Mobile Welder makes $1,000 in 30 minutes… 

ive patched trash compactors twice for $4k each time. disgusting inside with thousands of giant roaches. just over an hour each repair. they had waste fluid runoff going into the city drain and were getting cited by the city. they accepted my price instantly

If that guy will go right in there without hesitation, he's a definite keeper. Hope you pay him well 😂Norm.

I was a plumber for 11 years, worked commercial and industrial plumbing on a military installation where they trained recruits to permanent party soldiers. Loved the job and the people I worked with but had to quit that profession because I contracted hepatitis B and C. There is all kinds of bad bugs in human shit. That was many years ago. I had all kinds of test and even liver biopsy and all expenses came out of my pocket. At the time my 5 year old son and wife had to be tested along with my youngest that was still in the womb. Government in a crappy way said there’s no proof I contacted it thru work. In other words I got the shitty end of the stick.

I don't understand why they wound not have had it pressure washed of steam cleaned. Nice hat you sent Curtis.

Lol I work at a garbage company and the drivers literally ram everything with the back of the rails.

There’s the old plumber’s quote that applies to you now: “It may be shit and piss to you, but it’s bread and butter to me!”

I remember jobs like that, from when I worked construction. It's disgusting to start, and then..."Oh, yeah, we forgot to tell you..." humorous only in retrospect. Keep making the videos. Takes a bit of time to get your message out there. Great video!

I have a friend where he worked, done work for the city and worked on the water treatment plant and the sewer plant. They took care all their welding and fabrication needs. You are right to charge for all the safety hazards and getting suited up. Most of the time when the water or sewer plant called it had to be done right now so that alone makes the price go up. Just keep up the good work.

I've seen how the drivers that pick up those dumpsters don't care and back into them. Watched one guy hit one 4 times in different spots trying to back up to it with the rails tilted and about a foot off the ground. 4 separate holes on one side because he was at a angle. He got it right when I asked him if he needed me to back the truck up. I mean it's not that hard to back a truck up to one of those dumpsters.

01:34 I'm going to give you another idea on, sometimes, when they drop these things, they push them backwards with the rails.. I know this b/c I've seen it done, the hole's so smooth, it looks like it's some action that is, CONSISTENTLY engaged in. Anyways, that's cool that you earned some money on this job.

Can't believe this is the first video I saw for your channel; hooked since! Lol

You could never be a plumber

For jobs like this you need an apprentice!! 😎

Roll off containers already suck when they're old beat-up and rusted I couldn't imagine welding on one that was full of poopy good job man

Hey that’s the solids bin! I go In those all the time 🤣😂

"I don't care if you worked in a coal mine or a saw mill. You ain't done nothing until you've burned shit'" Go Army.

What a shitty day😂. I rebuilt a conveyor at a water treatment plant that loaded the "cake" as they so affectionately called it into trucks. I wore three pairs of gloves and a tyvek suit all day. Nasty ass job

The big panel on left looks like it has been hit again!

Dude, give that man his journeyman card if for nothing more that having fell in the crap wagon.

yep!!! After doing one of those bins myself $1000 is well earnt money. Also abattoir trucks should be the same.

video only got better or worse the next day, depending on how you looked at it.....Jessie is the man......

loving your videos, Paul in Florida...by the way, that BIN is what in the water treatment biz is called a Turdapottumus!!!!.....I have done a few jobs at the POO Plant...Cheers

Dang On Fire, you stole Mike Rowes's job lol...Oh well, for $1G, money talks and Sh#$%T walks! You earned it on this one. You deserve an EL' STINKADORA cigar for that job!👍👍💪💪✔✔

Rolloff driver here, theres a million legit reason the container could be mishandled. Stuck rear roller, rock preventing it from rolling, stuck on rail wont slide off, in these situations you have to do something. Correctbdriver shoukd be able to handle it, but fucked up equipment is a real thing.

you know you are now on their emergency list :)

Apprentice of the year 🔥💯👌

You should see if they want you to weld armored plates on all of their bins. Couldn’t hurt and probably better to add those than have to pay to get holes fixed.

A driver, hit something? Never!

I use to clean drains for a living,I said we took shit from everyone.

did they back into it again after you did the repair? Looks like a big ass dent in the paint on the new plate.

I'm glad you made the sale. If that's what I think it is, you likely weren't in any real danger. I built a few plants, and I got licensed as an operator. I am curious why no one at the plant could do it? We all had to have a semester of welding class where I went. That was after 20 years as a journeyman industrial sheet metal worker.

I have to repair packers AKA trash trucks. I usually move the diapers, maggots and other hygiene products with a shovel. Just to access the hydraulic lines. Or patch repairs.The juice is lovely 🤮

I think I would’ve just told them to clean it.. Definitely not too much to ask to have them shovel it out and pressure wash it down.

Oh man , I can almost smell it all the way from down under .

Those should definitely be reinforced in the front because sometimes they need to push them cans around to get them in the places

I farted in this confined office while watching this video. It was so much more realistic :D

Shit Bin!!!! This is an aerobic treatment plant. Anaerobic treatment plants still have a strong smell but it's more like strong farm field smell. Can't blame you for bending them over backwards till you leave a crease is a good thing.

I would’ve drive home immediately afterwards and jumped in a hot shower….. for hours. I’m definitely not afraid to get dirty when I work but this is a whole new level of…god I don’t know what. Your apprentice rocks! BTW…just found your channel. Really enjoy your content!

Thats a sweet vise on the back of your truck

i used to do welding repairs in a meat rendering plant..skips full of dead animals turned into oil..fertilizer..etc.. it stank to high heaven and i was only on £7 an hr... broken screwdrives in the bottom of tanks or broken teeth in the choppers... when i was welding it would cook the meat..🤮

You should have hired that maid from family guy to clean that dumpster out fist 😂

Crazy job. The ending was hilarious!

YOu deserve every penny of that $1000..😆😆

Worth every dollar I reckon

Well worth the charge for the dangers, I would have worn a respirator inside the bin and a full face shield over the safety glasses. Never can be too careful. Stay safe and God bless

knowing when to bill a client directly or know they are under a land lord service so after billing them at a prorated rate that smaller fund is taken to other services under that same land lord and exchanged for its corrected capital gains value. IE: guy pays $2800/month to rent a shop space 80% of that is land taxes, so if a quote goes out for $250 on a $1800 job, their are other services in place to sell material at that end job rate tho priced down to the billing quote of licensing... less money exchanged is less tax one has to pay, more things in the way in civil structuring that lure confusion. $800/hr in Alberta is normal, just billing 40/hr... getting around to use it right is to complicated for a first year... bill more and don't get the job... not hard to get $1200/hr off of billing $40/hr. but a $50 7kw generator makes 10kw 280 volt at 75hz, 250amp mobile set up, scrap bins sorting knowing what's what and is not. anything better then a 3rd world set up is a good rig.

They should steam clean it first but it’s not a perfect world

I’ve never heard someone cry and complain so much about easy money.

LMAO dude i laughed my ass off this video. How the eff do you fall down in that shtt man? Id be being super careful lol. I probably would of tried to find some pieces of wood or cardboard to stand on while i was in there also haha.

I don't know how he went inside without a respirator!

The plumbers motto; your shit is my bread and butter!

You doing a great job sir enjoy your video. People or worker always get shit on

Amazing that the plant wouldn’t have their own welder but hey, more dollars for you.

Stop complaining you accepted the job and getting paid good for it .

This reminds me, when I was a pipe layer ,I layed new sewer pipe as the operator of the excavator would dig up the existing while it was in use.

You should have went up to your customer and said" oh dang I got the pool on me" LOL. Joe dirt

Self employed. Taken jobs for an ungodly price. They never go away. You can charge them 3000 for that and yhey will still call. And yes, i understand about doing for good customers. I guess sometimes it suppose to suck. Thanks for the videos.

Hey, it could have been worse and full instead of empty. Lol Good job, one persons stupidity is another persons profit.

Anytime I did repair work on roll offs it was under the condition that they were pressure washed clean...

I am surprised they are allowed to store that out in the open exposed to the elements. Great video 👍

30 minutes plus travel time and so much more. 1K is inflated but not as much as it would sound to non business owners.

Was the Old Spice ad intentional ?? It is interesting to know that we smell things because the particles go into our nose, that means that pices of whatever you are smelling are already inside YOU.

My price would have been $10k! Speakiing as someone from the UK, I'm amazed that excrement is carried around in open skips, over here closed slurry tankers are used. We have a saying over here for jobs like that, where there's muck there's brass, brass being euphemism for money.

after rain ,definely ,they will be an airborne from inside the tank(soil ,water,eyc ),when sun heat up ,water vabourise will carry all type of unknow good friend and start airborne journey....the tank owner should take responsibility of the sterilization job,before send to any people for repair...

That's disgusting ! ! ! I would have charged even more money for that job and charged again for the recall ( Liner Fiasco ) job ! ! ! ! !

I've got a saying I use quite often ! That is (CFS) Can't Fix Stupid ! And people that do damage like that , well that describes them very well ! I work in as a fork lift operator and boom lift operator and I see damage almost every day due to carelessness or Stupidity ! Hence (CFS) A suggestion next time if there is a next time tell them to have it pressure washed out at least !

my first job in the welding industry, was cast iron sewer pipes, for the local poop treatment center, no matter how well they were steam cleaned, l always went home smelling like l'd been up to my neck in shit.

My ex boss thinks it's fun to have to snake out sewer lines at his apartment buildings. He won't even wear gloves when he does it.

Not bad, looks like dewatered digested sludge. I got a 40yrd. roll off that had dead maggots, and smelled like a rendering plant. Rather making stink, and having the neighbors small this the whole time, I just mixed up some degreaser and bleach broommed the floor twice, got rid of 95% of the smell. When the driver came for pick up, turns out the previous haul was freezer food from Walmart that sat for days, before pick up, driver said the truck stunk after he dropped of to me.

I hope he had his mouth closed when he was hammering!

ur the best i wouldnt do it unless it was a friend begging me

Do you have a hydraulic bender mounted on your work truck. To bend up to 18" wide thinner plate. Perhaps using thru hole Portapower rams that you already own .

I would have said add some more zeros and it's a deal

I’d have had it steam cleaned Before I’d touch it , I did a lot of repairs and reclines on Sewage tippers & tankers

You're supposed to have a lot of immunizations doing that work. Particularly for hepatitis. Navy HTs could tell yea.

$1000 plus needs to be pressure washed first 👍🏻 lol

Hell I do one everyday if they wanted me to. Definitely wear ppe for it though

Do you have to be a bonified certified welder to start a mobile welding rig?

"Shitty job" perfect for the apprentice! I have been there!

I agree - charge the hell out of them!

hazardous tool cleanup time

Brother, do a review of your truck.We don't have one in Russia

You took the words right out of my mouth. I was just going to say it's a s***** job! 😆😆

That looked like as much fun as it is to change a composting toilet bin :)

A shitty job might be welding pressure piping in a basement of a sewage treatment plant. With shit spewing out of the pipes lol. Ive done a fair share of that. This job was definitely emotional damage. But in all seriousness all the carbon you breathe in air arcing, the death plume from plasma cutting, the flux core fumes from running large diameter wire, all the dust from and grit from the grinding and cutting abrasives is far worse my friend. Stay safe, protect yourself more on a daily basis. Keep up the great work, keep putting out great content but most importantly, be more vigilant on taking care of your health. 👍

Meltin Metal Anthony did a job in similar situation. No way would l do that job. Well done! I don't mind working with cow shit on farms where l have done a lot of repairs in and amongst livestock muck. But human waste, no way.

They lied about the liner to get you dirty. Couldn't they have washed that thing out?

My guy better have got paid and better be one step closer to not being a apprentice

Yep the driver hit it with the end of the bed on the truck. That's exactly what happened.

The plastic liner must have a big hole in it also.

I used love drivers like that.. if everyone was careful, there'd be less work. - I'd have cared less if they used it to store rhino-poo - we all wipe our butts - and that's gettin close to poo too... we used get all the "our crap-pipes collapsed & nobody wants to fix it!!" jobs as we cared less about stanky work - and the bills were similar too. Poo upps the price. :-)

Omg....run...run away!!!

If they called me they would have heard "click" as I hung up on them, no way I would even think about touching that without it being thoroughly cleaned. Another thing, why were they using that open top roll off to haul human waste and on top of that, where is the poly liner?

6:12 Oh shit isn't just an expression here!!!! ;o)

Now I watched the last half of the video I would tell them were to go

Always a “good story/job” when the famous first words are “NO”.... cant imagine the fine for leeking the bin on public right of way if caught!?!.....

Not a big deal don’t cry just do the job

Why on earth are they transporting sewage in an open bin, surely they should be using a tanker,a closed sealed truck, good grief !!!!

That's some thin ass plate you slapped on that pin.

Everyman has his price