Mini Me Swap: Honda Civic D15B7 / D16Z6 Head - Parts, Budget, and More!

Подписаться 9 тыс.

Просмотров 71 тыс.

50% 1

Why? What parts do I need? How much $? Tips? What part numbers? I'll answer all of these questions in the video! This video will show what's involved to get that Civic moving a bit faster, while keeping Honda reliability.
Follow Riggs Garage on Instagram: / riggsgarage
Resources for the Mini Me Swap:
Part #s and my paid affiliate links:
VHT Wrinkle Black valve cover paint: amzn.to/2YkIMSu
VMS Cam Gear: amzn.to/3a3MbuE
VMS Plug Wires: amzn.to/3qZglpJ
Timing Belt: Gates T224: amzn.to/3a63nQb
MLS Steel head gasket: Felpro 9915 PT amzn.to/3qUNUch
Intake manifold gasket: Felpro MS 94119-2 amzn.to/39lBpAL
VTEC Wiring Pigtails: Auto Parts Prodigy VTECPLUG2 amzn.to/3a51hQo
Comprehensive Mini Me thread: honda-tech.com/forums/honda-c...
Mechanical timing (what cam gear??) www.d-series.org/threads/how-...
What timing belt?? Belts to use: www.d-series.org/threads/timi...
Wiring up the VTEC: • Honda Civic 92-95 ECU ...
My decent budget camera setup:
Canon Vixia HF R800: amzn.to/3cfjq0D
GoPro Hero 3: amzn.to/3iO7yUy

Авто/Мото

Опубликовано:

17 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 299

@RiggsGarage 3 года назад

Thanks for all the support! If you’re enjoying my videos and you would like to help out so that I can make even better videos, check out the link below! www.paypal.me/RiggsGarage

@nathanhamilton8717 3 года назад

Literally saved my life right here, I have never worked on cars before in my life really, and now I am doing a full rebuild with a d15b block and d16y8 head and I had no idea what to do so thank you for this great information!!

@RiggsGarage 3 года назад

Hey Glad to hear it was helpful! Is it a b7 block? If it isn't just make sure you don't order the timing belt parts that I used lol they will be different since I used Z6 head and a b7 block (I believe)

@nathanhamilton8717 3 года назад

@@RiggsGarage no its just the d15b block, but I just finished my parts list and all of the according parts.

@hisheeelijah1482 2 года назад

@@nathanhamilton8717 man u sure you read to work on engine builds and u apparently never worked on cars b4?

@angelmarquez8464 Год назад

i’m in this exact situation right now down to the t. how did the build go?

@jakeneugent7304 11 месяцев назад

@@nathanhamilton8717JDM BLOCK

@CPurdiePlays 2 года назад

Had no idea this was a thing. Bought my 92 for $600 a few years back and wanting to do some upgrades on it now. I think I'll be adding this to my to-do list for the car. Thanks!

@RiggsGarage 2 года назад

Good deal, easiest time to do it is during your timing belt maintenance project

@alexo1226 4 месяца назад

Great video !! Appreciate you taking your time to share this project.

@RiggsGarage 3 месяца назад

Thanks, hope you enjoyed

@infernoplayer5607 2 года назад

I’m looking at a few non running Hondas to rebuild and mini me build and this is good information! Thank you very much

@RiggsGarage 2 года назад

Nice! Have fun with it

@unproductiveworkshop 3 года назад

Excellent video. Thank you for the links as well! D15B7 equipped Civic owner here.

@RiggsGarage 3 года назад

Hey thanks for watching! Appreciate the kind words.

@mfnxegel5044 2 года назад

Great video bro. Thanks for the info. I plan on doing this exact swap myself

@RiggsGarage 2 года назад

You're welcome. Thanks for the kind words!

@ChronicKush 3 года назад

Awesome video. I'm in the same situation. I picked up a 95 Civic EJ2 (coupe) with a d15b7 for $1000. The clutch was cooked so I got a new one. It sounds like the water pump and timing belt tensioner need some attention so I'm thinking of doing a mini me swap. The body is in really good condition so definitely not bailing on it. This video answered alot of questions. Thanks!

@RiggsGarage 3 года назад

Awesome, glad I could help and thanks for the comment!

@abwolfsto6039 3 года назад

Nice job brotha thank you for Info I just had this link to your video sent to me by a friend I’ll do this in the future

@RiggsGarage 3 года назад

Thank you! Hopefully you have fun with it

@angeluribe2232 5 месяцев назад

Really good informational video I wish there was more out there on more Honda Motors like this I'm trying to find a good video that explains in h2b swap on an eg 😂

@adolfomendoza7954 3 года назад

Cant wait for the ecu swap video, i have some questions about that but ill wait for the video to come out

@RiggsGarage 3 года назад

Thanks! I have the ECU, waiting on wiring harness pins to arrive. I'll post it up as soon as possible.

@RiggsGarage 3 года назад

This video is out if you haven't seen it

@PD-ln2vg 2 года назад

I have a ph13z engine and swap to d15b7 cylinder head and a p2k intake manifold now the engine working in good condition

@joseyking3352 3 года назад

Pure inspiration bro

@RiggsGarage 3 года назад

Do it! Thanks for watching 👌

@zaklovescars 4 месяца назад

sweet video!

@RiggsGarage 3 месяца назад

Thanks!

@RiggsGarage 3 года назад

Just got the new P28 ECU, video coming up soon🔧

@Bluekbizzel_gaming 3 года назад

Wanna sell the p06?

@RiggsGarage 3 года назад

@@Bluekbizzel_gaming probably, need to make sure the new p28 works first though

@Bluekbizzel_gaming 3 года назад

@@RiggsGarage keep me posted.

@Bluekbizzel_gaming 3 года назад

@@RiggsGarage sent you a message on IG

@4theCHIEF4 Год назад

Idk if you looked this up but the d16y8 intake manifold works better and bolts right up. Bigger runners and chamber and you can port match it to the head for better air flow. I did this same thing but i didn't use the z6 head. You can also use the y8 head as well

@RiggsGarage Год назад

Yep, I am using a Y8 intake on the current engine build that I will be posting up more. Definitely proven to make more power and a good stock piece!

@johnsmithnonya46 Месяц назад

I'm buying a super clean white eg hatch with d16y7 with z6 headers for $2500, or include a s300 ECU for another 800 for tuneability. I just pulled the following for $333: z6 head, wiring harness, intake manifold, IACV, and throttle botty (to sell), OEM Honda distributor, fuel rail, and exhaust manifold. Already had the same gasket (you have a gasket now you have to buy a car that uses the gasket!)

@JodBronson 2 года назад

Awesome!

@lmc_motorsports 2 года назад

I'm building the exact same motor set up I'm saving up for rods right now

@RiggsGarage 2 года назад

Awesome! I just got rods and Vitara pistons. Grabbed a $50 engine off of marketplace and machine work just got finished. Sounds like we're on the same path

@armankordi 2 года назад

have a 90 dx hatch d15b2 + auto trans. did a 5 speed Si trans + z6 head (plus machined block + head, arp studs and VMS racing timing gear) with tuning on probably 10.1 compression i make 130whp and 110tq. also revs out to 7800 still gets 34mpg fuckin mint might make a vid soon

@RiggsGarage 2 года назад

That's a great combo, good work!

@mariosandoval4479 2 года назад

Great vid! Quick question though. Is the process the same for a d16y7 block? I’m trying to get some vtec in my bad boy but haven’t really gotten the confidence to rip into her yet 😅

@RiggsGarage 2 года назад

Hi there, thanks for watching! It is super similar. There are a few places that might be different, I would recommend finding a build thread where somebody does exactly what you were looking to do. Some differences might be head bolt lengths since you have a different block and are probably using a Y8 head? Cam gear, which timing belt to use. Otherwise I think it will be pretty much the same project

@benitokillzz4950 10 месяцев назад

what head bolts did you use??? b7 head bolts? im about to do this mini me swap myself. great video by the way!!

@leeman9696 Год назад

Hey I know this is old but I have a d15b7/z6 in the 1992 Honda Civic dx it ran fine for a while but then I drove it and it was bogging down and now I can’t get it to start back up I got a new distributor, fuses are good, new fuel pump and relay, rewired vtec, timing is perfect and I don’t see really any vacuum leaks I’m so lost at this point done spent more money trying to get it to start again then the actual swap lol

@QweeYoka15 2 года назад

This was a big help.. and will I need a different crankshaft for d16 rods and pistons?

@RiggsGarage 2 года назад

Hi, glad it was helpful. In this configuration, you run all stock bottom end, just the d15 block, rods, pistons, crank, Z6 head only.

@pedroarredondo338 2 года назад

Cómo hicistes para poner a tiempo tu motor, tengo un d15b2 con cabeza z6 y no puedo ponerlo a tiempo, gracias

@realitycheck3672 3 года назад

*SWEET! My 91 Si is getting the same swap at the end of the month.*

@RiggsGarage 3 года назад

Sweet! Man, my first Honda was a red 90 Std Hatchback, love the EF platform.

@realitycheck3672 3 года назад

@@RiggsGarage 90-91 best model year. I’m also painting the EF Nardo. Crazy thing is in Vancouver a paint job costs $4800. But the farther east you go the cheaper it gets. I found a hot rod builder with 40years experience in Abbotsford about an 1 1/2 half away from my home, he’s painting it for $1800.

@RiggsGarage 3 года назад

@@realitycheck3672 nice! I'm also hoping to paint mine next year, well this year now. Looking to spend under $1000 doing most of the prep myself and an expert friend shooting in his booth, but $1800 is great if they are doing prep and all the work

@realitycheck3672 3 года назад

@@RiggsGarage Later on, way later on I’m planning on getting a SpeedFactory Racing cam

@RiggsGarage 3 года назад

@@realitycheck3672 also check out Delta cams, they do regrinds using stock cams, lots of guys making 400 plus ponies from the D series (boost of course)

@omararaujo9413 3 года назад

hello friend congratulations for that beautiful project. I made a minime with a d15b2 block and a d16z6 cylinder head and I had good results but I put the injectors from the d14 a4 that I had in the previous engine. I have problems with engine piston. Do you think it is necessary to place some injectors of more volume? Thank you

@RiggsGarage 3 года назад

Hi Omar, thanks for the kind words. What problems do you have with the piston? What computer are you using? I would make sure the injectors, the computer, and the head / intake swap all match up. For example, my computer, injectors, and head are all from the same swap. 240cc injectors, Z6 head, P28 computer. Hopefully this helps you, let me know

@officialvalencia9074 3 года назад

Good vid doing the same build lmao didn’t know people still do mini me in 2021 anyways I got a question if. I port and polish the b7 manifold will it be as good as a z6 or better ?

@RiggsGarage 3 года назад

Good question, but I think you'd have to take a ton of material out of the B7 manifold. As part of the project I did set the Z6 and B7 intake manifold side by side and the Z6 has significantly fatter intake runners. I would go to Pick-N-Pull and grab a D16Y8 intake manifold, they're dyno proven the best and are available for cheap

@LsB18 11 месяцев назад

Ok I'm a little late but what about a z6 head on a 89 civic si d16a6 block?any info?

@MikeKollin 3 года назад

You're Awesome for doing this! Helps a ton! I have a 95 Del Sol with same engine, D15B7. Mine is leaking fluid / oil into the coolant system and probably into the oil... So not sure how I am going to do this.. might have to just get a D16Z6 Engine... I wanted to do this min me swap for fun though... If I can save bottom 1/2 of engine I will do it...

@RiggsGarage 3 года назад

Yeah the swap is pretty good, but if you can grab a nice running z6 engine swap for for 3 to $500 I would do that, especially if you want to give it a little bit of boost in the future for extra fun. Thanks for watching!

@MikeKollin 3 года назад

@@RiggsGarage Yeah, I am going to start looking for a D16Z6 Engine to put in mph car. It will be cheaper and easier all the way around... OBD 1 is the same, easy to drop in, cheap to buy, and could boost it in the future for fun! Thanks again...

@MikeKollin 3 года назад

@@RiggsGarage Okay, Need your help! Just called 2 places my mechanic recommended to buy engine. They dont' sell the D or B series engines anymore. Any tips on where to look? Thanks!

@RiggsGarage 3 года назад

There are several big JDM engine importers around the country that will ship you a low mile engine from Japan on a pallet that you can just bolt in. I would just Google JDM engine importer, usually pretty good prices. Then you can grab a D15B or some other higher performance engine that will bolt right in where yours is

@MikeKollin 3 года назад

@@RiggsGarage So a D15B is better than D16Z6? And thanks!!

@leeman9696 11 месяцев назад

Ik this is old and you may not see this but could you make a video to touch on the topic of the timing advancement from the deck height it’s kinda hard to find and I think a video on it with the d15 mini me z6 head tutorial send me 7% process 🥸😂

@Camcatchesdinks 3 года назад

Desperately trying to find these parts to start working on my 93 Honda dx 🤣

@RiggsGarage 3 года назад

Keep looking, you'll eventually find a sweet bundle deal like I found. Make sure you can get the head with matching distributor and valve cover, and a better intake manifold than the B7 is definitely recommended too. Good luck!

@bernadine336 3 года назад

@@Beast-mode-dc7jb ef chassis is definitely best candidate for a mini me swap

@CalebTheFluidChanger 3 года назад

I’m doing b7/z6 mini me as well, I’m about a grand in parts not including car price. I’ve got everything set to go, but was wondering if you would happen to know the size of the transmission mount bolts (the 3 of them), and post mount nuts size? That’s about all that’s keeping me from dropping in. Good informative video, love the setup brother!

@RiggsGarage 3 года назад

Sounds fun! I'll need to double check but I would think 14 mm for the transmission mounts

@CalebTheFluidChanger 3 года назад

@@RiggsGarage yeah they’re the same thread as the transmission bolts themselves, and about half the size I believe.

@bawb265 3 года назад

How much horsepower do you think you gained from the mini me? Im considering doing this but Im not sure if it's worth it (in the Netherlands a turbo kit is way to expensive so this is the only way to get like a (big?) bump in power

@RiggsGarage 3 года назад

Hi, thanks for the comment. Realistically probably about 20 horsepower without a tune, but I'm not even seeing that yet because I'm not running the VTEC computer to kick in VTech and give this thing a more aggressive fuel map. I just bought the computer yesterday though so I should have it up soon. That said, an extra 20 or 30 horsepower and a 2000 lb car is a noticeable thing. and it's using all Honda parts so it probably won't fall apart if you do it right haha.

@KapenW17 2 года назад

Long time ls guy here, but I just picked up 91 civic sedan 5 speed and I’m really impressed with all the ways you can swap parts on these little engines! Could you do this swap on a D15B2?

@RiggsGarage 2 года назад

Welcome! They're like junkyard Legos just like LS, you can absolutely do this swap on the D15b2. If you are used to driving fast cars though, you might just want to do pistons and rods and a big turbo along with the VTEC head lol

@KapenW17 2 года назад

@@RiggsGarage this is just my little gas saver! Well hold off on make it fast for a while!

@RiggsGarage 2 года назад

@@KapenW17 that's where I am, I have the pistons and rods to build it mean, but I'm liking the gas mileage and reliability

@KapenW17 2 года назад

@@RiggsGarage wonder how well it would it would hold up to a 50 wet shot? That would be the icing on the cake after the head swap. Bought a z6 head earlier from a buddy that’s doing a k24 swap on his hatch.

@jnino956 Год назад

Where do you think is a happy medium? I like my gas mileage and enjoy the driving experience but performance wise it’s lacking for me a bit. I hav a fully stock 97 CX D16 but would atleast like to add just a little bit more pep to it 😅

@rauelramos2212 2 года назад

I have a jdm d15b block with a z6 head... it has the stick z6 cam gear and people say i need the y8 cam cause it rets ignition timing 4.5°

@RiggsGarage 2 года назад

Check my comment on your other post 👍👍

@victorflores6363 2 года назад

Great build and video! Doing this build to! Almost have all the parts, hopefully be done by end of may 2022! Quick question, did you reuse the b7 head bolts or get new ones?

@RiggsGarage 2 года назад

I refused the B7 bolts. Might throw some head studs in there if you're planning on throwing boost at it. Thanks for watching!

@victorflores6363 2 года назад

@@RiggsGarage ok thanks for the reply, maybe in the future I’ll go for boost! Are you upgrade studs for the boost on yours? If so what brand?

@RiggsGarage 2 года назад

I'm building a different short block with pistons and rods so it will live longer hopefully. Using ARP head studs, 208-4301 I believe

@victorflores6363 2 года назад

@@RiggsGarage ok nice! Saw the video , wish I had time and space to do that! I just got ahold of some arp studs, used but good condition. They are very hard to find. Thanks again for they reply man , good luck with the build! 👍🏼

@RiggsGarage 2 года назад

@@victorflores6363 good work, I think they will be in stock again soon

@Raibana.k 3 года назад

Im lowkey getting some hsg vibes with this guy

@RiggsGarage 3 года назад

Not sure what that means, but maybe thanks?

@RiggsGarage 3 года назад

High school graduate? That's me

@Raibana.k 3 года назад

@@RiggsGarage the way you talk and explain how to do a mini me reminds me of another channel Honda Street Garage nonetheless i enjoyed the video very informative.

@Raibana.k 3 года назад

@@RiggsGarage 😂

@RiggsGarage 3 года назад

Ahhh cool, I'll check that channel out! Have a good night man

@davidclagg7240 Год назад

What about the oiling system for the VTEC

@RiggsGarage Год назад

I covered that in the video, you just need to remove the oil restrictor so if you VTEC gets full flow

@Bluekbizzel_gaming 3 года назад

I'm gonna be doing this but with a y8 head

@RiggsGarage 3 года назад

Have fun, those are great heads👌

@jojomate2042 3 года назад

Hi it is a great video

@RiggsGarage 3 года назад

Thank you!

@jaebae5706 Год назад

You might have said already but do I need vtech manual transmison if I do this to my 2000 Lx manual ?

@RiggsGarage Год назад

Do you mean do you need to swap transmissions to do this? You do not need a swap transmissions. What I covered was if you have an auto transmission, you need to make sure you have an auto transmission ECU. Vice versa, if you have a manual transmission, you need a manual transmission ECU. Is that what you mean?

@jonathangibson2482 Год назад

I'm doing the same exact mini me. I'm trying to figure out if the vacuum lines are all ran the same as the the d16?

@RiggsGarage Год назад

Pretty much the same, I changed nothing on this swap

@MidnightVibesMedia 2 года назад

I’m seriously considering doing this to my 94’ EG sedan. Hopefully do a manual swap while everything is out and boosting it. What transmission would you recommend for this? I’m a Toyota guy so Honda’s are kinda new to me haha

@RiggsGarage 2 года назад

If you don't have a transmission yet, people usually recommend an SI or an EX transmission, they have shorter gears and more zip. I have the DX transmission which is excellent for commuting because I can go down the highway at low RPMs.

@MidnightVibesMedia 2 года назад

@@RiggsGarage awesome thanks!

@bruhmoment1493 Год назад

Hey man, I recently got my swap running d15b7 block Z6 head. Everything was timed correctly and valve lash was set properly but it smelled really bad, I assume this has to do with the timing problem because of the deck height. Fortunately I also have a VMS cam gear on my swap, I was wondering if I would advance it or not and how much to advance it to. I’m also running a P28 base map.

@RiggsGarage Год назад

Smell, not sure if that's anything to do with timing. You'll need to mechanically time it with a timing light. That's when you'll advance or retard the vms cam gear (if any). Is it running strong now?

@rauelramos2212 2 года назад

I have a quick question i have a jdm d15b with z6 head, im still not sure if i need the y8 cam cause apparently i have the obd1 d15b block which u dont need the y8 cam but im not 100% sure?! I have the distributor is fully advanced and the ignition timing is in the negatives

@RiggsGarage 2 года назад

So there are some differences here - My video is about the D15B7 bottom end, which has a different deck height than the D15b or the D16 that requires a different cam wheel. If you have the D15b JDM engine bottom end, it came with the Z6 head (same casting number), so all you need to do is use the same cam gear that came on the D15b setup (or an adjustable cam gear). Sounds like you may just be a tooth off in your case, because the D15b has the Z6 head from the factory, so timing should be right on. Make sense?

@rustythompson2526 3 года назад

i enjoyed your video. could you show a update with your car and mini me. im building one to.

@RiggsGarage 3 года назад

Funny you asked, I'm filming the new VTEC wiring and new ECU install right now. Should have it out in less than 5 days

@RiggsGarage 3 года назад

Rusty, the video is out

@domingson Год назад

I am going to do exactly the same thing, but according to you experience. So i won’t able to use the same distributor from the d15? Engine? What about intake and exhaust manifold? Where are you located? I Might need your help for this

@RiggsGarage Год назад

Intake and exhaust will swap over, you will need to use the distributor that goes with the head.

@rauelramos2212 2 года назад

I have a jdm d15b block with a z6 head, in swapping another z6 head cause my valves in #4 are bad so should i use a y8 headgasket for more compression?

@RiggsGarage 2 года назад

It will give you a slight bump in compression, not worth taking the head off for to replace the gasket, but if you are already doing it, it is a factory upgrade.

@MiloFrameZz 3 года назад

Are you able to use the stock z6 cam gear with the head when doing the mini me ? Or is it mandatory for adjustable cam gear

@RiggsGarage 3 года назад

Good question - read this thread I posted above and see of you get the same thing I got when I read it (it's well written, but kind of confusing) - he says z6 head use a y8 gear and advance belt 1 tooth. This is why I got the adjustable for $50 and I can mess with it without having to swap gears and take belt on and off. The $50 is worth it to me to save hours of messing around, plus finding a different gear that I don't have. www.d-series.org/threads/how-to-mechanically-time-a-mini-me-swap-other-mini-me-info.166652/

@RobiTsx 3 года назад

Yes You can

@WannabeWRX 3 года назад

If you're putting a z6 head on a d15b block (except for the JDM D15b vtec one), then you need either the adjustable cam gear or the y8 cam gear and advance a tooth. The z6 head on a d16y block reuses the z6 cam gear - and all of the z6 timing components. I'm currently running z6 head/y8 block in my hatch.

@dantipping6063 Год назад

Hi I’ve have a d15 with d16 head turbo I changed my boost valve to a smart turbo one after about 80 miles my car speed stopped working and now it won’t rev pass 5000 rev so no boost no vtec please I need help I can’t find the problem

@RiggsGarage Год назад

Sounds like there's a lot going on here, I probably can't be too much help. If it's not making boost, then there could be a boost leak or your wastegate is open. Is it throwing any codes?

@_-Sparky-_306 10 месяцев назад

Got a question maybe you’ll know. Currently putting a mini me swap it’s a ob1 distributor but I have an ob2 ecu and harness any idea how to wire up or make the distributor work with the ob2 harness

@jaymoney9938 2 месяца назад

Same problem did you ever resolve ?

@joshuacardona3935 2 года назад

I have a ‘96 EJ8 w/mini me D15b w/D16Y8 head uses the timing belt from my y8 with no issue also have the adjustable sprocket and only needed to use the alternator belt of a D15B. It’s a nice lil combo and my Vtec cracks the block already had the oil jet removed as it is required for the good’ol Vtec Now in all seriousness what would be the best trans to use for the mini me?

@RiggsGarage 2 года назад

From what I've read the best ratios are in the EX and SI transmissions, I am currently looking for one as well! It gets rid of the tall first and second gears that make your acceleration really slow with a DX transmission

@joshuacardona3935 2 года назад

Hell yeah perfect I have the correct one on there then, and I have a spare one also man. If you need it I got you

@RiggsGarage 2 года назад

@@joshuacardona3935 where you located??

@joshuacardona3935 2 года назад

@@RiggsGarage in the DIRTY DINO S.B

@francescosuarez 2 года назад

I have a d16A6 will the z6 head hit the pistons since that’s what the mechanic said it might be doing even after a valve slash

@RiggsGarage 2 года назад

Not sure. In theory, there is no reason why they would unless cam timing is way off and pistons hit valves. You could put it on there and add modeling clay on the piston, time it, make sure it's ok

@JM-jq2mu 3 года назад

I'm guessing you can also do a mini me swap with a d15z6 VTEC e right?

@RiggsGarage 3 года назад

Likely, I haven't looked into it. Honda is like Legos though, just need to work out the details like what gaskets and head bolts to use. Generally you use the same timing kit as the short block. Thanks for watching!

@JM-jq2mu 3 года назад

@@RiggsGarage no problem and thanks for the reply

@NovaZocket52 2 года назад

Do you think this would work well with vitara pistons and rods and a turbo?

@RiggsGarage 2 года назад

Heck yes it would, better head, better cam, better intake, VTEC. Thanks for watching!

@gtgodbear6320 2 года назад

I thought it was called an LS/Vtec. Non VTEC bottom/VTEC head. Or is that just for the B18?

@RiggsGarage 2 года назад

LS VTEC is referring to B series, correct

@anthonyjohnson2570 2 дня назад

Can i put a d15b7 VTEC in a 1999 honda civic pisron rod blew on my d16y8 engine???!!!! Help?!!!

@RiggsGarage 2 дня назад

Yes. Run that VTEC head on a B7 bottom end with your stock ECU

@cxnito2157 3 года назад

Can I do a d16y7 bottom end and a d16y8 vtec head ??

@RiggsGarage 3 года назад

Pretty sure yes you can, may be slight differences from my B7/Z6 combination though.

@bubblesmcgee1474 Год назад

Would this be universal for any d15 vtec swap onto any d15 engine? I have a d15b2 and im wanting to put a d15b vtec head on it

@RiggsGarage Год назад

Pretty much yes, there may be variation in your fuel injection setup (mpfi swap if needed) and the head bolts you use need to be the head bolts for the head you are using.

@Solid_Steak 7 дней назад

Did you have to remove the oil squirter out of the B7 block so vtec would work heard someone say do you have to remove it or vtec won't work

@RiggsGarage 5 дней назад

Definitely need to rememove it

@Solid_Steak 5 дней назад

@@RiggsGarage I thought so

@rauelramos2212 2 года назад

So i have a d15b block with a z6 head, apparently i need the y8 cam gear but do i need to advance it a tooth? If so can someone make a video HOW to 😭

@RiggsGarage 2 года назад

Check my comment on your other post 👍👍

@317travis-6 3 года назад

Need a little insight if you don't mind.... I recently bought a 97 EJ6 "EK" hatchback. The guy I bought it from Only knew that it was a jdm d15b. When checking it out seen the p2e ecu along with a top mounted TB on a older intake manifold and assumed it was any old non VTEC d15b. Got it home and realized the head is a p2j-6 "97" y8. Last 3 owners have dailyed this car on the exact setup. (Guessing 2-3 years as last guy said he's been daily driving it for a year) Do you think it was purposely setup like this for a reason Im just not understanding/ or comprehending? Or do you think it was just thrown together good enough to get it driving and passed on to the next guy? Also would it be worth trying to save the cluster fuck of unhooked wires and plugged hoses with a proper intake and chipped ecu? Or just pull everything and start my own build once this one pops? SORRY I KNOW IM ASKING A LOT!!! But any insight or knowledge you could pass along would be greatly appreciated!!!!

@RiggsGarage 3 года назад

What does the block say? D15B? That plus the y8 head would be solid Might see what intake is there, I'd grab a y8 throttle body and intake from the yard and use that if it has a top mount intake (y7?)

@317travis-6 3 года назад

@@RiggsGarage Yes the block is stamped D15B.

@brisevans8976 2 года назад

How you doing boss, quick question, . I have a d15b7 block and i plan on doing the mini me head to the motor. Using a d16z6 head. Now on the d15b7 motor, i noticed that the crank pulley does not have the pulley to run power steering. although the d16z6 crank pulley can run power steering.. My question is about swapping the crank pulley. the d16z6 crank bolt is 19mm socket, and the d15b7 crank bolt is 17mm. Is it possible to put the d16z6 crank pulley on the d15b7 block that way i can run power steering. I've looked but cannot find the info.

@RiggsGarage 2 года назад

That's a great question, I am 98.41% sure they will interchange, however they are different weights. I'm not sure if the balance is different, that could jack some stuff up if the balance is different. I would do some deep digging on d-series.org forums, the sacred texts 😂

@brisevans8976 2 года назад

@@RiggsGarage hahaha 98.41%, thats funny. I still couldn't find the exact info but I heard people say that d16y8 pulley will work fine and is actually better anyway as the y8 pulley is an actual harmonic balancer compared to the other d series pulleys, that aren't harmonic. Thank you for the reply!

@alevxzx 3 года назад

Amazing! How did your mileage change?

@RiggsGarage 3 года назад

I haven't really noticed a change, however it still has the wrong computer, I'm driving the car differently and less since covid has affected my commuting. So I can't really answer the question accurately haha

@brandonhill88 2 года назад

I have a d15b with 260,000 miles and the head gasket went, so I put a new gasket on with a d16z6 head. I just filled up today and got 37.77 mpg. Stock the best I got was 36mpg. But I did also rebuild my transmission at the same time.

@JDSol Год назад

@@brandonhill88did you use a z6 belt and cam gear? I have a 40k d15b block and I'm trying to get a z6 head on but it won't stay in time and start

@donniemcwatters4509 3 года назад

Riggs garage any advice for a newibe I’ve got a 97 hatch with d15b7 z6 mini me swap in my car right now got to pull head and all off to make sure when I broke the belt tonight while crusieing tonight bout 30 mph that I didn’t damage anything and make sure I get it right might take me a while to get it back but it will be back..

@RiggsGarage 3 года назад

Dang that's no fun, when I slipped a timing belt on my B7 head the valves all looked good, but several were bent when they were pulled out of the head and rolled on a flat surface. I'd recommend pulling all the valves out, rolling each one, and replacing the bent ones, then reseating them. I don't have time for that so I a machine shop $200 to go through the head and make sure it was flat and reseat the valves etc

@donniemcwatters4509 3 года назад

Riggs garage got another ? Buddy my brother is doing a mini me swap in his car to he’s going to go with a y7 or y8 head on his b7 block he said whatever head he can get faster but he was wondering if he will have to have the timing advance like and on the d15b7 z6 head do u have to have advance timing on tht to

@salrivera7578 7 месяцев назад

Bro i was going to ask you what you think that set up with a 272 cam head bore mild and no vtec at all all motor i know the compression will be around 10.1-5 probably and probably with lighter flywheel gd clutch and 2 in free flow exhaust system should be a nice i think the d15b2 will wake up big time and be fast on a crx and the reason for no VTEC becouse the cam will be pulling hard hard from 2500 or 3000 rpm on what you think

@RiggsGarage 6 месяцев назад

I bet it will be pretty darn peppy and reliable I don't think fast would be the word, but it would be fun

@salrivera7578 6 месяцев назад

@@RiggsGarage yeap is peppy amigo I I build it no long ago with y8 head gasket and po8-3 head and 272 Delta cam regrind 10 pound flywheel stage 2 clutch kit plus I let the pmg-fi system duel point and I can tell you the sound is beautiful I took her to 7200 rpm no gas problem pull gd better than a Weber carb plus I made adjustments to the distributor I think I'm around 10.1 to 11.1 compression peppy like hell in mid rpm it becomes a beast real fast amigo 3 gear 100 miles a hr and still have rpm left what happened is that the segundary manifold runner is shorter than the primary in the pgm-fi perfect for higher rpm but the sound of the cam is unbelievable nice like a old school v8 mustang nice people are wrong about the pmg-fi is a Weber carb with out the bowl or float and work nice on high compression amigo thanks

@salrivera7578 6 месяцев назад

@@RiggsGarage I bet my CRX with a small 4 barrel EFI system will be something else for what it is and such system can be found in junkyards and can be done with a carb adapter will be something new with bigger cam and springs and retainers really it can be done to really jjjj 😁

@karlosmayo 2 года назад

can you swap a z6 head on a d15b8 from a cx model I heard parts might not line up?

@RiggsGarage 2 года назад

I'm not familiar with the b8 sorry. I would recommend digging into the D series forums for that one. Thanks for watching!

@kaidyncalairo8652 2 года назад

It I can’t get the vms cam gear what else can I uses

@RiggsGarage 2 года назад

I would get a better one, AEM is what most people use. The really cheap ones are known to break a lot, be careful it's a disaster

@lmc_motorsports 2 года назад

I'm doing the exact thing to my car buy I must have broke a ring while installing it cause it lags around 3k rpm and it smokes too

@RiggsGarage 2 года назад

Broke a piston ring?

@princevegeta8901 5 месяцев назад

Do I use head bolts for a b7 or z6? Or are they the same?

@RiggsGarage 5 месяцев назад

Same. B7 bolts used to bolt down the Z6 head perfect

@TheSebasss652 Год назад

Hello, did you keep the PM3 pistons? THANK YOU

@RiggsGarage Год назад

I kept whatever came stock in the D15B7

@TheSebasss652 Год назад

@@RiggsGarage Ok great, thank you for your answer 😉👍🏻

@rendiix4269 2 года назад

Man i have a civic 91 d15b2 dual point. Im going to rebuild the engine but can i install a d16 head and still run normal?

@RiggsGarage 2 года назад

There is more to it than what is it my videofor that engine. You can run the head. However that is an OBD0 engine, that is not multi-point fuel injection engine. Also the z6 head uses an OBD1 distributor. So you will need to convert the engine to multi-point fuel injection and convert it to OBD1 and run a VTEC p28 computer. There is some additional wiring and stuff to do but it is very possible

@francescolonghi2777 3 года назад

Yo do you know a thread or some guida to do the same thing on a d14

@RiggsGarage 3 года назад

I don't, probably search dseries.org forums, I bet there is something there. Thanks for watching!

@zacharyking2606 3 года назад

Where does the FITV coolant hoes run to , I just did this swap and my z6 intake manifold does not have the little nipple next to the big nipple behind Cyl 4 . But the b7 manifold has that nipple I’m lost on where to connect that fitv. Please help

@RiggsGarage 3 года назад

Hrmmmmm....mine was literally all the same, might re-check?

@rebelking4139 2 года назад

can i do this swap on a d14a3 motor and what heads should they fit?

@RiggsGarage 2 года назад

I'm not familiar with that engine, I would recommend you find somebody who did exactly what you're doing and copy their recipe. Thank you for watching

@seantheslump730 2 месяца назад

Anyone got an full parts list for an z6 head on y7 block mini me swap?

@RiggsGarage 2 месяца назад

See the forum link I posted on the video description, should get you mostly there. Just need to determine what timing belt

@seantheslump730 2 месяца назад

@RiggsGarage thank you so much will do, appreciate the reply!

@thomasway3779 2 года назад

Hey i have a 95 si with blown bottom end, i have a d15b7 bottom end, just wondering if there is a way for the engine to run without the adjustable cam gear. would i be able to run it at all maybe without vtec until i get an adjustable gear.

@thomasway3779 2 года назад

i need this car running and im in canada so theres no sites to order a cam gear from that isnt going to take a month to ship

@RiggsGarage 2 года назад

You can definitely run it with stock cam gear. It will only be a few degrees off or so

@thomasway3779 2 года назад

Thank you very much. Got a cam gear anyways don’t want to mess anything up. This video helped tons thanks

@jerongallegos4737 2 года назад

Hey @riggs garage I finished up this same build with the same parts you used, do you know the compression ratio. I’m ordering a chip and need it

@RiggsGarage 2 года назад

10.1:1 with the y8 head gasket

@jerongallegos4737 2 года назад

@@RiggsGarage thanks brother love the channel

@RiggsGarage 2 года назад

@@jerongallegos4737 thanks!

@aaronjoseph9588 2 года назад

what gas were you running after the swap on the stock p28?

@RiggsGarage 2 года назад

Seems to do fine on 89. Compression is 10.5:1 or so, but seems ok

@mateotoppingfuentes5701 2 года назад

What about the motor mounts

@RiggsGarage 2 года назад

Stock is ok, use whatever you want. Still has the power of a factory Honda engine, you don't need aftermarket unless you want it

@donniemcwatters4509 3 года назад

Riggs garage I got a huge ? On the mini me swap on timming the car is my issue I’m running in to I’ve read n read bout it but I’m hearing multi things u got to have the timmin adavance some and I’ve heard u don’t I’m confused

@RiggsGarage 3 года назад

Hey thanks for watching. Right now I'm running it dead straight up, there are several different people that say I should be running advanced using my adjustable cam gear. I need to dig more into it honestly, the car runs fine as it sits, but if I do that and it runs faster than I would be super happy. Check out the link to the forum thread I put in the description and see if that helps you. Let me know what you decide!

@victorflores6363 2 года назад

Hey man just had another question. Need some help on how you did the timing? I read the Honda forum write up but it’s a bit confusing. I bought the same vms cam gear and belt.

@RiggsGarage 2 года назад

Yeah that is confusing. So basically you need to make sure your mechanical timing is showing the timing marks correctly on the harmonic balancer when you're using your timing light. My adjustible cam gear is at 5 degrees retarded to accomplish this. Distributor is right in the middle. This may be because I might be a tooth off and could be different on your engine.

@victorflores6363 2 года назад

@@RiggsGarage so basically everything at tdc like a regular timing belt change. And retard the cam gear to 5 and make sure the harmonic balancer is aligned?

@victorflores6363 2 года назад

I thought you had to advance it, from what the Honda forum said. How are you a tooth off though?

@victorflores6363 2 года назад

@@RiggsGarage I have the same engine, b7 bottom z6 head

@pjburcham5938 2 года назад

I used a z6 timing belt and used the 7 o'clock mark on a factory z6 cam gear. Time it the same way as a z6 just make sure ur using the same water pump for that block. I found that certain ones have more or less teeth

@djcomeup 2 года назад

How to you get oil to the VTEC

@RiggsGarage 2 года назад

You have to remove an oil restrictor in the d15 block, I think there's a clip in there that shows it

@laxativeuser5202 2 года назад

How did you do the oil feed to the vtec

@RiggsGarage 2 года назад

I swear I put that in the video but I just watched it again and it's not there, check the link to the comprehensive Mini-Me thread in the description of the video. You just basically remove the oil restrictor that sits in the block when you have the head off. That allows full oil flow to the VTEC solenoid. That's frustrating, I remember filming that even and I thought I put that in there

@potmaster2617 4 месяца назад

How much hp it give you to mini me swap the d16y7

@RiggsGarage 4 месяца назад

Should get you about to the factory horsepower of the Y8 or the Z6 depending on the head and bottom end you use. Still slow, but fun slow lol

@eduardodelarosa602 8 месяцев назад

Can it be any vtec head or just y8?

@RiggsGarage 8 месяцев назад

Any head really. Z6, y8, d15b etc

@anthonysiano8842 Год назад

Does this work with a D 15 B8 motor

@RiggsGarage Год назад

Yes, the part numbers for the timing belt and stuff might be different though, so do some research before ordering parts

@DanielRodriguez-yh6ku 3 года назад

I got a 1991 Honda Crx swapped with a d15b7 do I need a new computer if I get a vtec head swapp.

@RiggsGarage 3 года назад

You will need an ECU that will run VTEC, like a P28, check out my video covering wiring VTEC for mini me swaps

@DanielRodriguez-yh6ku 3 года назад

@@RiggsGarage Alright man thank you 🙏

@tyleroverhuls4375 Год назад

Will this work for a 91 hach

@RiggsGarage Год назад

Yes, there will be slight differences in what head bolts to use depending on what head you use on the D15B1 / 2 whatever

@fredmercer218 Год назад

Does this work on D15Z8? They’re “VTEC” but not for performance😂

@RiggsGarage Год назад

I do not know the answer to that question. I haven't messed with the z8 before

@AndrewChaiko 8 месяцев назад

Wait.. but z6 is VTEC-E, which stands for econom, so it's not about power.. I have d15z6 civic. It adds mpg on lower loads, but it does not add power on high rev as VTEC does

@RiggsGarage 8 месяцев назад

D16Z6 is the performance engine from the SI, it is not the "E" economy engine, although you can definitely get great fuel economy from a z6

@kurbuy21 3 года назад

Did you use the d7 head bolts or did you use z6 head bolts?

@RiggsGarage 3 года назад

I used the factory B7 head bolts.

@kurbuy21 3 года назад

Yeah cuz I tried just putting a z6 manifold on my b7 and it was running very rich and I don't know why

@RiggsGarage 3 года назад

@@kurbuy21 sounds like one of the sensors is sad. Got a check engine light?

@kurbuy21 3 года назад

@@RiggsGarage no check engine and when I put my stock intake manifold back on it went back to normal but you can look at my channel I posted a short video of what was going on

@lmc_motorsports 2 года назад

Where you located man I need help with my build

@RiggsGarage 2 года назад

Kansas City

@thepenguinlaugh5377 3 года назад

Would putting this head work on a non vtec D14?

@RiggsGarage 3 года назад

Hey thanks for watching, I'm honestly not sure, d14 isn't really a thing around here, we are in the usdm market, that's a European market engine as far as I know

@thepenguinlaugh5377 3 года назад

@@RiggsGarage righttt well thanks the response regardless 😊😊

@frankiearroyo5785 2 года назад

What starter do I use

@RiggsGarage 2 года назад

Whatever the starter is for the bell housing / block combo. I put a z6 head on a manual d15b7, so I need starter for manual d15b7 setup

@user-be8rg1je7w 2 года назад

Can i do head swap for D15B2?

@RiggsGarage 2 года назад

Definitely can, use y8 or z6 head

@kenxiong6830 3 года назад

Wouldn’t it be smarter to just get the complete VTEC single cam motor to begin with? Seems like a lot of headache when you can probably go to the junkyard and pull one out of a Civic EX

@RiggsGarage 3 года назад

That's definitely an option. The word smarter would be applicable in some situations. Junkyard motors are iffy unless you're buying one with a warranty that's been checked out and inspected that came out of a wrecked running car. Then it costs more than the mini me swap. If you had a really clean d-15 short block that is not worn out like mine, you can grab a VTec head for $100 to $200, and slap it on in an afternoon while you're doing a timing belt job. Much easier for the average Joe who doesn't have time or tools for an engine swap. But I would agree that a d16 z6 would be preferred, especially since 99% of the guys that do the mini me swap feel how much power it adds and instantly want a turbo lol. Thanks for watching!

@kenxiong6830 3 года назад

@@RiggsGarage you having to source the intake manifold, TB, ECU, Distributor, etc. I figured might as well just get a complete motor. Not sure where you’re from but over here in California I see the single cam VTEC motors often at junkyards. Most engines live normal commuting lives. I guess since it’s so commonplace here that’s probably why I would get a complete motor. That may not be the case where you’re from. Keep up the vids. Always good to hear what Honda hotrodders are up to

@RiggsGarage 3 года назад

@@kenxiong6830 that sounds great! Thanks for the encouragement. I'm actually looking for a full z6 swap right now since they can take more abuse on the stock rods pistons and crankshaft. I agree, most of them lived a normal commuter life. If the junkyard car has stick on air vents, dragon stickers, a body kit, and a shiny shift knob, I would run though lol

@kenxiong6830 3 года назад

@@RiggsGarage yeah those are the dead giveaways that it’s probably not a motor you’d want. I once did a H22A into a CRX. Holy shit it was fast. Blew the doors off a lot of people lol

@corybeasley705 3 года назад

I'm doing the same but mine will not start at all

@RiggsGarage 3 года назад

Mine did the same. Do you have spark? Triple check timing. The z6 distributor I used had a bad coil. I switched the coil from my b7 coil into my z6 coil and it's working now.