone else had leaking fittings. Thanks for watching!

@EliminatorPerformance Год назад

Also, as shown in the video, they also make these high flow fittings and couplers out of steel and brass!